Question about 2002 Dodge Intrepid

1 Answer

How to fix a head gasket for 02 dodge intrepid

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,921 Answers

Do you mean replace the head gasket -- you can't fix them, you have to put in a new one. That requires removing the cylinder head(s), which requires removing the intake plenum, disconnecting the exhaust manifolds, and on the DOHC 2.7L engine, removing the timing chain -- a major undertaking. If you're asking how to do this, you probably should have a professional mechanic do it. It's not a simple job.

Posted on Oct 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 dodge intrepid I keep having coolant leaks.i fix one leak and I get another... new overflow tank, first...then bleeder valve cracks...fixed... then radiator...fixed..now im leaking fluid from bottom of...


You may have a blown head gasket thatis pressurizing the coolant system-pull radiator cap off and put a pressure gauge on it and see if pressure goes above 17.5lbs-cheers Denny

Oct 09, 2013 | 2002 Dodge Intrepid

1 Answer

Have a Dodge Intrepid 1997 3.3. Can oil passage to rocker shaft be unplugged without removing head


probably not as the only thing causing the blockage apart from foreign matter is an incorrect head gasket or a gasket that has been fitted incorrectly that is blocking up the oil hole.

Sep 23, 2013 | 1997 Dodge Intrepid

1 Answer

01 dodge intrepid blowin white smoke


if its white smoke and its not due to a drop in outside air temp then this indicates that the motor is burning engine coolant,,which could be caused by a bad head gasket,cracked head,leaking intake gasket.have a block test done to see if there is combustion gases in the coolant.

Nov 09, 2011 | 2001 Dodge Intrepid

1 Answer

I have the starting of a blown head gasket on a 2000 dodge intrepid. I was wondering does the steel seal stuff that is advertised really work? would really like to know before spending my hard earned...


It all depends on where the leak is and how bad. It could work but it also could not. Either way this would be almost a 100% temporary fix. I would either get it fixed right away or trade/sell the car. A head gasket replacement as long as the heads are good would run 800-1000$ at a reputable shop.'
Thank you,
Lee

May 22, 2011 | 2000 Dodge Intrepid

2 Answers

My 97 intrepid is idle to hight


I'm guessing this Intrepid is a 3.5 cause I have never had this problem with a 3.3 But what I found what always caused it in a 3.5 is bad intake gaskets allowing more air to flow into the engine. Change both upper and lower intake gaskets and this should fix the problem. However when changing the lower intake gaskets there are two bolts that are probably gonna give you problems. The one closest to the front and the one closest to the back. They are the bolts that hold the intake down and go into the head near the coolant ports. These bolts are probably going to break off. The good news is they most of the time break off and there is still a lot of bolt left once you get the intake off to get a vice grips on. Have a torch with a good heating tip handy and someone that really knows how to use it and heat the cyl head around the bolt and then try to get it out with the vice grips, but be very careful cause heating aluminium can be very tricky too much heat and you ruined the head.

Feb 25, 2010 | 1997 Dodge Intrepid

1 Answer

2000 r/t intrepid running hot new radiator thermostate and water pump


Sorry you have a blowing head gasket I have a Grand Am with the same problems and found out is was the head gasket. Get the car to the shop and have them perform a pressure test on the radiator and they can tell you if you have a blow head gasket failure also call intake gasket.

Aug 21, 2009 | 1997 Dodge Intrepid

1 Answer

Replace a head gasket for a 2002 intrepid


go to the parts store and get a chiltons or a haynes manual

Aug 13, 2009 | 2002 Dodge Intrepid

1 Answer

Radiator fan not turning on 02 intrepid


maybe the sensor that turns on the fans might of gone bad . . and turning on the ac when engine is gettin hot is not going to help instead turn on the heater to reduce the heat , also overheating causes hoses and gaskets to get soft and get destroyed

May 27, 2009 | 2002 Dodge Intrepid

Not finding what you are looking for?
2002 Dodge Intrepid Logo

1,068 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...