Question about 2000 Pontiac Sunfire

1 Answer

It all started with my signal lights. they would not turn on or blink when engaged. and then the next time they would work. i checked all the fuses and bulbs all are good.. then just the other day my temp gage stops reading, and then my dash lights. now i have no gas gage.. could it be the wireing harness? how much would a fix be or is it even worth it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 436 Answers

Check the ground from the battery to the battery box make sure the bolt to the box is tight and not broken, If you ever had a battery leak then battery acid could have eaten the wire harness. just look it all over. good luck

Posted on Oct 08, 2009

Testimonial: "thankyou for the help, but that is not the problem either.. do you have any other suggetions. if i can narrow it down it will help. thankyou."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My turn signals dont work, the emergency lights work, and the brake lights work, whats the problem?


The device that flashes the lights is not working or that same device is not receiving power.

May 24, 2016 | Cars & Trucks

1 Answer

The dash board lights and internal lights on my 2002 Toyota Echo did not turn on while driving home tonight. Also, the left side turn signal is flashing rapidly. Is this a blown fuse and wear is it?


The first thing to do for your dash lights is to verify the fuses, if ok check your lights dimmer next. Sometimes, dimmers fail to provide good contact due to wear or poor filament contact. Otherwise, there is a poor connection somewhere.
Usually, a rapidly blinking turn signal is due to a burnt bulb on the side in question or a bad ground connection either in the front or the back of the vehicle. Turn the left signal on and check if front and back turn lights are on and working if one doesn't work check the bulb. If it is poorly lit and not blinking check the socket and ground connection.
Hope this helps you!
Fernie

Mar 10, 2015 | 2002 Toyota ECHO

2 Answers

Front light next to the headlight does not work. All other lights work fine except the rear right turn signal blinks fast.


Depending on the make model and year, I would say you are talking about the front turn signal lamp. Thats why the signal flashes fast.
I would check the socket for power and ground next.

Dec 05, 2014 | Cars & Trucks

2 Answers

Turn signal flashes fast but bulbs good


Under the dashboard there is a round metal device called a flasher its where the tick noise comes from when you activate your turn signal I would try replacing that next Good luck

Apr 04, 2014 | Toyota Camry Cars & Trucks

2 Answers

Trun signal wont work


First check the turn signal fuses.The turn signal fuse is fuse number 8 in fuse box.If the fuse checks out ok then the next thing to check would be the Turn Signal Flasher Unit. Power flows from the fuse to the flasher and then to the T/S switch. You should have power to the dark blue wire at the flasher. If you do then check for power at the purple wire at the T/S switch connector. If you have power there, then you have a bad switch. If not, then you have a bad T/S flasher unit or an open in the power side of the circuit.

Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Aug 27, 2010 | 1991 Chevrolet Lumina

1 Answer

Driver front turn signal does not blink. front


This may have more then one bulb in the front or possibly a bad socket try wiggling the new bulb in the socket to see if it will work.Compare all turn signal lights that come on the passenger side to those drivers side.Some vehicles also incorporate sidemarker lights with the turn signals.

May 29, 2010 | 2001 Pontiac Aztek

1 Answer

On my 1994 ford ranger my turn signal don't work at all


Turn signals depend on a small relay switch to function. It makes an audible clicking noise when the signal is engaged. If there are no blown fuses in your box, then this is my next suspect.
This relay switch is typically located under the dash near or on the fuse box panel. Even on a 1994, this relay should be a plug and play item.

Other thoughts. Make sure all bulbs are working. Some older models come on but won't blink when a bulb is out. There are other relays mounted in a box under the hood. Check all your fuses, and relays... before tearing it all apart.

Do your hazard lights work? If these are out as well, then its a sure bet that little relay is bad.

Jul 07, 2009 | 1993 Buick LeSabre

1 Answer

Turn Signals


yea ok i looked it up i meant to replacethe thermal flasher. unless this is what you said you did already. it in the inside fuse box. here is a link to what it look like . thermal flasher.
http://auto.howstuffworks.com/turn-signal2.htm

anyways id check all the connection next to see if they are loose.
keep me posted

Apr 01, 2009 | 1993 Nissan Altima

1 Answer

98 Hyundai Elantra turn signal and hazards only work sometimes.


You need to replace the fuse - have a look at the manual and see which fuse it is buy a new one put it in and it should be fine - the on off thing is where the fuse wire touches and then moves again.

Dec 29, 2008 | Hyundai Motor 1993 Excel

3 Answers

Blinkers not working


Did you check the bulbs? If one bulb is burned out, the blinkers won't word on that side. You could have one bulb burned out on each side. Start the car, put left signal on. Check front and back lights. Is one light on but not blinking? If that's the case, the light that's not on at all is burned out and has broken the circuit so the good light stays on and won't blink. Check the other side. You also have a 'flasher' , actually 2. One for emergency flashers, one for the turn signals. It could be that the turn signal flasher is shot. You just have to unplug it to remove. It's probably located near the fuses. good luck countrycurt0

Aug 10, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Pontiac Sunfire Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...