Question about 1997 Chrysler Sebring

1 Answer

My 1997 sebring turns over, but does not start

My 1997 sebring turns over, but does not star. fuel pump is on. battery was replaced recently. could it be a sensor?

Posted by on

  • Mark
    Mark Oct 07, 2009

    thanks, man, but yeah traditionally that would work...i'm getting fuel, car only has 66,000 on it, timings new, everyone at work says it's the cam sensor, but that's usually related to V6s. um, could it be the starter?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 55 Answers

Make sure enough compression on pistons to ignite the pressured fuel .

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1997 Chrysler Sebring cut out while running, replaced fuel pumd, cranksensor, got used distributer from running car, then replaced the computer and it started!! but cuts out right away!at first would


See if resetting your ECC (ECM) called the computer will get rid of these problems. You do it by unhooking both battery cables, waiting at least 15 minutes and rehooking the battery. No security thing, only the fact the computer needs new settings for the parts you installed.

Sep 10, 2012 | 1997 Chrysler Sebring

1 Answer

1997 chrysler sebring turns over will not start


As with any no start issue, you will need to figure out if it is a spark or fuel problem. Check for spark at the plugs and fuel at the injectors.
Check the ASD relay first.

Aug 06, 2012 | 1997 Chrysler Sebring

1 Answer

My 1997 Chrysler Sebring JX quick running after coming to a stop at a stoplight I can here the fuel pump hum when the key it turned on cylinders have compression so I know the timing belt is on the crank...


You likely need a fuel pump because you hear the pump, but it is NOT pumping anything- like a well needs priming. Drop the tank and replace the pump.

Oct 30, 2011 | 1997 Chrysler Sebring

1 Answer

I have a 1996 Sebring Convertible that ran perfect one day and the next day wouldn't start. It is getting fuel, the battery turns it over fine and if I shoot Starting Fluid into the air intake, it will...


There's a computer controlled circuit that will kill fuel pressure on some cars right at the last inlet valve at the fuel rail.A bad key or ignition can cause this. don-ohio

Aug 26, 2011 | 1995 Chrysler Sebring

1 Answer

Is the fuel pump on a 1997 chrystler sebring jx in the tank


sure is but be for you do make sure the pump is bad have some one listen by the gas cap
turn the key on and see if the pump comes on for 3 to 5 seconds if not drop the tank
and change the fuel pump

hope this helps you
bob

May 23, 2011 | 1997 Chrysler Sebring

1 Answer

I have a 97 sebring


If you have fuel in the tank, more than likely it's gonna be a fuel pump or pump relay.

Jul 03, 2009 | 1997 Chrysler Sebring

1 Answer

97 sebring lxi, 2.5L - car died leaving driveway. wont start. been running fine, no noises, hiccups and nothing when it died. battery good, changed plugs, fuel pump buzzes when key is turned, engine cranks...


first thing you got to do is determen weather its electrical or fuel problem, you can take a test light and hook to a ground and the light end to a spark plug and see if it lights while someone turns over engine, if it lights you got spark. if its got spark, on to fuel, take fuel pressure test, don't think because you can hear pump working does not mean it is, it can sound like it is but its not, at least putting out enought pressure, not the correct amount it will not run. pumps will go out just that way with no warning at all.

Feb 03, 2009 | 1997 Chrysler Sebring

1 Answer

1997 Sebring starts, then stalls


You need to disarm the alarm, the 2 problems are related, the start and stall is caused by the fuel pump interupt function of the factory alarm, you triggered it when you replaced the battery, The reset procedure is in the owners manual.

Nov 07, 2008 | 1997 Chrysler Sebring

Not finding what you are looking for?
1997 Chrysler Sebring Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...