Question about 1995 Suzuki Swift

1 Answer

I need the dimentions for a 95 swift rim... the inside diameter hole i already know it is a 13in 4x4.5

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 102 Answers

You've just about stated all the numbers that you can ever possibly need! Yes, the standard 13" wheel is 4.5" wide, has 4 stud holes intended for 12mm studs which are on a pitch circle diameter (PCD) of 114.3mm (the Japanese version of 4.5"). The only thing you haven't mentioned is the offset of the rim. This is the distance from the mounting hub face of the wheel to where the middle of the wheel is (halfway between the outer and inner rim edges. For a front wheel drive car, this number is usually always positive and I think it is 35 or 45mm for this wheel. If you have an original steel wheel, it should be stamped on the outer rim area near the valve (along with other identifying info).

Posted on Oct 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are tire rims from other model cars interchangeable with a buick verano?


rims are made by manufacturers to vehicle manufacturers specifications
Those specifications include rim off set , pitch circle diameter for stud holes , flat or tapered holes for studs, clearance for brake callipers
When considering what you ask , you have to be very careful of those specifications or rim, bearing failure and brake interference can result

Apr 06, 2018 | Buick Cars & Trucks

1 Answer

Can I buy non vw winter rims for a 2018 alltrack ...


GO TO A GOOD RIM AND TYRE SPECIALIST.
There are set measurements when rims are fitted. As long as these match you can fit any make of rim.
Take your car details they will be able to suggest rims that will fit.
If you don't, things get complicated.
You will need to check the following.
-Number of wheel bolts/nuts. (4 or 5).
-wheel bolt/nut spacing. (Distance between opposite holes).
-Rim diameter.
-Rim width.
-Rim offset. (How far the rim sticks out of the wheel arch.
-Rim edge type.
-Tyre size.

Feb 11, 2018 | Cars & Trucks

1 Answer

Can I do this? WHEEL SWAP 2005 COLORADO


try putting one wheel of what you want to do on a hub to see if it fits
check for stud pattern and that the studs fit in the center of each hole
next measure the distance from the rim edge ( use a straight edge across the diameter and measure from that edge to the stud holes are ( measuring rim off set)
if both wheels measure the same then they should fit
go to a tire dealer and get the details of each rim to see if it can be done
the major items to be aware of are the stud pattern is the same pitch circle diameter ( bolts in the same circle ) and the center off set of the rim

Feb 07, 2016 | Chevrolet Cars & Trucks

1 Answer

How to get the rear brake drum off a suzuki swift 2002


Make sure emergency brake is release.
If it still. There should be two hole about 3/16" to 1/4" diameter
on the drom surface. Use two 3" long bolt make sure it fit the hole's tread then screw in both hole enenly. It'll bring the drum out.
Or there is not hole. Then use rubber mullet (Rubber hammer) hit from the inside edge evenly (Or top/bottom). It should be able to come out.


Mai Lor

Feb 28, 2013 | Cars & Trucks

1 Answer

Where can I buy mags for 2004 honda civic?


Just google them. However get the specs on your present
rims, diameter, width, lug hole placement, etc. Usually
the mag mfg. or provider will know what mag rims fit your
car when you order.

Jan 13, 2011 | 2004 Honda Accord

2 Answers

Unable to remove tire to change it even after removing all lug nuts ... is there some type of locking mechanism?


GIVE SIDE WALLS QUICK SWIFT KICK.DONT BREAK YOUR FOOT OR USE A LARGE RUBBER BLOW HAMMER HIT SIDE WALL SHOULD COME OFF.MAKE SURE VECHICLE IS OFF THE GROUND ENOUGH WHERE BOTTOM PART OF TIRE STILL DONT HAVE SOME VECHICLE WEIGHT STILL ON IT.

Oct 20, 2010 | 1995 Dodge Intrepid

1 Answer

I have a vw polo on an R registration, I took off the 15in alloy wheels, and tried to replace them with 13in steel rims, but the front 2 will not fit on because of the brake caliper, do i need deeper 13in...


i take it that your "r"reg car is U,K.spec.if it is, then by changing the wheels to 13 if fitted with 15 as std YOU WILL invalidate your insurance.

Oct 04, 2010 | 1996 Volkswagen Jetta

1 Answer

Hi. I have a mazda bongo. I want to know if I can fit 16'' rims from a mazda323FZxi on my bongo. The seller gives the following info about the rims. Aspect ratio-50. Offset-40. Stud diameter-114. Rim...


Hi! It may fit, but the question is.. does it have the same stud holes. THey may not much so please check if the studs will fit. Hope this helps and have a good one!

Jul 01, 2010 | 1991 Mazda 323

1 Answer

I have a suzuki swift 95 now the seat belt light


When you buckle the belt it will push a button inside the latch.
you need to replace the latch and it should go to working.

Jun 23, 2009 | 1991 Honda Accord

2 Answers

Wheel size


My Clio has 15 inch rims and takes a 185/55 R15 tyre. I don't know if all the models are the same. If you are replacing the rims be careful your new rims have the same number of stud holes (mine is 4) and the same pitch circle diameter (PCD) (mine is 100 mm I think).

Oct 10, 2008 | 1986 Renault Sport

Not finding what you are looking for?
1995 Suzuki Swift Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

80668 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...