Question about 1999 Chrysler Concorde

1 Answer

Replacing high beam headlights - 1999 Chrysler Concorde

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 5,763 Answers

Unscrew lock ring and wiggle lamp out of back.

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

Toyota camry 2002 fuse box diagram


It is very common for both headlights to be bad, as we use our low beams a lot more than high beams. I would first suggest replacing the headlight bulb. The low beam filaments could be bad and the high beams be ok. If this doesn't help feel free to let me know and I will be happy to look a little deeper for you.

Sep 12, 2013 | Cars & Trucks

1 Answer

2006 volkswagon beetle fuse


At the fuse panel, the left headlight low beam is protected by 10A fuse 21 and the high beam is protected by 10A fuse 19. The right headlight low beam is protected by 10A fuse 20 and the high beam is protected by 5A fuse 3.

Sep 16, 2012 | 2006 Volkswagen New Beetle

1 Answer

Replace headlight on a Pontiac Grand Prix


The Grand Prix uses separate bulbs for low beams and high beams. The low beams are located on the outer edge of the headlight assemblies while the high beams are located on the inner edge of the assemblies. With this in mind, locate the position of the burned out bulb prior to replacing it.



Things You

Oct 01, 2011 | 2006 Pontiac Grand Prix

1 Answer

How to replace toyota matrix front headlight bulb


Hi,

Replacing a headlight on a Toyota Matrix is a simple process that only requires the use of a screwdriver and a replacement bulb. The Matrix uses 9006 bulbs for the low beams and 9005 bulbs for the high beams. Headlight bulbs can be purchased at auto parts stores.
Replacing Low Beam Bulb
  1. Turn off the engine of the Matrix and open the hood
  2. Rotate the bulb base in the headlamp assembly counterclockwise to remove the low beam bulb. Unplug the electrical connector. If the connector is too tight, wiggle it slightly to help remove it.
  3. Install a new bulb into the connector and place it into the assembly. Rotate it clockwise to lock it into place. Close the hood.
Replacing High Beam Bulb
  1. Turn off the engine of the Matrix and open the hood. If replacing the left-hand headlight, remove the air cleaner duct by removing the securing clip with a screwdriver and pulling the duct out of the vehicle.
  2. Turn the bulb base counterclockwise to remove it. Unplug the electrical connector.
  3. Install a new bulb into the connector and place the bulb into the assembly. Rotate it clockwise to lock it into place. Reattach the air cleaner duct if replacing the left-hand headlight. Close the hood
I hope this helps.

Best regards.

Oct 29, 2010 | 2005 Toyota Matrix

2 Answers

The low beam lights do not work I have tried a new bulb and replacing the fuses. the high beam lights do work


You may have to check a few items here. Do the high beam lights only work when you "flash" from the combination stalk or do they work when you have headlight switch turned on and then select high beam from stalk..? You may also want to check out the headlight relay. If this is OK, you might have a headlight switch issue or the combination stalk may be faulty.

Feb 28, 2010 | 1984 Porsche 944

1 Answer

I have a 1998 Chevrolet K2500 that the headlights are not working correctly on. When I turn the headlights on nothing comes on unless I turn on the high beams, only the high beams are on, no low beams. ...


Somehow the tan wire from the low beams has been cut from the hi/lo switch and is now attached to the brown wire from the headlight switch. Trace the tan wire from the headlights to the hi/lo switch to see what happened.

0996b43f80231a23-jnh1p0frnkt3q2fbcpfimq4v-1-1.gif

Aug 11, 2017 | 1998 Chevrolet K2500

1 Answer

1993 corsica--low beams work fine, no high beams.


Check the fuses under the hood...chances are it's one of them....there's not much left to check after that....check the fuses inside the car as well...it might be the high beam switch is bad that switches the low beams to high beams inside the car.

Apr 19, 2009 | 1993 Chevrolet Corsica

1 Answer

Highbeam Headlights not working


try replacing the fuse because low beam and high beam are two different systems

Aug 07, 2008 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1999 Chrysler Concorde Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...