Question about 2005 Nissan Quest

1 Answer

Vdc light and brake lights comes ON.

The vdc light and brake lights comes ON in my 2008 Nissan Quest. How can I turn it off?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Does the master cylinder have enough brake fluid in it, low fluid level commonly causes those two lights to come on you may wanna check your brake fluid level.

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the ABS/VDC/AWD lights off on my 2008 Nissan Rouge not that I have replaced my left ABS Wheel speed sensor?


try this --when you start the car fist keep your foot on the brake pedal keep it on then turn the key on --if no warning lights its your brake light switch

Dec 20, 2016 | 2008 Nissan Rogue

2 Answers

2004 Nissan quest vdc off battery and brake lights all on and no power


You need t have the system scanned for fault codes. This is the first step to understanding what the problem is.

Jun 30, 2016 | Nissan Cars & Trucks

1 Answer

What does Brake light,VDC light and slip lights on . This happened when brake pedal pulsates,but I do have brake pedal.


See if the following information helpful:
1. Keep an eye on the dashboard for the indicators marked "SLIP" and "VDC Off" which will tell you the status of the computerized handling system if handling isn't normal. "SLIP" will blink when VDC is operating. "VDC OFF" means the system is off. Turn the VDC system back on if the Nissan's handling is poor by pressing the "VDC Off" button until the light goes out.

2. Adjust your driving if "SLIP" comes on. "SLIP" means the road conditions may be slippery. The VDC aids in steering and stopping, but be careful, even if VDC is engaged.

3. Remove any aftermarket suspension parts like enhanced shock absorbers if the "VDC Off" light comes on and handling is bad. The VDC system is geared for stock equipment and tires only. Use winter tires or snow chains on snow-covered roads. VDC won't substitute for the correct winter equipment.

4. Don't drive on very inclined corners with high banks and leave the VDC switch on if the handling is poor with VDC on. The system can't operate properly in that environment. Disengage VDC, or avoid those kinds of roads.

May 21, 2014 | 2004 Nissan Titan

1 Answer

2008 Nissan Quest Reverse Park aid stoped working. First sound got funny and then quit. The switch disable light stays on and won't turn back on


replace the beeper that makes the sound when you are in reverse.the light will also go out after you replace thet beeper.

Sep 16, 2012 | 2008 Nissan Quest

1 Answer

VDC system comes on and vechicle shuts off and hard to restart, then only goes slow...what causes this to acctivate itself on dry roads?


those lights will come on if the battery is low, or even if you're on an incline and the sensor reads low brake fluid. Thats the most simple check. Look at the brake fluid reservoir.

Dec 10, 2011 | 2004 Nissan Quest

2 Answers

Abs,vdc,slip light comes frequently on when driving, on my Quest 2004 ...... don't you have any idea about this problem that come with any weather or temperature many thanks in advance kind regards


frist look at the brake fluid levelk and make sur eit is right. second is do you have all the same tires are the right tire soize on the quest and thrid is it could be an ABS probem. see if you can get Autzone to pull codes for free and bring them back to me so I can help you go further.

Jul 11, 2011 | 2004 Nissan Quest

1 Answer

2006 Nissan Pathfinder - VDC and Slip lights come on if you push the brake all the way down (after stoping). Brakes on pathfinders a "spongy" anyway and offer variable resistance depending on...


While it is possible the brake cylinder needs replacing
I would be suspect of what a dealer tells you

If your bold enough to walk into the dealer service
bay from outside and talk to the tech that worked on
it,that would be where to start.

The VDC etc should be diagnosed with the proper
test equipment,scan tool etc.

I would talk to the tech,then go to a local repair
shop and spend some time explaining all the
issues,& make it clear your there only to work on
the Braking Electronics,no other checks or service
of any kind.

Apr 25, 2011 | 2008 Nissan Pathfinder

1 Answer

No solution yet


VDC/ OFF light is still ON only ? or also SLIP + VDC/OFF ?

if VDC/OFF only u must check ur brake fluid status if both VDC and SLIP u still have problems with ur ABS module and steering wheel


Jun 15, 2009 | 2008 Nissan Xterra

Not finding what you are looking for?
2005 Nissan Quest Logo

Related Topics:

905 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...