Question about Chrysler Sebring

1 Answer

I need to the replace lower front (right) control arm on my granddaughters 02 chrysler sebring. I have worked on my autos but never replaced a control arm. Help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 17,970 Answers

Check this VIDEO like reference.

The first thing you need to do is remove the old bushings. This can be done in several ways. If you have a press, you can just push it out. If not, you can cut it out with a jig saw, reciprocating saw, or even a simple hacksaw. First thing to do is cut out the rubber center to make room to work inside the ring. Check this DIY Guide.

Hope helps (rememebr rated this).

Posted on Jun 02, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hello i want to grease the bushes on my 2006 Sebring to stop it from squeaking but I do no no where to look to find bushes . Wanted something to show how to do it and need to see what I am looking for

are you sure its the bushings making the noise? first off you dont grease the bushings. a lot of the squeaking i have seen comes from the ball joints. that generally means they need to be replaced. you need to make a real inspection of the front suspension. none of the parts that come on these cars have grease fittings. usually the upper strut bushings are the first to go. like i said, you need to make an inspection. you may have parts that are failing. this can be dangerous if one fails. there are bushings, 2 each, on both the upper and lower control arms. the lowers are where the arm attaches to the frame. the uppers are attached to the upper strut mount. generally you would replace the complete control arm assemblys

Apr 24, 2015 | 2006 Chrysler Sebring

1 Answer

How do you replace a lower control arm on chrysler sebring convertable?

disconnect the lower ball joint and the sway bar link, after that there are just the two bolts holding it to the frame. you may have to pry it out just a little as it dosnt just fall right out

May 26, 2014 | 2004 Chrysler Sebring

1 Answer

On my 2002 Sebring LXi 2.7L there are so many rattles and noises when I go over any size bumps. Had front top strut bushings replaced, but did not help.

Need to check the entire front end at a place like Sears or your dealership to determine what parts have excessive play in them. Sears doesn't usually charge for this service, in hopes that you would have them work on the car in the future.

Sometimes, the cv joints are worn and cause a rattle or clicking on turns. Also, the bushings for the lower control arms sometimes wear out causing a rattle or other noise that can be disconcerting.

When the strut bushings were replaced, were the other parts in the front end checked out?

Good luck on this repair.

Nov 06, 2010 | 2002 Chrysler Sebring

1 Answer

I need to relace the lower control arms and drivers side door handle on my 1999 chrysler sebring lxi

Google "Chrysler Auto salvages" and you should get a hit from Danny's Salvage right here in Tulsa, OK. If he doesn't have the part, he can get it for you in a week-10 days. He should offer remanufactored control arms with a warrentee on them for about half of the dealer's price. I think NAPA carries them too. You will need some specialized tools to do it yourself. Advance, O'Reilley's, and so on rent the tools you need. It's pretty hard, dirty work, and pounding on a "pickle fork" with a 5lb. hammer ain't fun in the driveway. An air-powered splitter is easy. You might want to take it to a front-end shop, because 5 to 1 there will be other parts that need replacing. Played this last year on my '04 Dakota; lower ball joints, AND bushings and some more little stuff.

Mar 27, 2010 | 1999 Chrysler Sebring

1 Answer

I need help locating the horn on my 2006 Chrysler Sebring. I need to replace it.

lower right of engine compartment in front of tire behind plastic inner fender

Mar 03, 2010 | 2006 Chrysler Sebring

1 Answer

2001 Sebring Sedan LX, 2.7l V-6, VIN Code U Lower balljoints: Can the front left and right lower ball joints be pressed into or out of the lower control arms on this vehicle? I'm being told by my mechanic...

Sounds odd... Rikkalan,

(but it appears AMAZON agrees with your mechanic)

Just go to ROCKAUTO and look up your parts...

If the entire arm needs to be replaced the separate ball-joint will not be listed...

Hope this helps!!
RockAuto Parts Catalog

2001 CHRYSLER SEBRING 2 4L L4 DOHC Ball Joint RockAuto

Mar 03, 2017 | 2001 Chrysler Sebring

1 Answer

Need to replace rear camber bolt on 2000 Hyundai Tiburon.

most front wheel drives do have a rear camber bolts on the inside of the lower control arm. you can change these yourself. just mark the rough position of the old ones knock them out and replace with the new bolts. probably 1/2 hour job. real easy but you will definitely need an alignment after.

Apr 13, 2009 | Hyundai Motor 2000 Tiburon

4 Answers


grease ball joints that should fix it

Mar 21, 2009 | 2002 Chrysler Sebring

4 Answers

Front upper ball joint replacement

The dealer's answer (if you are interested).......

The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and locked into the steering knuckle using a special nut. The ball joint is a sealed-for-life type and requires no maintenance. If the ball joint is defective it will require replacement of the entire upper control arm.


Jun 19, 2008 | 2002 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides