Question about 1989 Dodge Daytona

1 Answer

1989 dodge datona 2.2 turbo coge 13 - 1989 Dodge Daytona

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Hello i got a 1990 dodge daytona shelby the code 13 is MAP sensor signal to the computer (ECU) not changing so the map sensor is should be on the firewall with a vacuum line on it little black box looking thing well make sure it plug in and good and that it dose not have a leaking vacuum line if that dose not work you have a bad map sensor thay run about 30 to 100 at auto zone o onec you think you fix it remove the battery term for about 5 mins with the key on and trun the key off before conttecting the battey back up drive for about 20 mins to see if the code show up if you get code 55 all that means is end of falt code list you mite get a code 12 meaning The battery has been disconnected and the computer (ECU) has been reset hope that help keep that daytona runing it a good car

Posted on Mar 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

89 DODGE DAYTONA NO SPARK AT COIL


If you have no fuel pressure you wont have spark

Mar 02, 2016 | 1989 Dodge Daytona

1 Answer

1989 dodge shadow where to find front transmission mount


Is there more info needed? Answer already there.

Apr 19, 2014 | 1989 Dodge Shadow

1 Answer

Firing order for a dodge spirt 1990


I do not know if you have the 2.5L SOHC, or 2.5L TURBO, or 3.0L V6 Engine; however I have included all of them below.

For the 2.5L SOHC AND 2.5L SOHC TURBO:
Firing Order:
1-3-4-2
Cylinders:
.....(back)
1....2....3.....4
.....(front)
Distributor:
......(back)
......1.....3
(+)............(+)-screws
......2.....4
......(front)
Rotation: Clockwise.

For the 3.0L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
....(back)
1......3......5
2......4......6
.....(front)
Distributor:
.....(back)
(+).2...1
3...........6
.....4...5..(+)-screws
.....(front)
Rotation: Counterclockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Mar 21, 2010 | 1989 Dodge Spirit

1 Answer

1989 dodge daytona shelby with 2.2L 4CYL engine and intercooled turbo. stalls out at around 3500 rom. engine just shuts off, but will restart again.


if its fuel injected id bet the injector timing sensor on the crank or camshaft is on its last legs, get it checked out

Feb 25, 2010 | 1989 Dodge Daytona

1 Answer

Need the firing order for a 1989 merc cougar xr7 turbo 4-- 2.3l


1989 Mercury Merkur Xr4ti 2.3 liter SOHC Turbo L4 VIN "W"

Firing order: 1-3-4-2
Cylinder# Radiator to firewall: 1-2-3-4
Distributor: Clock wise #1 is located by the 1 O'clock position and the next one over is Cylinder #3, 5 O'clock position.

Jan 31, 2010 | 2000 Mercury Cougar

1 Answer

Is there a diagram that shows how the vacuum lines hook up for the 2.5 Turbo ?


b25d94b.jpg

Vacuum hose routing-1989 2.5L California Turbo I engine


07d3442.jpg

Vacuum hose routing-1990-91 2.2L and 2.5L Federal engines with manual transaxles, and 2.2L and 2.5L Canadian and California engines


9f25556.jpg

Vacuum hose routing-1990-91 2.5L Turbo I California engines


8687bd7.jpg

Vacuum hose routing-1990-91 2.5L Turbo I Federal and Canadian engines

Hope helped with this information (remember rated this help) Good luck.

Nov 10, 2009 | 1989 Dodge Daytona

1 Answer

91 datona wont start


That relay you are talking about is your starter solenoid.  If your car is a manual, put it in neutral with teh ebrake on.  Turn the key to the on position.  Take a screwdriver and jump the 2 bigger posts.  If your starter engages, then your solenoid is shot.  They are pretty cheap and easy to fix.  Keep the Dodge's alive!!  PLease rate!

Mar 11, 2009 | 1991 Dodge Daytona

Not finding what you are looking for?
Cars & Trucks Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...