Question about 2003 Chevrolet Impala

1 Answer

How to remove persona window winder handle - 2003 Chevrolet Impala

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 36 Answers

Ok i assume you are talking about the crank, right? if so, there is a retainer clip between the base of the crank, and the door panel. you will need a flathead and some small needlenose pliers. gently pry back the crank at base with screwdriver, and pull out retainer clip with pliers.

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove door panel to get window runner


The panel is usually a pop button type retainers holding the panel on, Obviously all screws will have to be removed ie; grab handle, internal door opening lever, and the window winder,
TIP remove window winder handle with a shoe lace or a lenght of thin material , it's a horseshoe shaped spring clip holding the winder handle on and pulling the shoe lace or material in the opposite direction of clip will easily remove clip (don't loose ) Good luck

Apr 10, 2010 | 2003 Nissan Se R

1 Answer

How do I remove the window winder mechanism on the drivers side door? The window is stuck partly open and I can't seem to move it. Peter


The fault is with the regulator on the window. Remove winder and door handles. Remove door lining and reconnect window to winder rail. Reverse for reassembly

Mar 17, 2010 | 1999 Daewoo Nubira

1 Answer

Removing rear passanger door panel on 1993 toyota camary wagon


mmmm from what i can recall 2 screws in arm rest (two small holes underneath arm rest hides the screws)take these out also one in door handle trim behind handle, And the window winder if you look close in the gap between window winder and door trim you should be able to see a curbed metal pin this holds winder in place so to remove it get a knife ( thin blade will fit in between winder and trim) and push on the end bit of the metal pin and it should spring off and then door handle can be removed. After this run your hands around door trim gently pulling around all edges ect this will pull door trim away from supports

Jun 05, 2009 | 1998 Toyota Camry

1 Answer

Cannot remove window winder


There is a clip behind the window crank (winder). There is a special tool to slide behind the winder that pushes the clip out, the tool is not expensive and can be purchased at most parts stores. It is possible to remove the clip without the tool, but a little tricky (no brute strength!!!). The clip is thin (about the thickness of a heavy paper clip) and 'u' shaped. It slides onto the center backside of the winder. Gently push in the door panel while you gently pry out the winder. You may be able to grab the clip with some very narrow needle nose pliers, or use one or 2 flat thin screwdrivers to slide the clip off. Let me know how its goes.

May 01, 2009 | 1996 Ford Explorer

1 Answer

Drivers door will open from inside but not outside.


there is a clip on the back side of the window winder handle it is in the shape of a c you need to take a pair of neddle nose plires and pull the clip out and the handle will come off

Mar 27, 2009 | 2000 Hyundai Accent

1 Answer

Unable to remove window winder and door handle to access the window mechanism


there is a small cleps is behind the window winder u have to remove it before
and there is a small scrow behaind a small blastic cap located behind the door handle u have to remove it

i hope it help dont forget to rating me plz thanx

Mar 15, 2009 | 2000 Daewoo Lanos

1 Answer

I need to remove the drivers internal door panel


Remove plastic studs from door closer. Unscrew three retaining screws. remove grab.
Unhook window winder retaining clip. Best done with small long-nose pliers. window winder retaining clip located inside plastic winder handle section. Will need to prise away winder handle from door slightly to expose clip. locate and gently pull clip from winder shaft.
unscrew door opener / lock assembly retaining screw.
gently prise lower trim retaining press studs from door. remove lower trim.
gently , from rear of door, pull upper trim from door and similtaniously prise upper trim press studs from door.
gently giggle door opener / lock assembly through upper trim . remove trim
gently with flat blade, peel off plastic dust sheeting.
access to inside off door is now possible.
Reassembly reverse of above

Cheers !

ozzy11

Feb 04, 2009 | 2001 Suzuki Swift

2 Answers

How do I remove the manual window winder handle ?


I have to do the same with my door handle on my excel. The Window winder is held on by a sort of circlip thingy and they do make a special tool to remove it, and i would reccommend buying it or even borrowing one from a local mechanic. it is possible to remove it with a screwdriver and some wire but it is very hard and fiddly as you have to do it blind.

Jan 18, 2009 | 1994 Hyundai Excel

2 Answers

Window wont wind up on ford fiesta


in the door handle you will see some plastic caps
remove these you will then find some phillips screwsremove them the handle will com off
same with the window winder handle
then check for other screws then pull door card off. but gently bottem out & top up

Jan 03, 2009 | 1994 Geo Prizm

1 Answer

Window winder handle


the window winder consists of two parts - the handle part and the round part. if you look at the round part, you will see that it consists of two parts. the bottom part can in actual fact be pushed forward (this is the part closest to the door panel). if you push this forward it will un click and you can remove it.
hope this helps
lizanne

Jul 06, 2008 | 1996 Volkswagen Golf

Not finding what you are looking for?
2003 Chevrolet Impala Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...