Question about 1996 Geo Tracker 2 Door

2 Answers

Need to install new timing belt on 96 geo tracker. is this a difficult job?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

Http://www.kick-fix.com/t-belt/16-fast-belt-install.html

or just see how i did mine.
every step.

Posted on Oct 22, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

No it is fairly simple if you have any mechanical ability at all. Buy you a repair manual at your local auto parts store, it tells you step by step how to replace it. Just be sure to get the timing mark on crank pulley ligned up with TDC on the cover before you remove the pulley, don't disturb the crank position by turning the cam/belt when replacing the belt. You can slide the pulley back on withtout tightening it to double check your alignment marks before you button it all back up. Notch on crank is up, one on cam is down.

Posted on Oct 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need cam to crank diagram for 1997 geo tracker


my wild guess, timing belt change out?
or valve lash or , no matter it's all here.

this is the G16B engine,
this full timing belt page, is here. and has link to actual FSM page.
http://www.fixkick.com/t-belt/16-fast-belt-install.html


related issues here

http://www.fixkick.com/t-belt/tbelt-index.html

Apr 18, 2014 | 1997 Geo Tracker 2 Door

1 Answer

Engine accesories brackets 1996 geo tracker


correcting an old post.
Do not listen to the guessing persons. this car is a V belt car. all are, by Geo 1.6L 89-98 (1.8L Suz, different car and matter)
the 96 tracker is a 1.6L SOHC motor,
they are sold with and with out A/C or P/S. "options"
so are set up 4 different ways, ( i have the full 96 parts list)

try this.
http://www.fixkick.com/belts.html

Mar 19, 2013 | 1996 Geo Tracker 2 Door

1 Answer

How to change a water pump on a 96 geo tracker


if the pump was driven by the timing belt you probably installed the timing belt wrong, this is common if the cam and crankshaft pulleys are not lined up properly the base timing of the motor will be off. get the book(Haynes or Chiltons) and check your marks.

Aug 17, 2012 | Geo Tracker Cars & Trucks

1 Answer

A/c compressor makes screeching noise in geo tracker 96


This is just a guess but the screeching might not be the compressor. You might need a new drive belt and make sure you put belt drive dressing if you replace it.

Jul 27, 2012 | Geo Cars & Trucks

1 Answer

Setting timing


There is a video of the whole job by another Geo Tracker owner posted on YouTube. Please go to this link

Jul 16, 2012 | 1991 Geo Tracker

1 Answer

No just finished a valve replacement on 92 geo tracker 8v eng. set crank to TDC on #4 cyl and the cam to the proper alignment notch on rear valve cover and installed the new timing belt. However after all...


When timing belts are installed, the normal position of the crankshaft is for #1 cylinder to be at TDC. Here is a picture of the timing belt routing and the timing marks.

chuckster57_44.gif

Jun 04, 2011 | 1992 Geo Tracker

3 Answers

I need a diagram of engine timing marks for a 1.6 litre engine


1996 Geo Truck Tracker 2WD 1.6L MFI SOHC 4cyl

2efa731.jpg

Fig.: Before installing the timing belt, position the camshaft sprocket (1) so that the timing mark on the sprocket (2) is aligned with the notch (3) on the inside timing belt cover (4) ...

5a2ee07.jpg

Fig.: ...and ensure that the crankshaft sprocket (1) timing mark (2) is aligned with the mark on the oil pump (3)

For more details, can register in autozone.com (free).

I hope help you with this (remember rated this help) Good luck.

Oct 15, 2009 | 1996 Geo Tracker 2 Door

1 Answer

96 Geo Tracker Belt Removal Problem


it has more than one bolt.
loosen them all.

May 08, 2009 | 1996 Geo Tracker 2 Door

Not finding what you are looking for?
1996 Geo Tracker 2 Door Logo

1,030 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...