Question about 2004 Honda Accord

3 Answers

When excelling up to 40 miles per hour I feel bumping in the front end of the car as if I am going over a slightly rough road, but the road is smooth

Posted by on

  • CarySchroeder May 11, 2010

    My first inclination is that the engine is mis-firing, and once you exceed that speed, the problem is just not noticable as much. Perhaps someone else can point you to a more definitive answer.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Check the inner cv joints mine had a mark on the inside of the cup causing a vibration on acceleration

Posted on Mar 27, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Honda Master
  • 1,013 Answers

Check for blebs on you tyres and shocks as this could be causing the rough ride

Posted on Jul 25, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 347 Answers

Check front tire and then struts

Posted on Oct 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Suzuki forenza 5 speed 80,000 miles car preforms as expected in all aspects except suspension car handles beautifly on smooth surfaces but as soon as you hit a dip or bump in the road it feels li


good luck with the Daewoo GM/ suzuki blunder box.?
find a suspension shop in town, as them to check it.
some will for free.
we can't drive it ,feel it or hear it , on here.

Jun 20, 2014 | Suzuki Cars & Trucks

1 Answer

Vibration when going about 40 to 50 miles per hour feels like whole underneath is vibrating


IF you have rear wheel drive then check the u-joints for wear/loose. Check slip joint for wear . Check rear engine mount is in good condition. Check wheel balancing

Nov 25, 2013 | 2006 Saturn Vue

1 Answer

****? studder or miss?


Do you have a tow hitch on your truck? Does it rattle when driving on bumpy roads? I had a truck same year and make when on a certain road the timing would ****** problem traced to knock sensor.

Mar 02, 2012 | Cars & Trucks

2 Answers

I have a 1993 Jeep Grand Cherokee Laredo. There is a "violent" vibration that occurs only when you are going 40-60 MPH and you hit a bump or pot hole on the highway. The front end begins to...


Vibration from about 40-60 mph is usually attributed to wheel balancing, but the onset when you hit a bump seems to indicate play in the steering linkages (tie rods etc) or suspension members and stabiliser bar rubbers but you had that all checked out, that brings us back to the wheel balancing.

Mar 17, 2011 | 1993 Jeep Grand Cherokee

2 Answers

When I am going about 60 miles per hour the car doesn't run smooth, feels shakey. My tires were replaced in the front about 6 months ago.


if its just at that speed, have the tires balanced again, and get a front end alignment ,, a single bump on a curb can knock it out of alignment

Aug 02, 2010 | 2001 Oldsmobile Aurora

2 Answers

Vehicle hakes when driving 45 to 50 miles per hour


Check wheel balance,
check steering linkages for loosness - such as tie rod ends, steering rack linkages etc,
check driveline for worn/loose joints and bearings.

Jul 07, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Growling/Roaring Noise Front End


sounds like a wheel bearing. typically when you take weight off bad bearing noise goes away. to replace bearing you will need a press to get it off and on

Apr 06, 2009 | 2003 Hyundai Tiburon

3 Answers

Terrible rear end rattle


It's probably the rear sway bar links. If you can jack your car up and check right behind both rear wheels you will be abale to see the sway bar which is connected to short links about 5in long with ball joints.

If either of them are broken or not connected anymore it can cause some pretty loud noises when you ride on rough roads or hit bumps. They run about $35 per link so it's not a very expensive repair.

Mar 30, 2009 | 2001 Dodge Stratus

1 Answer

2005 thumping/rattle front end.


450-$60 per upper strut mount at autozone, and probably 1hr. to 1-1/2 hrs.per side to replace it. Depending on your labor rate in your area. Would recommend alignment after too. Usually if your going to do one, do the other too, because it won't be too far behind the first one to clunk, and then you end up paying for another alignment too. Here's a site that may help, if not exactly what your getting done, pick closest for rough estimate, just add, or subtract parts/labor your not, or are getting done. ( repairpal.com )

Nov 23, 2008 | 1993 Dodge Caravan

Not finding what you are looking for?
2004 Honda Accord Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...