Question about 2002 Dodge Intrepid

1 Answer

How do I disconnect my engine light on my 2002 Dodge Intrepid? I know why it is is a filter that needs replacement for emmisions..I will fix it but in the meantime the light drives me crazy

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 543 Answers

You can not disconnect it ,its internal to the cluster,,,it could be many many thing wrong why the light is one,,,just fix the car, or live with the light or put black electrical tape over it :)

Posted on Oct 07, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2002 dodge intrepid check engine light on constant and car hesitates upon acceleration. What might be cause and cost to fix?

You must get the car scanned so you know why the light is on. Autozone will do this for free !

Nov 16, 2010 | 2002 Dodge Intrepid

1 Answer

How do i reset the computers on a 2002 Dodge Intrepid se 3.5L

Try disconnecting and reconnecting the battery cable usually works for issues like if your check engine light is stuck on.

May 14, 2010 | 2002 Dodge Intrepid

2 Answers

Where is the fuel filter on 2002 Dodge Intrepid? 2.7L engine

The answer is there isn't a fuel filter on a Dodge Intrepid. The 'filter' is the sock that covers the fuel pickup, and if needs to be changed it will require dropping the fuel tank.

Jan 26, 2010 | 2002 Dodge Intrepid

1 Answer

What is codes P016 Po441 P0135 2002 intrepid

016 is crankshaft position sensor. This needs to be diagnosed properly. Alot of times this part is replaced when an underlying condition is really the cause.
441 is an evaporative emmisions leak or a faulty purge or vent solenoid This vehicle also may have an vapor management valve so diagnosing is best so you dont replace the wrong parts when maybe the whole problem was a bad fuel cap or a vacuum leak somewhere.
And the 0135 is the 02 sensor heater circuit. This usually points to a faulty sensor and if so both upstream sensors will need replacing soon.
Now with all those codes I wonder if they happen all at once. There should be no way thier related but if they all happen at once I would start by removing the battery terminals and cleaning. And any grounds on the engine or body under the hood, clean them also. Most likely this isnt your issue but its the one thing you can do for free that might help. Then get the codes cleared. Disconnecting the battery may erase the codes.. If the codes come back you will need to get them addressed.

Nov 05, 2009 | 2002 Dodge Intrepid

1 Answer

2002 dodge intrepid se 2.7 engine light on got

Anytime a Chrysler product of this year has a check engine light, get it to a dealer immediately. The 2.7 liter engine is notorious for oil sludging. This can be a dangerous problem that can destroy the engine.

Your problem may have nothing to do with oil sludging, and I hope it doesn't; but don't take a chance.

Google "Chrysler engine oil sludging."

Oct 20, 2009 | 2002 Dodge Intrepid

1 Answer

2002 dodge intrepid P0352 error code.

Look for an erroneous connection or a damaged terminal at the #2 ignition coil. To locate the #2 ignition coil look at diagram below.

1 - 3 - 5
< - - - Front of vehicle
2 - 4 - 6

If connection is good next you need to check for a short in the wires between the ignition coil and the PCM.

If there is no short next you need to turn the ignition switch to LOCK.
Disconnect the PCM.
Check the ignition control circuit for a short to ground
Inspect the ignition control circuit for a short to battery voltage

See whether there is any open in the ignition control.

If everything is good next step would be to replace the PCM.

Apr 16, 2009 | 2002 Dodge Intrepid

1 Answer

I have a 2002 Dodge Intrepid ES 3.5L and on the way home this evening my engine light came on with a 440 code. I replaced the gas cap and just replaced the crank shaft sensor 5 days ago. The engine light...

try to disconnect the neg and pos charge to the battery almost every newer car has a computer in it it may be that the computer just needs to be reset

Mar 12, 2009 | 2002 Dodge Intrepid

2 Answers

Dodge intrepid 2002

The knock sensor is threaded into the block of the engine, just below where the cylinder head sits. You will need to remove the intake plenum (upper and lower) to access this part.

Feb 03, 2009 | 2002 Dodge Intrepid

2 Answers

Trouble starting my 2002 Dodge Intrepid

it could be a number of things. i'd go with the easiest fix first. check your air filter, then check spark plugs, then fuel filter. replace as necesary. good luck

Jan 04, 2009 | 2002 Dodge Intrepid

Not finding what you are looking for?
2002 Dodge Intrepid Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides