Question about 2005 Pontiac G6

1 Answer

Remote start function on remote doesn't work for a 2005 Pontiac G6.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 691 Answers

Replace battery first and see if that help, if not then follow steps below, if you cant figure it out or it still doesn't work, or take it to the dealer, it could be remote module is faulty. Keep the windows open as a safety measure, then,

Remove the ignition key from the ignition lock cylinder.

Remove the BCM PRGRM fuse from the fuse panel. Refer to Fuse Block in Wiring Systems.

Close all of the doors.

Close the liftgate.

Turn the ignition lock cylinder to ACC.

Turn the ignition lock cylinder to OFF, & then back to ACC within 1 second.

Open & close any vehicle door. A chime will be heard when the system enters the BCM programming/diagnostic mode.

Important
After 7 seconds, a chime may be heard confirming successful synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.


Press & hold the transmitter LOCK & UNLOCK buttons simultaneously for 14 seconds.

Repeat the previous step on each additional transmitter to be programmed.

Remove the ignition key from the ignition lock cylinder.

Install the BCM PRGRM fuse back into the fuse panel. Refer to Fuse Block in Wiring Systems.

Posted on Oct 07, 2009

  • jkb399 Feb 12, 2011

    it's the gas cap

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 G6 remote . lock won't work but unlock does. Does not seem to be battery. Maybe the connection inside ?


Knowing the poor quality of this remote I would buy another remote on eBay and that will likely solve the problem. Here is a link to an eBay auction. Just $17.99 and free shipping.

Oct 10, 2012 | 2005 Pontiac G6

1 Answer

2005 pontiac G6 starter won't work. New battery


Are you talking about the car battery? or the remote battery?

Aug 14, 2011 | 2005 Pontiac G6

1 Answer

Remote starter not working but unlock does Pontiac G6 2007


might be gas cap, had same problem. when the gas cap was not on tight the car would not remote start

Feb 05, 2011 | 2005 Pontiac G6

1 Answer

I have a 2008 Pontiac G6 and it came with a remote keyless entry and remote start and the remote start is no longer working. When I try to start it the lights flash and the dash lights come on but it does...


I think that the module for the remote start is bad, possibly the connection to the starter circuit is bad.

I would take the vehicle to an auto electric service shop in your area that installs remote starters to diagnose and repair the problem.

Oct 13, 2010 | 2005 Pontiac G6

1 Answer

Remote on 2005 g6 work some times and sometimes not,where do i check


The first step would be to replace the battery in the remote, if you haven't already. Usually, you pry them open with a screwdriver or a dime.
Does the other remote work OK?

Jun 12, 2010 | 2005 Pontiac G6

3 Answers

Remote start not working


did you install a new battery in the remote this can can send false alarms in the remote

Sep 24, 2009 | 2005 Pontiac G6

2 Answers

Remote start


first make sure you have the keyless start entry setup. if u do then you need to lock the door with the transmitter after you lock the door press the start button and hold it down until it starts. It usually takes three or four seconds.

Mar 16, 2009 | 2005 Pontiac G6

1 Answer

My remote for my pontiac g6 does not work


You can replace the battery, but as far as the remote, if it is a factory installed remote, you have to go to the dealer.

Jan 15, 2009 | 2005 Pontiac G6

1 Answer

Remote start will not let car start


The remote start won't keep the car from starting.

If you have a check engine light on currently, that will not allow the remote start to function at all.

Jan 09, 2009 | 2006 Pontiac G6

Not finding what you are looking for?
2005 Pontiac G6 Logo

787 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...