Question about 1992 Buick Roadmaster

Open Question

Need to replace front speakers 1992 buick roadmaster

Replace front speakers 1992 buick roadmaster how to remove front door panel

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: replace heater core on 1992

It appears I was incorrect about removing the dash assembly, here are the instructions from a Buick owners club.

Under the passenger dash is an access panel that will allow you to remove the heater core, it really isn't that hard, there are lots of little dash screws and panel screws to remove before you get where you need to be but at least it is roomy. The AC evaporator is located by the heater core. I will give you a tip. I changed mine last year and the heater core that I ordered for my 92 Roadmaster was not correct, when I took my old one out and matched it in a book at the local part store, the heater core for my vehicle was listed as a 96 Caprice???? The car has been in my family since it was purchased new and the heater core had never been changed!!!! Explain that one!Oh yeah, one more tip, if your heater core is leaking, this access panel lowers towards you, if there is nasty sweet smelling water in there it will pour all over you, be careful! Caprice parts are the same as a Roadmaster,so if you ever need anything just look up caprices

Posted on Dec 16, 2008

Ad
  • 1 Answer

SOURCE: Buick LeSabre left front window will not close

Don it. Good half day for amateur. Get Chilton 86-99 Bonneville, 88, Lesabre manuel.. Tricky to find bolts are under end flaps on door close handgrips. Took me a day to figure that one out. Others under light at lip of back of door. Book indicates to strart with window 3/4 up if you can. Flip up window control at rear of panel. After all screws are out raise outer edge of armrest and look for notches 4" and 11-1/2" from rear of armrest to slide inward to remove. There are screws under the door handle too. Screws everwhere. When pulling bottom of panel from door lift with a notched bar to avoid tearing the fasteners out of the cardboard panel. Two screws behind seatbelt notch at top need to come out to allow positioning the glass. The panel at the bottom of the top opening can be removed for more fredom in positioning the glass when reinserting the ball in the lower track on the window. Tape glass with duct tape to keep it from falling. Drill the factory rivets that hold the old regulator and I replaced with stove bolts with nylon locknuts slotted head to the inside the car. Can't remember the size, probably 1/4 or 3/16". Remove speaker if in front bottom of door to use your hand to do work in the door. You must twist the regulator forward with window 1/2 down to remove the ball from the socket in the bottom sliding metal track at the bottom of the window. Don't drop the window after removing the socket, tape it in place. Don't know what you do if you cannot move it to 1/2 up position. By the way, the body shops say you must use rivets, not screws or it will shift, but I have had no problems with the screws for reinstallation several years old. The rivet they use take a big hydraulic pop rivet gun that you won't have. Good luck, I don't envy you. Need to do other window on my 91. The window control may not be the same on the Custom, mine is the Ltd. you may be able to remove the motor from the regulator in the door without removing the regulator if you can figure out how to get the bolts that hold the moter to the regulator. inside the door.

Posted on Jan 02, 2009

  • 316 Answers

SOURCE: How do I remove the front door panel to replace the mirror

Normal 0 Disconnect your negative battery cable. Locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Remove the interior door handles, then disconnect the wire clips to the switches. Your panel is held in place by snap in clips; use a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are pulled, pull the panel upward to remove it from the door.
Install in reverse.

If you don't have power windows you will have to remove the manual window crank. It is held in place by a clip on the back side of the base. To remove the clip, you will need a small hook (kind of like a knitting needle). Put the hook in behind the base, and grab the clip and pull it off. To replace it, slide the clip back on the window crank, and snap it back on the door.

Posted on May 25, 2009

  • 1986 Answers

SOURCE: Front door speakers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 1986 Answers

SOURCE: remove door panel

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace vent window 1992 buick roadmaster


Remove window and side vent track.then you can remove vent glass

Aug 24, 2016 | 1992 Buick Roadmaster

1 Answer

Replace fuse dashboard 1992 buick roadmaster


press the helpful button and check links below, it is a 1993 manual, should be the same.
one fuse panel on that vehicle. It's on the driver side end of dash, you have to open the driver door to get at it. The box is under the hood, labeled relay center I believe. http://www.vadengmpp.com/owners-manual/buick/1993-Buick-RoadMaster.pdf

Buick Workshop Manuals

1992 Buick Roadmaster the tail lights nor dash lights work tried replacing...

Feb 03, 2016 | Buick Cars & Trucks

1 Answer

How to replace driver's side mirror 1995 Roadmaster


You have to take the door panel off , I'll send this youtube link. It isn't the same car but there all pretty much the same ! How To Install Replace Broken Damaged Mirror 1992 99 Buick Lesabre

Dec 23, 2014 | Buick Roadmaster Cars & Trucks

1 Answer

Where is the brain box located on the 1992 Buick roadmaster?


brain box is located on passenger side interior behind panel next to door, and under blower motor.

Mar 10, 2011 | 1992 Buick Roadmaster

1 Answer

1992 buick roadmaster. how do you replace the neutral safety switch


HI, IT IS UNDERNEATH THE AIR CLEANER ASSEMBLY ON TOP OF TRANSMISSION. SO REMOVE AIR CLEANER, REMOVE THE WIRE CONNECTOR,THE 2 OR 3 13MM BOLTS, 1 15MM NUT, AND LIFT OFF SHIFT CABLE, THEN REMOVE. INSTALL IN OPPOSITE ORDER. THANKS MOTOR62500.

Dec 21, 2010 | 1992 Buick Roadmaster

1 Answer

I need to know where the fuel pump shut off switch is located


if it helps ive only ever seen them in the trunk,near or behind the carpet on the sides. and up front inside the car behind kick panel trim (near front doors) give those places a shot and let me know what happens

Aug 25, 2010 | 1992 Buick Roadmaster

1 Answer

1992 Buick Roadmaster Limited- air conditioner blows hot air, does not need feon and compressor appears opperational. Any ideas


Make sure the large line going in the firewall is cold,if so,the problem is on the inside ,check the temp door,it is most likely not opening for cold temp.

Jun 04, 2010 | 1992 Buick Roadmaster

1 Answer

When I let the window down the window tilt toward the front


remove door panel and check window track for damage or loose where window has popped off track

Oct 13, 2009 | 1992 Buick Roadmaster

1 Answer

Change starter 192 buick roadmaster


dissconect battery, remove flywheel cover,remove 2 bolts holding starter, now drop starter and remove wiring and take out,

Sep 30, 2009 | 1992 Buick Roadmaster

2 Answers

Replace heater core on 1992 buick roadmaster


It appears I was incorrect about removing the dash assembly, here are the instructions from a Buick owners club.

Under the passenger dash is an access panel that will allow you to remove the heater core, it really isn't that hard, there are lots of little dash screws and panel screws to remove before you get where you need to be but at least it is roomy. The AC evaporator is located by the heater core. I will give you a tip. I changed mine last year and the heater core that I ordered for my 92 Roadmaster was not correct, when I took my old one out and matched it in a book at the local part store, the heater core for my vehicle was listed as a 96 Caprice???? The car has been in my family since it was purchased new and the heater core had never been changed!!!! Explain that one!Oh yeah, one more tip, if your heater core is leaking, this access panel lowers towards you, if there is nasty sweet smelling water in there it will pour all over you, be careful! Caprice parts are the same as a Roadmaster,so if you ever need anything just look up caprices

Dec 16, 2008 | Buick Roadmaster Cars & Trucks

Not finding what you are looking for?
1992 Buick Roadmaster Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...