Question about 2007 Ford Edge SEL Plus

1 Answer

I need to replace my tail light on a Ford Edge. How do I do this?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

Open the lift gate, remove the 2 or 3 8mm hex screws on by the light housing, and then pull outward on the lens. Then grab the bulb socket and twist counter clockwise, turn about 90 degrees and pull out., pull the bulb out and then reverse to re-assemble. don't be afraid to use some force to get the lens out if you need to, but it shouldn't feel like the lens is going to break.

Posted on Oct 07, 2009

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
michigan man
  • 3533 Answers

SOURCE: replacing tail light assembly

you will need to open the trunk remove the trunk cover and it is normally a 10mm socket and then all you do is unplug the wires and put the new one in the same way you took the old one off

Posted on Jan 17, 2009

  • 878 Answers

SOURCE: i have a ford edge

try some local junk yards and yes you can replace it your self

Posted on Apr 13, 2011

SOURCE: What is the recommended bulb

It is in your owners manual

Surely you have one, since the vehicle is
only a year old

You could remove the burnt one & read what it is !!

Posted on Jul 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the recommended bulb replacement for a 2010 Ford Edge for the brake/turn/tail light?


It is in your owners manual

Surely you have one, since the vehicle is
only a year old

You could remove the burnt one & read what it is !!

Jul 31, 2011 | 2010 Ford Edge

1 Answer

Need instructions on how to replace a Ford Edge Rear Indicator Light. Thanks!


I was looking for the instructions for your tail light removal and came across a detailed description on how to access the tail lights. Here it is:-

http://www.paulstravelpictures.com/Ford-Edge-Tail-Light-Bulbs-Replacement-Guide/index.html

Apr 11, 2011 | Ford Edge Cars & Trucks

4 Answers

Need fuse panel Diagram


What year, model and cylinder number?

Mar 16, 2011 | Ford E-350 Cars & Trucks

1 Answer

I need to know how to access the bulbs in the taillight assembly on a 2004 ford explorer


Hi there,

Open the rear liftgate. On the inner edge of each tail light assembly you will find two screws. Remove the two screws. Now grasp the plastic tail light assembly firmly, and pull it strongly backwards. It is held in place with three spring-loaded clamps. Once the clamps release, it will pop out.

There are two lamp harnesses attached to the tail light assembly - one for the reverse lamp, and one for the running/brake/turn signal lamp. To remove either lamp harness from the tail light assembly, turn the harness 1/4 turn counter-clockwise, then gently pull it out of the assembly. The light bulb can be easily pulled from its socket in the lamp harness once removed from the assembly. Installation is reverse of removal.

Glad to be of help...

Jan 23, 2011 | Ford Explorer Cars & Trucks

1 Answer

Change out a taillight


You want to change the tail light bulb?

The process for replacing tail light bulbs is the same in all models. If you have a burnt-out tail light bulb, you may need to replace the brake light, the reverse light or the turn signal. The procedure to replace each of the bulbs is the same.



    Instructions

    1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.

    2. Remove the two screws from the tail light assembly. Pull the tail light out and inspect the back for two bulbs. The top bulb is the brake light and turn signal. The bottom bulb is the reverse bulb. Determine which bulb you need to replace.

    3Rotate the bulb's socket counterclockwise to disconnect it. Unplug the bulb from its socket.

    4Push the replacement bulb into its socket firmly. Insert the socket back into the tail light. Turn it clockwise to secure it in place.

    5Place the tail light into its cradle. Hold it with one hand and replace the Phillips head screws with the other.

Dec 03, 2010 | 2008 Hummer H3

1 Answer

The plastic broke in the wing tail light on my trunk, how do i find the replacement part and replace it


Wing tail light? Depends , you can get it from the dealer or just Google what light you need, like 2000 Ford tail light? But I guess what year your truck is a secret.

Sep 02, 2010 | Ford Taurus Cars & Trucks

1 Answer

I need to change the brake light bulbs in my 2002 ford courier


This is a pretty simple DIY I just didi it last Saturday! When you open the hatch there are 2 robertson screws on the side of the door seal where the tail lights meet the door opening. Remove both screws and pull the tail light lens straight out towards you trying not to pull the inside out much further than the other side (it is held in with clips on the outer edge that may break. The whole light assembly will come out in your hands with only the bulb holder wires keeping it attached. The bulbs twist 1/4 turn to remove and easy replacement of the bulb. Do the reverse to replace! Hope this helps

Feb 10, 2010 | 2005 Ford Freestyle

2 Answers

Need to replace busted tail lens on F150 2001 SuperCrew


open the tailgate and there should be 2 screws on the side of the bed remove those screws and pull the light assembly out.

Oct 02, 2009 | 2001 Ford F150 Styleside SuperCrew

Not finding what you are looking for?
2007 Ford Edge SEL Plus Logo

2,073 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...