Question about 1993 Chevrolet K1500

3 Answers

Tail lights have stopped working no bad fuses no bad bulbs. no reverse lights or break light.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The light boards in the tail lights are bad about shorting out. They are not expensive to replace. Always make sure to check the plugs for corrosion too.

Posted on Oct 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Check where the tie in is made for the trailer brakelight assembly, check for loose or broken wires and connections

Posted on Oct 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Check the relay and for loose ground

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

If the break lights in my 1986 c corvette works but the tail lights do not, what could be the cause


Blown fuse ,bad headlight switch,or wiring issue.
the tail lights have there own fuse and are powered through headlight switch. Do the front running lights come on? If none of them work, switch could be bad if front work and rears dont, check bulbs and power to them when lights are on

Mar 17, 2015 | Cars & Trucks

1 Answer

I have a 2000 chevy malibu and my tail lights are not working when my head light are on. They only work when I use the turn signals, breaks, or reverse. Can some one give me a solution. I have replaced the...


did you change the correct fuses! Locate the fuses in slot 22 and 23. they are in the underhood fuse box. drivers side left. Good-Day! you may also have a bad ground on tail lights.

Jun 10, 2014 | Cars & Trucks

2 Answers

2000 jeep grand cherokee none of the rear lights work


Check BackUp Module, generally is located in the rear quarter panel (drivers side).

Dec 23, 2012 | 2000 Jeep Grand Cherokee

1 Answer

None of my tail lights work. i changed the bulbs, tail light control board and fuses. I'm an electrician so i need a wire diagram of a 1996 chevy suburban


Your solution is a new combination switch,It also sounds like the hazard are activated and is non operation interfering with the brake light,but either way the solution is a combination swith

Jul 08, 2012 | 1996 Chevrolet Suburban

2 Answers

Tail light doesnt turn on with headlights but works fine as a break light and turn signal, why?


in the rear lights you may have two bulbs one is the turn signal the other one is stop light / tail light the stop light / tail light has two filaments, one for the stop light (21 watt) & one for the tail light (5 watt) it is possible that the tail light filament is blown, try replacing the bulb to see if that fixes the problem,also check all the fuses as well.......hope this helps......cheers.

Aug 15, 2011 | 1994 Cadillac DeVille

2 Answers

1988 pathfinder no dash lights no revers lights no tail lights no gaiges


If they all stopped working at the same time then it is probably a fuse or possibly 2. Check your fuse panels in the dash and under the hood. The dash lights and gauges should be a fuse labeled instrument cluster or guages, it is probably blown. The other fuse to look for will be the tail light fuse. This is where I would begin.

Sep 23, 2010 | 1988 Nissan Pathfinder

1 Answer

All fuses are good, lights bulbs are new whats wrong? but tail light work


check the break light switch it is should be at the top of the brake pedal you can unplug it and jump plug with a paper clip to test if lights work switch is bad

May 27, 2009 | 2000 Toyota Celica

1 Answer

No dash lights and no tail lights


Check for faulty wires at the fuse block, had one fall off from the block itself from the rear, or it could be a wire break somewhere along the way.

Stop Lights and Blinkers are independant fuse.

Tail lights are on there own fuse and could be a wire break in the rear or removing the bulb and using a metre check for signal at bulb socket where trouble is, Check for disolored connections, Green in color or simular, could be a bad connection which in turn is not letting the curent to other side, Causing a short and loss of power to all remaining lights in curcuit.

Sep 15, 2008 | 1999 Chrysler Town & Country

1 Answer

Nissan Quest 2004 Tail Lights


Robynumber1,

Thanks for the email back. The nissan quest tail lights werenot operating, but the break lights were working. This was ultimately caused by a blown fuse. The fuse was blown by loose trailer lighting wires dragging on the ground, thus shorting. Problem fixed.

Aug 17, 2008 | 2004 Nissan Quest

Not finding what you are looking for?
1993 Chevrolet K1500 Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...