Question about Honda Accord

1 Answer

I have a 98 Honda Accord and the problem is it won't shift out of Park when the brake pedal is applied. I just changed the shift lock solenoid that's next to the gear selector and i'm still having the same problem. And now I noticed that when I press the brakes, I have no brake lights and it won't shift into to gear (reverse or drive) but sometimes it'll engage cause I can hear the solenoid engage and I get brake lights and it works fine for a few seconds then I try it again and it doesn't work. Someone please help!

Posted by on

  • gionihay Oct 08, 2009

    You mean spent a little over one hundred dollars on the solenoid and the problem is a 30 dollar part? Boy do I feel dumb!

  • gionihay Oct 08, 2009

    Very helpful. Hope it works.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 75,822 Answers

The Root cause of this problem is the brake lights being inoperable at times, replace the brake light switch, the switch is located near the top of the arm the brake pedal is attached to, u will need to remove a panel and look under the dash to see it, here is the part number for the switch, very easy to replace, get the new switch 1st then replace it, the new switch will act as a guide to IDing replacing the old one. I assume you have cruise control

STANDARD MOTOR PRODUCTS Part # SLS241
W/ CRUISE CONTROL $ 27.79

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to remove center console in 2007 buick Lucerne, stuck in park


Do you know why it's stuck in park ? Do the brake lights work ?
Automatic Transmission Shift Lock Control Description and Operation (Floor Shift)
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
• The automatic transmission shift lock solenoid (serviced as the automatic transmission shift lock actuator), as well as the body control module (BCM) and the engine control module (ECM)/powertrain control module (PCM). The shift lock solenoid is located within the floor shift control assembly with vehicles equipped with floor shift.
• The BCM controls the voltage supply circuit of the shift lock control solenoid. The following conditions must be before the BCM will supply voltage to the shift lock control solenoid.
The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock solenoid:
• The ignition is in the ON position.
• The ECM/PCM sends an input via GMLAN serial data to the BCM indicating the transmission is in the PARK position.
• The BCM determines the brake pedal is applied according the brake pedal position.
Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically unlocking the shift lever allowing the driver to move the shift lever out of the PARK position as the solenoid energizes. When the brake pedal is not applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid mechanically locks the shift lever in the PARK position.
During remote start operation, the BCM will de-energize the shift lock control circuit, locking the shift lever in the PARK position.
Do you know what DTC'S are ?
DTC B2705 Gearshift Unlock Circuit !
The body control module (BCM) controls the shift lock solenoid by providing battery voltage to the shift lock control solenoid. The BCM utilizes a smart driver to control the voltage supplied to the shift lock solenoid. The smart driver monitors the voltage and current flow of the control circuit.

Transmission Control Lever Malfunction (Floor Shift)
Circuit/System Verification
Ignition ON, while pressing the brake pedal, observe the scan tool Brake Applied Output Signal parameter. The reading should be ON with the brake pedal pressed.
? If not the specified value, refer to Stop Lamps Malfunction .
Press the brake pedal, the vehicle operator should be able to move the shifter lever out of the park position.
With the vehicle moving over 5 km/h (3 mph), the vehicle operator should not be able to move the shift lever into the reverse position.

May 25, 2017 | Buick Cars & Trucks

1 Answer

Where is module on brake peddle for shifting out of park on cadilac srx4 2007


There is no module on the brake pedal . There is a brake switch , do the brake lights work ? If the brake lights work switch is ok .
Automatic Transmission Shift Lock Control Description and Operation
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
• The automatic transmission shift lock solenoid (serviced as the automatic transmission shift lock actuator), as well as the body control module (BCM) and the engine control module (ECM). The shift lock solenoid is located within the floor shift control assembly with vehicles equipped with floor shift.
• The body control module (BCM) controls the voltage supply circuit of the shift lock control solenoid. The following conditions must be before the BCM will supply voltage to the shift lock control solenoid.
The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock solenoid:
• The ignition is in the ON position.
• The engine control module (ECM) sends an input via GMLAN serial data to the BCM indicating the transmission is in the PARK position.
• The BCM determines the brake pedal is applied according the brake pedal position.
Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically unlocking the shift lever allowing the driver to move the shift lever out of the PARK position as the solenoid energizes. When the brake pedal is not applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid mechanically locks the shift lever in the PARK position.
During remote start operation, the BCM will de-energize the shift lock control circuit, locking the shift lever in the PARK position.

Your best bet ,have it towed to a qualified repair shop !

