Question about 2001 Pontiac Sunfire

1 Answer

High-beams and day lights not working...changed

Pontiac 2001 sunfire....high-beams and day lights not working...changed the relay and the bulb..still not working? lights flash a few times then go out???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

You have a problem with corroded wires in your wiring harnes most probably around the battery tray very very common problem .You will have to peel back the tape and look for any signs of corrosion pay attention to the pink wire

Posted on Oct 14, 2009

Testimonial: "Thank you so much Donny...that is exactly what the problem was. We replace that wire, and all is working great! Thanks again! :o)"

  • Donny Scotland Nov 05, 2009

    HI Cindy no problem glad to help and save you some cash.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My daytime running lights work, high beams will come on but switch wont stay on, have to hold it. Low beams do not work and daytime running light dash indicator stays on all the time. Is it a relay or...


if you have to hold the switch so the high beams stay on then that indicates a bad/worn switch,you could have 2 problems the day time running light relay may have a problem with it.i would first replace the headlight switch at the base of the steering colume as by the info you supply its not changing to the high beam side without holding the switch in position.

May 25, 2011 | 1998 Pontiac Sunfire

1 Answer

Front light bulbs are new. all fuses are good,i change the relay for front lights.. hight beams working good... but the lower beams dont work.. what i should do?


Check for the blue wire in the harnessacrossthe front in front of the rad it will be a broken wire near the drivers headlight the blue is for low beam tje high beam is pink there is also two splices just under the drivers headlamp check for green corosion

Apr 20, 2011 | 2001 Pontiac Sunfire

2 Answers

Ok I have seen tons of posts about this issue with the Pontiac Sunfire, but no clear solution. I have a 2001 Sunfire the yesterday the Day Running Lights quit working. My passenger side head light will...


First check the R/S headlight fuse in the dash fuse panel (left side), second make sure the R/S low beam headlight bulb filament isn't blown, both these scenarios will do what you are saying. The DRL's work when both low beam lights are in series, thus only 6v going to each bulb at reduced brilliance. The high beam is a totally separate circuit controlled by the multifunction switch. The DRL relay is controlled by the Body Control Module, grounded there, and it will also illuminate the service vehicle soon light. It could also be a bad ground at G204. Its on the steering column support bracket.

Apr 08, 2011 | 2001 Pontiac Sunfire

1 Answer

My 2004 pontiac sunfires headlights malfunction


have your mechanic check the daytime running light relay and control module as failure is common.

Dec 26, 2009 | 2000 Pontiac Sunfire

2 Answers

Drl and high beams dont work


Check the bulbs -- the daytime running lamps use the highbeams on the resistor -- There are two filliments per bulb one high; one low. If both high beam filliments are out nothing will work....replace bulbs if this is the case.

Aug 02, 2009 | 1999 Pontiac Sunfire

1 Answer

Drl not working nor are low beams high beams work properly


Ok look under the bagtterry tray, there is a black box bolted to the body, it is the headlight ground and has a really bad tendency to corode due to the design.

Feb 01, 2009 | 2001 Pontiac Sunfire

Not finding what you are looking for?
2001 Pontiac Sunfire Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...