Question about 2001 GMC Yukon

1 Answer

The right side window came off it's track and I need to know how to get the panel off and fix it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can access all the parts

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My driver side window will not roll down properly. I stops about half way and seems to bend inward toward the car instead of going down further. I have taken the door panel off and can not tell exactly...


remove the door panel. it may have come off track. go to any auto parts store and buy a haynes manual for your specific car. they are based on a complete teardown of vehicle. this book will show how to remove door panel. they are about 20 to 25 dollars.

Dec 15, 2010 | 1997 Dodge Neon

1 Answer

I need to know how to get the drivers side door panel off. My window is off track and I need to fix


how to remove door panel on a 97 expedition, pull up on master window switch bezel careful clips break easily and unplug the connectors, remove triangle trim piece top right side of panel pull out then up, screw behind it remove it, remove red lense plastic piece on bottom of door small screw driver careful breaks easily screw behind it remove it, remove bezel around door handle turn it to get off handle screw behnd it remove it, pull straight up on door handle gently then hard if needed, after it is loose from door remove light bulb socket from behind door panel turn it, unplug power window switch.
thats it reverse to put back on

Nov 25, 2010 | 1997 Ford Expedition

1 Answer

Rear passenger window right side off track


this problem is very easy to fix,,open door look for bolts or screws all around inside of door ,take them all off,then take door panel off ,,you will then see track with window on it loosen two track nuts ,fit window into track then tighting nuts ,put back on panel ,all screws bolts ,ect ect ,JOB DONE

Jun 18, 2010 | 2007 Dodge Nitro R/T New Cars

1 Answer

1990 Passenger window keeps falling off tracks. Had new window replaced because it shattered, but still doesnt roll down right. What is wrong?


Your window has a lower glider that floats on a track, and sometimes when people replace the glass they fail to replace the stopper on the end, which acts as a brake. If you can see the track with the panel off, watch as you roll up the window and see if the rollers stay in the track. Also remember that the glass has a glider glued to its back side to keep the window level as you roll. The most common problem here is the glass slipping off track, and a new track inserted into your window frame will fix that (Dealer Item)

Mar 10, 2010 | Buick Regal Cars & Trucks

1 Answer

How to repair Power Window Switch on front Driver's side. Window will go down, but not up. Plus now, front window on passenger side sometimes doesn't respond.


The reason that they go down but not up is because they are usually binding in the track inside the door. You can remove the door panel and grease it with silicone grease to fix the problem. Usually its not the switch, but if you press it too much the switch will get burned out because it overheats inside from the current. If you remove the door panels, you should be able to switch the left and right switches to trouble shoot the switches. If you switch them and the right one goes down now, then you know the old right switch is bad.

Sep 12, 2009 | 1999 Nissan Altima

1 Answer

Right rear window is off the tracks. How do I remove the panel?


if the window is off track the regulator is probably bad. to remove the door panel should be a couple of screws by the inside pull handle and possibly one by the door handle itself also check the bottom of the door for any then just pull it off and lift up to clear latches and remove plastic film to get to inside of the door

Aug 30, 2009 | 2001 Oldsmobile Aurora

1 Answer

2005 Chevy Colorado window is off track


remove the door panel and check the operating mechanism ,bet that one of the fixings on the lower part of the window that lifts and lowers it is adrift

Aug 05, 2009 | 2005 Chevrolet Colorado

1 Answer

Rear driver's side window is off track. i need to know how to remove the door panel to get back on track. window motor sounds like it is working in both directions 2001 hyundai sonata


Remove the upholster on the door panel. then, loosen the bolt of the window mechanism..and also the bolt of the track of the window, so you can put the window back on its track. then, you can stabilize it by looking for the right adjustment of the mechanism.

Apr 18, 2009 | 2001 Hyundai Sonata

1 Answer

Driver side window is off track and stuck about 75% closed


If your power window motor is not moving up or down at all inside the door panel, you will need a new motor.
If your window is stuck and will not move, it is the motor - it is bad.
If your window falls down into the door panel, the window is off track.
Replacing a window motor is an easy fix, get another one from an auto parts store and replace it.
Good luck!

Mar 12, 2009 | 1993 Honda Accord

2 Answers

Window


YOU HAVE A BAD WINDOW REGULATOR WHEN YOU ROLL IT DOWN IT COMES OFF TRACK SO WHEN YOU ROLL IT UP YOU RUN INTO THIS ISSUE

Nov 08, 2008 | 1996 Honda Civic

Not finding what you are looking for?
2001 GMC Yukon Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...