Question about 1997 Chevrolet Cavalier

2 Answers

Keeps blowing fuse to pump when key is turned on

Keeps blowing fuse to pump when key is turned on

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

I assume you mean Fuel pump. If this is the case you have a short in one of the wires going back to the fuel pump. Check the wires you can see, if you find no shorts or breaks replace the fuel pump.

Posted on Oct 07, 2009

Testimonial: "you nailed it a lil tape and fixxed thanks 10 million"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 986 Answers

Your fuel pump is shorted, and needs replaced

Posted on Oct 07, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1114 Answers

SOURCE: 1997 DODGE STRATUS 2.4 PCM FUSE BLOWS

Do you have engine check light on? if so scan it with OBD 2 tool and you should have a fault code! to go on!

Posted on Dec 22, 2008

shaggyrat
  • 1224 Answers

SOURCE: E.E.C fuse keeps blowing in 1991 Ford Explorer

if you replaced fuel pump i would look at backward wiring when replaced and i would start at the source of work if your vehicle was working fine before replacement then 9 out of 10 it will be your fuel pump wireing

sometimes when putting wireing back together the connectors have the missing clip and in turn you can turn the wireing in both directions now where positive is touching the ground on both sides of connector kris kross problem check your work this is crucial use a test light to find the right wires where they go

Posted on May 26, 2008

  • 1 Answer

SOURCE: My 2002 Sebring keeps blowing the starter fuse?

Mine is doing the same thing. We are getting ready to replace the starter. Hopefully that is the problem. I'll let you know how it turns out.

Posted on Mar 03, 2010

  • 395 Answers

SOURCE: Fuel pump relay keeps going bad

bad ground to fuse box

Posted on May 20, 2010

  • 5 Answers

SOURCE: fuel pump fuse keeps blowing

bad earth pal buy sound off it

Posted on Jul 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Keep blowing Fuel pump fuse 95 Buick Park Avenue


You may have a short in wiring to fuel pump. Try this! remove the wires from fuel pump, then turn key to start the car briefly. If the fuse does not blow, its likely the fuel pump is drawing to much current and blowing the fuse. God-Bless!

Oct 12, 2016 | Buick Cars & Trucks

1 Answer

My 2000 LeSabre keeps blowing fuel pump fuse when i start car


From what you have described it would be a short in the fuse pump circuit. You sould start checking your ground wires.

Jan 10, 2013 | 2001 Buick LeSabre

1 Answer

I have a 1995 ford mustang that keeps blowing the maxi fuse #11 as soon as i turn the key over the pump kicks on then instantly blows the fuse


I would pull the fuel pump relay and check the circuits for shorts to ground. It could be the pump or something else.

Dec 22, 2012 | Cars & Trucks

1 Answer

1997 GMC Sierra, I keep blowing the ECM 1 fuse, I replaced Fuel Pump relay and Fuel Filter. Does the ECM 1 Fuse Pump the Fuel Pump, also disconnected the Fiter turned on the key and no fuel.


ecm1 is injectors not fuel pump ecm-b is fuel pump its more likely to be a faulty relay for the injectors, it would be a similiar design to this
12900_oil_sending_unit_and_fuel_pump_circuit_80-yoo05im5qhid2i2poe1uh03c-5-0.gif this is for the fuel system, relay for the injector is nearly the same.

Nov 03, 2012 | 1995 GMC Sierra C1500

1 Answer

Why does my efi fuse keeps popping 1999 chevy prizm


Pull the EFI relay, replace the fuse, and see if it blows when you turn the key on. If it does not turn the key off, reinstall the EFI relay and remove the circuit opening relay/fuel pump relay. Turn the key on. If the fuse blows than we know the problem is One of the O2 sensors, the IAC, the purge solenoid, or the ECM You can unplug the O2 sensors, iac, and purge solenoid. Replace the fuse, turn the key on, and plug them in one at a time until the fuse blows. Replace that component. If the fuse blows with those unplugged than its probaly the wiring and possibly the ECM. let me know what you find and I'll help you more if needed.

Aug 05, 2012 | 1999 Chevrolet Prizm

1 Answer

1987 Chevy silverado gauge / idle fuse keeps blowing


The 20amp ga/idle fuse powers a hot fuel module which powers the oil pressure switch, the fuel pump relay, and the fuel gauge in the tank.
Any of the four components including the fuel pump can blow the fuse.

Jul 23, 2012 | Chevrolet Cars & Trucks

2 Answers

20 amp fuse keeps blowing engine won't start, fuse


I am a mechanic,i had that same problem where my engine 20amp fuse were blowing....i fixed it...problem were a broken wire in the harnace on the side of the cylinder head....i made over $200 on that job...yahhh

Aug 01, 2011 | 2001 Mitsubishi Galant

2 Answers

Fuel ECU fuse keeps blowing (30 amp)


Your fuel pump is internally binding and causing the fuse to blow. Change the pump (and filter while you're back there.)

Jun 14, 2009 | 1993 Jeep Wrangler

1 Answer

ECM BATT fuse keeps blowing


That fuse provides power for the fuel pump. Either your fuel pump is blowing the fuse or there is a shorted wire.

Nov 22, 2008 | 1995 GMC Jimmy

Not finding what you are looking for?
1997 Chevrolet Cavalier Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...