Oct 15, 2016 | 2007 Cadillac SRX

2 Answers

Will not come out of park. Button stuck


Automatic Transmission Shift Lock Control Description and Operation.
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
• The automatic transmission shift lock solenoid (serviced as the automatic transmission shift lock actuator), as well as the body control module (BCM) and the engine control module (ECM). The shift lock solenoid is located within the floor shift control assembly with vehicles equipped with floor shift.
• The BCM controls the voltage supply circuit of the shift lock control solenoid. The following conditions must be met before the BCM will supply voltage to the shift lock control solenoid.
The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock solenoid:
• The ignition is in the ON position.
• The ECM sends an input via GMLAN serial data to the BCM indicating the transmission is in the PARK position.
• The BCM determines the brake pedal is applied according the brake pedal position.
Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically unlocking the shift lever allowing the driver to move the shift lever out of the PARK position as the solenoid energizes. When the brake pedal is not applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid mechanically locks the shift lever in the PARK position.
During remote start operation, the BCM will de-energize the shift lock control circuit, locking the shift lever in the PARK position.
Circuit/System Description
The body control module (BCM) controls the shift lock solenoid by providing battery voltage to the shift lock control solenoid. The BCM utilizes a smart driver to control the voltage supplied to the shift lock solenoid. The smart driver monitors the voltage and current flow of the control circuit.
Diagnostic Aids
• Use a scan tool to verify there are no brake pedal position sensor and/or transmission internal mode switch (IMS) DTCs set that could cause the BCM not to provide battery voltage to the A/T shift lock solenoid.
• If the automatic transmission shift lock control circuit is shorted to battery positive voltage, the A/T shift lock solenoid will be inoperative. The vehicle will shift out of PARK without depressing the brake pedal.
Your best bet is have it towed to a repair shop !

Feb 03, 2016 | 2008 Saturn Aura

1 Answer

Can't shift my Chevrolet Uplander out of park.


The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
?€¢
The automatic transmission shift lock control solenoid


?€¢
The body control module (BCM)


?€¢
The powertrain control module (PCM) or the transmission control module (TCM).

The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock solenoid:
?€¢
The ignition is in the ON position.


?€¢
The PCM / TCM sends an input to the BCM indicating the transmission is in the PARK position.


?€¢
The BCM determines the brake pedal is not applied according the brake pedal position.

Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically locking the shift lever in the PARK position as the solenoid energizes. When the brake pedal is applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid releases the mechanical lock allowing the driver to move the shift lever out of the PARK position. When the transmission is out of the PARK position, the shift lock control solenoid remains de-energized.
The body control module (BCM) controls the A/T shift lock control solenoid by providing battery voltage to the A/T shift lock control solenoid. The BCM utilizes a smart driver to control the voltage supplied to the A/T shift lock control solenoid. The smart driver monitors the voltage and current flow of the control circuit.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC B2705 Gearshift Unlock Circuit
You could have a bad brake light switch , automatic transmission shift lock control solenoid.
the BCM or wiring problem
Install a scan tool. Turn ON the ignition, with the engine OFF. Press and release the brake pedal several times while observing the BTSI solenoid parameter in the body control module (BCM) output data list

Jan 17, 2016 | Chevrolet Cars & Trucks

2 Answers

Why won't 98 Buick century shift into any gear?


is it a linkage issue? if the shift lever is working and you can feel the detents, check your fluid make sure it is full and clean, if not you could have internal issues with the trans

Oct 30, 2015 | Buick Cars & Trucks

1 Answer

Gear changes from P without brakes being applied


The park lock on the shift is an electrical operated solenoid by the brake light circuit, sounds like the solenoid has gone faulty and stopped working in the unlocked position, Need to test the circuit and solenoid.

Jan 23, 2014 | 2011 Honda Accord

1 Answer

Shifter is stuck in park on 1997 honda accord


just press the brake pedal then shift the transmission not try to check the shifting lever remove the cover there is a electric solinoid connected to the brake pedal apply brake the solinoid innergize time to shift the lever if not change the solinoid

Jun 17, 2013 | Cars & Trucks

3 Answers

1999 Honda Accord EX won't shift out of park. It is stuck. I think it's the shift lock solenoid but I'm not sure. How do I get the car out of park. I pushed the brake in but the button on the gear shifter...


If you press the Break pedal and the shift button does not engage, Your Solenoid did not activate to release it out of park. either the: solenoid is out - Bent levers - Solenoid harness disconnected - Break activation wire may be damaged. this piece is easy to replace as it sits on the right side (passanger side) of the shift lever. remove center console cover to access the soleniod which is held on by two 10mm nuts. and a C- clamp

May 06, 2010 | 1999 Honda Accord

1 Answer

My 1992 honda Accord wont shift out of park, the brake lights work still but have to use manual shift override button to get ouy of park


The interlock solenoid is provide with power by the Transmission control module (tcm) when the brake pedal is applied3f09359.jpg and then grounded by the gear selector switch in park. If you access the connector to the tcm, you can check to see if it's getting a ground signal and check the solenoid. Pull the harness connector off the tcm and apply 12v to the harness connector pin that leads to the white wire with a green stripe as seen in the diagram. If the solenoid clicks, you may have a bad tcm. If the solenoid does not click, you may have a bad solenoid, or bad selector switch. The tcm is under the front passenger footwell.

Feb 03, 2010 | 1991 Honda Accord

1 Answer

1998 Honda Accord 4 cylinder


sounds like your neutral safety switch on your brake pedal is wearing out.it can be adjusted to engage the brake pedal sooner.thanks for using fixya!

Jul 30, 2008 | 1998 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...