Question about 1996 Plymouth Voyager

1 Answer

Timing belt 3.0 plymouth - 1996 Plymouth Voyager

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Plymouth Master
  • 1,757 Answers

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need.
Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Posted on Mar 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1991 sun dance dies in middle of road will not start. The check engine light blinks 2 short 3 quick. Could this be a timing belt?

Your timing belt could be broken or perhaps the Drive chain that drives the two balance shafts behind the timing belt

Dec 15, 2012 | 1991 Plymouth Sundance

1 Answer

I have a 1996 Plymouth Voyager vin #2P4FP2530TR740836 # 3 liter needs timing belt I am getting mixed messages some people say I need a new engine some people say it will be fine what is the true answer?

I have the same van as you and if it is njust the timing belt that is a very easy job to do considering the belt runs around a duel overhead cam the cover is at the top of the motor on the left hand side ( no you dont need a new motor ) i just did the timing on ours again very easy to do if you know the motors i would phone around and see what mechanics will charg to do a timming belt

Good luck!

let me know how things turn out

Sep 13, 2011 | 1996 Plymouth Voyager

1 Answer

1991 plymouth voyger where is the belt tension? It has 3 belts. How can i get it loosen belts?

Sorry, each belt on this model has an individual adjustment bracket...Good news if you have the owners manual...The manual shows the location of each adjustment setting needed to remove, or replace each of the 3 belts...newer models have a single serpentine belt with a tensioner pulley for quick release or replacement...:)

Dec 10, 2010 | Plymouth Voyager Cars & Trucks

1 Answer

How do i reset the timing belt on a plymouth neon 2000...i have placed the timing belt on the car but i do not know how to set the timing belt back....

CLICK on the following LINK. It has the Timing Belt/Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at!

Feb 28, 2010 | 2000 Plymouth Neon

1 Answer

Timing belt broke and jump timing how do i get

If you have the harmonic balancer still attached you can align the timing marks with 0 degree to get the main block aligned. With the head removed you can turn the cam shaft till the number 1 valves are both closed and the number 3 exhaust valve is open. Take the time to inspect the valves as well. This vehicle did not come with no contact valves so when the belt broke it is possible the valves made contact with a piston and bent. I highly recommend you get the Haynes Repair manual on this vehicle from the local auto parts store as it has detailed instructions on how to get back to TDC if this happens. It also has Pictures on this. Because this belt goes around 3 timing marks aligning those after you have the pistons at TDC if you align the timing marks on the different sprockets/pullies the timing for teh valves will be correct.

Jan 25, 2010 | 2000 Plymouth Voyager

2 Answers

How do i replace the timing belt on my '94 Plymouth acclaim?

I did it twice and if you are fairly skilled it will take 4-6 hours, if you have the V6.
Here is the steps:
1. Move car to a place that can support a jack and engine stand.
2. Disconnect battery
3. Loosen wheel lugs on passenger side front tire
4. Jack car on passenger side to lift wheel of the ground
5. Put a block under the oil pan to support the engine
6. Block car frame on left side
7. Remove left front tire
8. Remove v-belt
9. Remove idler pulley
10. Remove and support air conditioner compressor
11. Remove PS pump if you have one
12. Remove motor mount on left side and vacuum / gas connections connected to mount ( mark bolts as to locations )
13. Remove metal plate on engine ( mark bolts as before )
Tricky bolts are on the PS pump (Remove them through PS pulley holes)
14. Remove 3 plastic covers over timing belt ( mark bolts as before )
15. Note timing marks on overhead cams and crank.If none, make some.
16. Ease pressure off timing belt tensioner
17. Remove belt and replace with new. Trick here is to make sure you get the belt notches lined up. Head cams will shift when you remove the old belt. Do not tighten the belt tensioner fully or it will not perform as designed, it should be snug but be able to move.
END... replace part is backward order and drive away !!!

Nov 16, 2009 | 1994 Plymouth Acclaim

2 Answers

1997 plymouth grand voyager v6 3.0L broken timing belt

I had the same thing happen, No, I was told this is not one of the engines that allows the piston to contact the valves. I replaced the timing belt 2 years ago and had no valve problems.

Sep 22, 2009 | 1997 Plymouth Grand Voyager

1 Answer

Timing a 1992 plymouth laser 1.8L

set it to top dead center and clock cam gear. align timing belt and release tentionor i belive. if u replaced the belt recently then it shouldnt need replacing for awhile.

Apr 13, 2009 | 1992 Plymouth Laser

Not finding what you are looking for?
1996 Plymouth Voyager Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides