Question about 1988 Mazda B2200

1 Answer

The truck doesnt want to idle

Have to keep gassing it so it doesnt cut off and after it gets going it starts to **** when im gassing it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 153 Answers

Check and see if your air inlet tube has a crack or hole in it between the throttle body and the mass air flow sensor

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car cutting while driving and idling just keep going up and down


Check your RPM, check if it is rushing when you turn it on. Set the RPM needle to exactly 1.
Try this first.
or.......................

When slow down and stop the car engine shuts off Inspection Service Cost...
R33 GTS RPM Gauge Cluster Fix FIJI

Aug 23, 2016 | Chevrolet Cars & Trucks

1 Answer

My 91 Chevy s-10 2 wheel drive p/u w/2.5 four cylinder wont idle and runs rough when i rev the motor which the only way i can keep it running is to feather the throttle. If i unplug the vacuum to the


the problem if from the map sensor.. when you change it it will run rough and keep cutting off,, keep stating it back and reeving over and over as soon as it cuts off again keep repeating until the CPU gets calibrated with the new sensor and it starts idling smoothly..

Dec 30, 2012 | 1991 Chevrolet S-10

1 Answer

99 Mercury Mystique


First, is the check engine light on ?
If the vent is not working for the tank, the fuel system can have trouble pumping fuel from the tank.
I would check fuel pressure at idle and cruise speed. Also try running with the gas cap off.

Jul 24, 2012 | Cars & Trucks

1 Answer

Need to know how to replace my power steering pump.


There's an O-ring on those oil lines,maybe you cut or lost one.They're available at your local parts store.I hope that's all it is,not your power steering pump or rack.

Dec 11, 2009 | 1995 Chevrolet Camaro

1 Answer

It doesnt idle properly and when i give it gas it lags


http://www.cardiagnostics.be/wds2000_bestanden/Ford%20diagnostic%20trouble%20codes.htm

it says there is a door or tailgate problem, I don't beleive this is your problem. how is it idleing, when you start it when you let off the gass and when you put on the gass please give me all this info, it sounds like a idle control sensor which is a common problems to fix on Fords

May 01, 2009 | 2002 Ford SVT Focus

2 Answers

91 honda accord cut off


Here are the most common causes of surges, stalls at stops, low erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake

Apr 06, 2009 | 1991 Honda Accord

1 Answer

Car run rught an cut of sme times wile driving


Check your acceerator linkage. The cablemay need replacing.

Nov 25, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...