Question about 2002 Ford Taurus

1 Answer

My 2002 ford taurus has no heat. When I turn the

My 2002 ford taurus has no heat. When I turn the knob to heat the air conditioner comes on i can hear the compressor. Could it be something behind the knob? My air conditioner works fine. I just don't know what the problem is. If someone out there knows, please help me. I keep hearing the air conditioner compresser keep kicking in. I am a 60 year old women with MS and the cold really bothers my disease so I definately want to get this fixed. I hope it's not an expensive problem. Thank you anyone if you can help me.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Make sure both hose are hot meaning there is flow and is not plugged

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 Ford Taurus, Heater blows cold air?


What have you checked so far ?
Radiator full of coolant ? Heater hoses getting hot ?

Feb 23, 2015 | 2002 Ford Taurus

1 Answer

Ford Taurus 2007 air condition is OK, however I get cold air when heater is turned on. Antifreez level is OK.


replace thermostat before you do anything else.. If it is stuck open there will be not heat

Sep 09, 2014 | Ford Taurus Cars & Trucks

1 Answer

Air conditioning vents out of the defrost vents.


pull that knob off use a pair of pliers and turn knob post with pliers. Some times the knob strips and will not engage system try it . hope this helps CJ

Jun 01, 2010 | 2002 Ford Taurus

1 Answer

I have a 2002 taursus I have replaced the thermostat but still do not have HOT heat it is lukewarm. We disconnected the plug to the air conditioner because we noticed the line was cold as if was engaged....


Make sure the heater hoses are HOT. If they are not real hot then the heater core can be clogged. At that point you can remove both hoses where they go into the firewall and blow compressed air through them or a high pressure water hose until it flows freely. It can also be whats called the blend door actuator. This is an electric motor under the dash that closes a door depending on weather you want heat or a/c. We have seen many times when something has fallen down in the defrost vents and is stuck in the blend door keeping it open partially which would cause a poor heat condition (pens,pencils,etc...) Lastly, if this is a manual a/c system meaning it has a knob for hot to cold-pull the knob off and using needle nose pliars turn the shaft sticking out of the head unit in the direction that would be heat. These knobs are known to round off and lead you to think it is turned all the way, but it's not due to the bad knob. I am confident that one of these is you problem because there just isn't too many components to the heater system and this is what we see on a daily basis. Hope it helps!

Dec 06, 2009 | 2002 Ford Taurus

1 Answer

My mother's 2002 ford taurus has no heat. When


yes there is a blend air door that mixes a/c with the heated air and it sounds like it is out of adjustment the other thing is the heater core could be plugged

Nov 10, 2009 | 2002 Ford Taurus

1 Answer

Temperature control panel is broken.how do i get face panel off to fix.1998 ford taurus. air conditioner works but does not come out.


You will need a Ford radio removal tool to fit into the 4 holes in the panel. It will pull out if they are properly engaged. Then, each control knob will pull off revealing nuts that hold each control assembly to the panel. Sounds like you have a broken cable or a vacuum line off somewhere. Hope this helps.

Sep 21, 2009 | 1999 Ford Taurus

1 Answer

Ford taurus, heat doesn't work


check the coolant level and the fan motor

Jan 30, 2009 | 1995 Toyota Pickup

Not finding what you are looking for?
2002 Ford Taurus Logo

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...