Question about 2000 Nissan Frontier

1 Answer

Difficult shifting from first to second and second to third

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Clutch may be worn,may need replacing ,but first check system for fluid leak, cneck fluid level and condition, if black in colour then you have worn seals, you can replace seals but i recomend replacing components with new ones becouse the bore of master and slave cylinder can also wear causing seals to leak, note: when servicing clutch system you change clutch and preasure plate and fly wheel if out of spect.

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my truck shudder when shifting into a higher gear with manual transmission 83 F100 Straight Six


not knowing the quality of workmanship used in the engine rebuild, it is difficult to answer exactly what is wrong
plugs and leads will not be faulty
I think the clue is in the remark about the carby being replaced and it ran a bit better
that indicates ,along with the very rich settings, that it could be an valve timing problem
I suspect that the cam shaft lobes are damaged or the timing chain gear is loose on the cam shaft
running well in the beginning and then slowly failing all points to the cam shaft lobes, cam followers or loose cam gear

Aug 26, 2016 | Ford Cars & Trucks

2 Answers

Transmisson wont shift from second to third


you may try reving engine alittle higher try shifting to fourth if that works your third gear sincroniser is shot

Jun 08, 2014 | 1998 GMC Sierra

1 Answer

Electronic pressure control solenoid circuit p1745. Check engine light on 2000 ford escort, 4cl, automatic. Advance auto told me it was a dealer part but I can't find it on any of the ford websites?...


Here is what the service manual says about the EPC solenoid, the processor looks at allot of different inputs to command the solenoids, such as Throttle Position Sensor, Vehicle Speed Sensors, Transmission Range Sensor and RPM signal, The PCM controls the shift patterns for the transmission. Electronic Pressure Control (EPC) Solenoid
The electronic pressure control (EPC) solenoid is located on the main control valve body and is controlled by the PCM. The EPC controls line pressure used to apply and release clutches and bands in the transmission.
The 2-3 shift solenoid is located on the main control valve body and is switched on and off by electrical signals from the PCM. The 2-3 shift solenoid activates the 2-3 shift valve which controls the automatic shifting between second and third gear. Second gear is established when the 2-3 shift solenoid is switched on. The 2-3 shift solenoid is switched off when vehicle speed increases and requires a second to third gear upshift.
The 3-4 shift solenoid is located on the main control valve body and is switched on and off by electrical signals from the PCM. The 3-4 shift solenoid activates the 3-4 shift valve which controls the automatic shifting between third and fourth gear. Third gear is established when the 3-4 solenoid is switched off. The 3-4 shift solenoid is switched on when vehicle speed increases and requires a third to fourth gear upshift.

Mar 23, 2013 | Cars & Trucks

1 Answer

I have a Toyota Corolla AE 100 manual gear shift gets stuck


why my 2006 corolla car gearbox is stuck in third gear and cannot move

May 29, 2010 | 1991 Toyota Corolla

1 Answer

My transmission slips going through second gear if i get my foot in it just a little bit, and it doesnt always go into reverse. if i shift into reverse and it doesnt shift, i have to shift to neutral then...


this problem is a common failure associated with your shift solenoinds inside your tranny. of course a shop is not gonna tell you this because by the time you wanna get it repaired it is usually too late and have already cause damage to your clutch pack and internal parts, thats the main reason why a shop wont mess with just replacing your shift solenoid (aka valve bodie)

Feb 18, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

31th 470 a670 trans won't shift from second to third


I am far from a trans. specialist but this sounds like a foreign body (dirt maybe) got in the valve body.

Oct 14, 2009 | 2002 Dodge Neon

2 Answers

MY TRANS WONT SHIFT INTO THIRD GEAR UNTIL IM DOING 45 MPH IT SHIFTS FINE IN FIRST AND SECOND GEAR WHEN IT IS IN SECOND GEAR AND WONT SHIFT TO THIRD I CAN PUT IT IN N AND BACK TO OVERDRIVE THEN IT SHIFTS.


Most likely your shift cable (from the selector to the transmission) is worn, maybe needs lubrication. Mine had a similiar problem, but had to shift it into neutral and back up to get it in reverse. A new shift cable solved the problem.

Jul 27, 2009 | Lincoln Town Car Cars & Trucks

1 Answer

NO SECOND GEAR IN TRANNY


sounds like what happened to my camaro. it sounds like a stuck valve. i suggest taking it in for an estimate at a transmission specialist.

Mar 18, 2009 | 1996 Chevrolet K1500

Not finding what you are looking for?
2000 Nissan Frontier Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...