Question about Pontiac Sunfire

Open Question

My remote autostart wouln't start my car. I changed the battery but it still won't start. The on/off switch is on and it worked for me all of last winter.What do I do?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MECP Guy
  • 344 Answers

SOURCE: when I try to use my autostart my panic alarm

try unlocking the doors with your factory remote first then press your remote start button, if it starts without your panic alarm sounding you need to check under the dash and make sure that the disarm wire is hooked up securly to the purple wire at the bcm

Posted on Jan 25, 2010

marknphyll
  • 197 Answers

SOURCE: My remote car starter from autostart on a grand am 03 won't start or locks won't work after it died for about a week then changed the batteries

Check to be sure the new battery is a good new one, they set on the shelves for some time ya know. Then make sure it goes in the correct direction.Then refer to your owners manual if it needs reprogrammed.

Posted on Feb 18, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 mazda3 with autostart remote 2510 doorrs ,locks work it will start when key is in on position but will not when key is out. it sets up lights come on but does not start and then park lights flash


you will need to check all you fuses on the car its self and for the remote start system. also there is usually a switch to turn off the start function. the switch could be off or bad also. hope these few tips help. you could also have a loose wire to the starter or the relay could have went too. good luck.

Nov 29, 2014 | 2005 Mazda 3

1 Answer

Starter motor


98 swift
the battery is weak ,discharged or bad, change it.
try jumper cable starts.
if that works try a charged battery now. or clean the terminals first.
if jumper cable start fails , then hot wire the starter.
using a jumper wire. (see key line link below)
if that fails the starter is bad.
if that works the key line is dead.
is caR A/T or m/t tranny?
we cant guess that. so.....
if M/T the clutch switch is bad.
if A/T the PRNLD switch is bad, try cranking in NEUTRAL ?
if input to both switches is dead, then igntion start switch is bad.

the method works on all cars , older that about 2007.
newer cars have autostart , remote start and other complex bs.

http://www.fixkick.com/nocrank.html


Mar 18, 2014 | 1998 Suzuki Swift

1 Answer

2000 toyota corolla autostart stopped working


place the remote on the start button to depress it,if it start,replace the remote battery.

Jan 28, 2014 | 2000 Toyota Corolla

1 Answer

Autostart after battery disconnected blue light


do any other functions of the fob work?-Denny

Nov 03, 2013 | Cars & Trucks

1 Answer

My remote car starter from autostart on a grand am 03 won't start or locks won't work after it died for about a week then changed the batteries


Check to be sure the new battery is a good new one, they set on the shelves for some time ya know. Then make sure it goes in the correct direction.Then refer to your owners manual if it needs reprogrammed.

Feb 18, 2013 | Cars & Trucks

1 Answer

1995 ford contour cranks but won't start, change fuel filter, fuel pump, and spark plugs. Not getting any spark.


Have you ever heard of testing before replacing parts ? Fuel pressure an flow tesing , testing the electrical circuit for the fuel pump , amp draw testing , voltage drop testing etc... Thier are no magical fixes in auto repair . No spark ! check B+ voltage an ground circuits for the ignition system , Ignition System Designs Operation and Testing an SD Premium video

Jun 18, 2017 | 1995 Ford Contour

1 Answer

When I try to use my autostart my panic alarm sounds, It does it with both remotes and I changed out the batteries. any idea?


try unlocking the doors with your factory remote first then press your remote start button, if it starts without your panic alarm sounding you need to check under the dash and make sure that the disarm wire is hooked up securly to the purple wire at the bcm

Dec 29, 2009 | 2006 Pontiac Grand Prix

1 Answer

The Ignition and autostart


Sound like a reversal of wires on the autostart. Should only cut out if you don't have the key in ignition and apply brake. Did you have this installed or was it in when you bought the vehicle?

May 28, 2009 | 1999 Jeep Grand Cherokee

1 Answer

1994 integra


Many autostart devices also have security systems incorperated, first I would try to arm and disarm the system then try to start again. Then check the autostart controll unit to see if there is a reset or fuse. If not a reset often times there is a disable for the autostart witch will allow you to diagnos the starting problem without the aftermarket device. If non of that helps post your next message with an update plus make and model # for the autostart.

Jan 18, 2009 | 1994 Acura Integra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...