Question about Jeep Grand Cherokee

1 Answer

2005 jeep grand cherokee 4.7 liter v8. when coming to a stop, the engine stalls. Problem is happening more often now. Had the Jeep in driveway today and was revving the engine and when I let off the gas it stalled. It will idle fine without stalling when it is started, only happens when you drive it or rev engine.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Check and clean the idle control solenoid and passages, check the throttle position sensor and perhaps the crank sensor. Don't buy anything without testing or you will be spending money on stuff you don't need.
If stumped, get a chiltons or haynes manual and go through the test procedures they outline. Any good shop does this and you should too!
If it tends to stall that tells me that the iac is possibly opening late (sticking) but that can also happen if it gets bad information from the control system. (where testing is important)

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 jeep grand cherokee stalls when i am coming to a stop. it starts right back up and runs normal.


change your crankshaft position sensor if it still does it then change your camshaft postion sensor

Mar 02, 2013 | 1995 Jeep Grand Cherokee

1 Answer

Need to know firing order for 93 v6 jeep cherokee


Nice SUV, Im owner '93 GC 5.2L V8 Magnum engine, so niceee!!!

1993 Jeep Grand Cherokee 2WD 4.0 liter L6 VIN "S"

d9de8af.gif

The next time, you need pay me 1 buck for each cyl. lol

TY for using Fixya (remember rated and comment this).

Sep 11, 2010 | 1993 Jeep Grand Cherokee

2 Answers

Jeep 4.0 firing order


1999 Jeep Cherokee 4WD 4.0 liter L6 VIN "S"

71cf96f.gif

Hope this helps (remember rated this).

Aug 09, 2010 | 1998 Jeep Cherokee

1 Answer

Location of coolant sensor for 97 Jeep Grand Cherokee v8


in the 5.2L V8 engine the coolant sensor is located on top of the engine. Locate the coolant thick hose coming from top of the ratiator to the top of the engine. Look at the place such hose connects to the engine you wont miss the sensor it is about one inch from there.

Jun 27, 2010 | 1997 Jeep Grand Cherokee

1 Answer

My 2005 Jeep Grand Cherokee 5.7L stalls while driving. This has happened so far only at low speeds; excelerating after stopping. I put it into park and turn the key and it starts back up just fine. It...


The problem I believe is the crank shaft position sensor.Check the wiring and make sure the connections are good.It is located at the right rear side of the engine block.Hope this helps.Good luck.

Feb 22, 2010 | 2005 Jeep Grand Cherokee

1 Answer

My 1997 jeep grand cherokee tsi 5.2 v8 stalls as you come to a stop


must perform a Throttle Body service making sure to clean A.I.S. motor and resetting sensor values

Nov 17, 2009 | 1997 Jeep Grand Cherokee

2 Answers

Replace a crankshaft position sensor on a 1996


1st I need to know what engine you have, 4.0L or 5.2L V8.

Oct 02, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1996 jeep grand cherokee 4 x 4 with 5.2 liter v8


under the vehicle...mounted close to the front of the fuel tank...be sure to release the fuel pressure before you disconnect any line..you can do that by removing the fuel pump relay and cranking the engine

Sep 27, 2008 | 1996 Jeep Grand Cherokee

1 Answer

Motor stalls out and wont idle


check for vacuum leaks if none replace the idle air control motor

Sep 26, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

681 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...