Question about 1996 Chevrolet Blazer

1 Answer

I need to know the location of the reicver for the keyless entry.2000 s10 blazer

Posted by on

  • kmonsey May 11, 2010

    under trim panel top of parking brake

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

By parking brake

Posted on Oct 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Looking for the relay or fuse for a remote keyless entry devise for 2000 Alero


The fuse if its open is located in the left side of the instrument panel juction fuse box it is a 10 amp fuse listed as Trunk Rel,Rfa,

Aug 16, 2012 | 2000 Oldsmobile Alero

1 Answer

Lost keyless entry code


Keyless entry code was on a small strip attached to the left trunk hinge in my 94 T-Bird. It wasn't anything fancy just a 1/4x2" strip with 5 numbers on it Your owners manual should give you the location, but mine was kind of vague like drivers side of trunk.I hope this helps

Feb 03, 2010 | 2000 Ford Crown Victoria

1 Answer

The door locks on my F250 work intermittently when using the keyless entry fob.Many times I must manually lock the door after locking with the fob. Do you have some idea what is the prob?


I had this problem on my exploder. From what I remember I located the keyless entry receiver underneath the drivers side dashboard there should be a box with the name SIEMENS on it. This is your keyless entry receiver. Unplug the unit for about 1 hour ( do not know why for an hour ) and plug back in after 1 hour. Should work fine after that.

Jan 28, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Power locks and power mirrors dont work from the controls on the inside of the cab checked the all fuses all were good. the keyless entry remote locks the vehicle from outside but lock switch on both...


I am currently having the same problem with my 2004 Blazer, after a little research I am going to try replacing the engine compartment fuse *** suggested. I will let you know if tis works.

Dec 24, 2009 | 2000 Chevrolet Blazer

1 Answer

95 S10 blazer 4dr power door locks inop, new battery installed in remote, all fuses good, still inop?


1. Locate the red two wired programming connector located near the central locking control module that is located behind LH Lower instrument panel. Drop the panel and you will see the red programming connector that is not connected to anything.
2. Inside the Red programming connector you will see to pins..
Jump two pins with a section of wire.
3. System should now lock and unlock doors to indicate vehicle has entered programming mode.
4. Press any button on keyless remote once. System should now lock and unlock doors indicating the keyless remote has been programmed.
5. Repeat step 4 to program other remote.
6. Remove jumper wire from programming connector to exit programming mode.
7. Test Remote(s)

Dec 22, 2009 | 1995 Chevrolet Blazer

1 Answer

Reprogram keyless entry


It took me a few attempts to program a new keyless remote for my 2002 Chevy Blazer.
Insert key into ignition but don' turn it yet. While holding down the UNLOCK switch on the door, the trick is to cycle the ignition ON OFF ON OFF as quickly as possible then release the UNLOCK switch. If done correctly the door locks will cycle 1x to acknowledge. Then hold both the unlock and lock buttons down on the remote for about 15 seconds. The locks should cycle again to confirm...Hope this helps.

Mar 19, 2009 | 2002 Chevrolet Blazer

1 Answer

Keyless entry code


They normally stamp the Keyless entry code in the trunk and if not I belive the Computer that controls this is located behind the Glove box and they normally have the code printed on it.

Jan 11, 2009 | 1987 Lincoln Mark VII

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...