Question about 1995 Chrysler Concorde

2 Answers

Where is the OBDI connector for a 1995 concorde 3.5L. I found two plugs next to the relay box but they look like just seperate fuses

Posted by on

  • srdjan_acimo Oct 07, 2009

    anybody have a schematic/picture of what it is suppose to look like? I know what a OBDII looks like but all OBDI seems to different?



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 153 Answers

Under sterring whee,l right side, up underdash near centerconsole/radio area

Posted on Oct 07, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

It might be under the driver side dash panel. Some Chrysler cars had them there.

Posted on Oct 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuel pump won't run unless engine is cranking, but won't start

Are you sure it's running when cranking? It should have come on when key turned on.
This is for camrys up to year '91. It may apply in your '95, also. Check the 7.5 amp ignition fuse and the 15 amp EFI fuse and the EFI main relay, all located in the fuse box next to your battery. There is also the circuit opening relay tied in to fuel pump operation. It is usually found under center of dash. It is usually not the problem, but it is part of the checks for fuel pump operation.
If your car has a " check connector" or "service connector" (also called a fuel pump check connector) under hood on driver's side near the firewall (a little 1 inch cube with a cap on it), then bridge terminals +B and Fp with a jumper wire. Turn key to on (don't start car). The pump should come on. Listen for fuel return noise from the fuel pressure regulator, and verify pressure in hose from the fuel filter. If nothing, check those fuses above. Here is how power runs to pump: Battery to 40 amp main fusible link-to 15 amp EFI fuse-to EFI main relay-to circuit opening relay-to fuel pump-to ground. Ignition switch and the computer (ECU) work the relays to pass power to pump. Hope this helps some, Randy. Good luck.

Nov 10, 2011 | 1995 Toyota Camry

1 Answer

My o b d connector will not fit the plug in on car

they changed the plug in 1996 so if you are trying to use an OBDII code reader, it won't work on yours. Your car most likely has the OBDI plug.

Sep 04, 2011 | 1995 Volkswagen Jetta

1 Answer

Where is the switch/commutateur located in 1995 jeep cherokee

if you are refering to the ignition switch, there is a black box described as the power distribution box under the hood on the drivers side, inside is fuses and relays to your vehicle. next to it is another box with fuses, on the inside of its cover tells you what each fuse and relay is for. hope that this information has helped you.

Mar 17, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Rear window defogger does not work in 2007 impala

ck relay under hood for click when defog button is pushed,if this relay clicks switch and relay should be ok,just found same problem with mine,remove right kick panel where the little fuse box is located and large connector under it i seperated and found burned connector,cut wires on both sides and ran jumper wire,make sure to use proper gauge wire,now mine works good luck

Sep 02, 2010 | Chevrolet Impala Cars & Trucks

1 Answer

I have a 2003 Dodge Caravan with a 3.3L it wont start or even turn over. Run test on electrical system found ignition signal to relay found power supply to the relay and ground to the relay. When I jumped...

Yes they do but I would rather think you have a bad battery cabe connection to the system, sometimes the battery cable corrudes and you can't see it try replacing the cable ends and the connector ends espically if they are by the battery.

Jun 18, 2009 | 2003 Dodge Caravan

1 Answer

The cooling fan in my 1995 chrysler concord never stops running.

I have a 1995 also my would get warm if a was stopped and running for a while. It kept blowing fan fuse so i replaced the fans and have not had a problem with that since.

May 22, 2009 | 1995 Chrysler Concorde

Not finding what you are looking for?
1995 Chrysler Concorde Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides