Question about 2001 Chevrolet S-10

Open Question

How do i remove the front bumper and side skirts from 2001 s10 extreme?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: removal of front bumper

The bumper is secured using four 13mm nuts.

a) Open the bonnet and look for one 13mm nut on the lower inside of each headlight.
b) Remove the towing eye covers on the lower section of the bumper and you will find one 13mm nut in each.

Hope this helps.
Shane

Posted on Apr 09, 2010

  • 69 Answers

SOURCE: Chevrolet Cavalier Bumper

Headlight and parking lights are different

97 cavalier:
http://www.vanisletrader.com/images/97-chev-cavalier.jpg

2001 cavalier:
http://media.canadatrader.com/companies/2175/items/Normal/14-1779271186-F2CDEB43.jpg

Only way it would work is to do the 01 conversion by switching the whole doghouse (fenders, hood, bumper, lights, etc.) It can be done though.

Posted on Mar 28, 2009

hotratchet
  • 952 Answers

SOURCE: how to remove the front bumper of a 2001 honda

First you need a flathead screwdriver and the socket wrench set.
Pop open the hood and where the grill of the car is should be 4 black clips and you use the flathead screwdriver to take that off. Find the mm sockets that fit on the screws directly above your headlights, one on each side. After that's been taken out, there is one screw on the end of the bumper near the doors. You'd have to get a smaller mm socket to get those out, one on each side. On the bottom are a few more clips and two more screws. Using the same mm sockets that took of the screws above the headlights, take off the screws on the bottom of bumper.

Posted on May 01, 2009

  • 83 Answers

SOURCE: front bumper on my 2001 xterra is rusting. I want

Grab a factory service manual it will make it much easier, plus you may need to remove other parts as well. Here is link to a factory service manual for your 2001 Nissan Xterra.

Posted on Oct 10, 2009

Testimonial: "Thanks, will do."

MNfisherman
  • 11896 Answers

SOURCE: How to install front bumper cover on 2001 BMW E39

Installation of the Molding
Take the Molding Trim whether it is stock black or painted. Mine is black because my car is a year 2000. Painted side moldings were done in the year 2001. Snap them into place.
dscn5738%20copy.jpg 5 Installation of the Rubber Gaskets
From the stock bumper, retrieve the upper rubber gaskets unless you ordered new ones. Simply take a screw driver and pry a corner off to get you started. Wash thoroughly. NOTE which one belongs on which side.
Place the rubber gasket on the M5 Front Bumper onto its appropriate side. Top dscn5717%20copy.jpg The M5 Bumper is now Fully Assembled!!! Place aside where it can't be damaged.

Posted on Nov 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i put a suzuki aerio sx front bumper on the coupe?


They will bolt for sure. Make sure u get the side skirts kit that goes with the bumper

May 15, 2015 | Suzuki Aerio Cars & Trucks

1 Answer

Reolace front bumper 2001 ford focus ghia


raise and support front of vehicle, remove radiator grill, remove the headlamps, disconnect the wiring from the indicators and fog lamps.
undo the screws holding wheel arch liner to front wings (1 each side) and the screws (3 each side) securing the bumper to the wings.Release the 6 securing clips from the top of the bumper cover and the 3 from the bottom. with someone helping, pull out the sides of the bumper and slide forward. Fitting is in reverse order

Mar 14, 2015 | 2001 Ford Focus

1 Answer

Where do i locate horn on a 2001 ford focus


Hi there,

If your horn is not working, check the horn relay before anything else. Press the horn actuator on the steering wheel, and have someone listing within the engine compartment for a distinct 'clicking.' If you hear it, then it's working and the horn component itself may be malfunctioning. The horn looks like a square-mouthed snail shell and should be just behind the front bumper skirt on the driver's side. More or less beside the fog light assembly.

Good luck.

Feb 24, 2015 | 2001 Ford Focus

1 Answer

Where can I find instructions on removing a front bumper on a 2001 ford focus


There are 4 bolts (upper) that fixes the bumper, under the bumper, there are bumper sliders as well as the sides. Remove the 4 bolts, fender linings and slide off bumper clips from the sliders

Jan 27, 2015 | 2001 Ford Focus

1 Answer

How to remove 1996 accord fender


Remove bumper only the side u need,bolts or plastics clips on top, two or three under the radiator support for bumper, remove head light, under the fender by the end of the bumper is a bolt for the bumper and other for the fender, 4 bolts on top, one bolt inside bi the door hinge, one or two in the bottom under the side plastic skirt .

Jun 04, 2014 | 1996 Honda Accord

1 Answer

How do you replace a bumper bar ....do you need a whole new skirt


Bumper bar? Skirt?
There is a bumper reinforment behind the bumper cover.
Front or rear???
Either way there are some plastic retainers on top. You may need to remove a grill which would have some sort of retainer. The retainers usually have a center section that prys up some and the retainer will then pull out.
There should also be some retainers on the undersides of the bumper covers.
There is just about always a bolt going up through the bumper cover into the rear quater panel or front fender right in the wheel well edge. Sometimes there is a guide that the cover slide onto as well. You may need to remove the tail lights. There will be nuts on the inside behind the trim panels or the headlights. they usually have some clearly seen bolts holding them in (about 4 give or take)
Unplug any lights and they can usually be left in the bumper cover.
Then off comes the cover.
From there you may find a styrofoam pad. Don't lose that as it helps the cover keep its shape in the heat. And either the reinforment will be bolted or welded to the frame rails.

Sep 06, 2011 | 2007 Toyota Camry

1 Answer

How do I remove the headlamp unit on a Jaguar S type 2001 I can only see two nuts one top centre and one to the left and three or four inches lower slightly to the right of the main beam looking from the...


Front bumper requires removal to gain acsess to the lower 10mm bolts. Bumper comes off by removing the 2 10mm bolts on the top of the bumper then unscrew the 2 T30 screws in the front wheel arch liner (bumper side) and then you will be able to see a 10mm bolt reversed into a bracket at the top of the bumper from a inside veiw, remove and repeat for the other side. Then its 3 10mm bolts that secure the front under tray (if yours has one). Then there will be another 10mm bolt to the wing side of the headlamp from a above veiw. Bumper should then just pull off and watch for the connector for the fog lamp harness.

Just the 2 lower headlamp bolts andit should pull from its housing

Mar 04, 2010 | 2001 Jaguar S-Type

1 Answer

The foot step ground skirt around the truck, the


Lower front valence, but Ford may call something else.

Feb 14, 2010 | 1995 Dodge Dakota

1 Answer

Front turn signal replacement 2001 camaro- cannot get it to seal


take your skirting loose on the bottom side of the bumper and go in that way

Jun 21, 2009 | 2001 Chevrolet Camaro

Not finding what you are looking for?
2001 Chevrolet S-10 Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...