Question about 2002 Dodge Caravan

1 Answer

2002 ram 1500 brake and abs light on

Brake and ABS light came on. brakes are brand new on back, just replace rotor and pads yesterday, front was replace two weeks ago. I beleave the emergency brake is locking up. were can i disconnect (emergency brake) it to see if that clears the issue untill i can get backunder the truck to remove the rotors to check the emergencybrake hardware and. pads.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 811 Answers

There should be adjustment under vehicle looks like bolt attached to cable just back off nut and loosen bolt 

Posted on Oct 06, 2009

  • chris quammen Oct 06, 2009

    there should be adjustment under vehicle looks like bolt attached to cable just back off nut and loosen bolt 

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have new brake pads and new rotors, now abs light is on, Why


Interesting question. The ABS magnetic sensors on each wheel can get gummed up with dirt, rust and brake dust. Perhaps the brake shop did not clean the sensor properly, or worse, may have damaged one or more when the rotors are replaced. The sensor also has a tough wire up to the chassis. If this is damaged or disconnected, the ABS light will turn on.

Take it back to the shop and have them check.

May 14, 2014 | Subaru Forester Cars & Trucks

1 Answer

2005 Chevy impala brake pedal pulsation with brand new rotors installed


Is your ABS working properly? Under heavy braking the ABS should engage and 'pulse' the brakes on/off. It is normal to feel the brake petal flutter or pulse under your foot.

Under light braking there should be no pulsing as the ABS does not engage and you have changed the rotors and pads.

Nov 19, 2013 | 2005 Chevrolet Impala

1 Answer

I put new brake pads on the front and now i dont have a full pedel of brake.The abs light and traction light are both on


how much brake fluid did you remove or put brake shoes on wrong reason abs light on.check brake fluid.when replace front brakes you have make sure mastercylinder reservoir corver on then pump brake pedal seat brake shoes against rotor then check brake fluid level.

Dec 27, 2012 | 2000 Chrysler Concorde

1 Answer

My 2007 nissan quest 3.5S mini van is in almost perfect condition until I recently discovered something deviating from what I know is common to brakes. I do all maintenance work to my cars (nissan VW,...


Master cylinder and/or brake booster could be the problem. A tiny bit of air in the system will effect your braking abilty. A fault in the ABS system would prompt the computer to trigger the ABS light. If you have brake shoes on the rear, make sure they are properly adjusted. Hope this helps.

Jul 04, 2011 | 2007 Nissan Quest 3.5 Minivan

1 Answer

The front left brake is doing all the braking and is heating up. brand new caliper on both sides and new rotors and pads. Had to repair yesterday because the pad on the left was sticking to the Rotor...


ABS LIGHT ON COULD BE A BAD WHEEL SENSOR CAUSING ABS UNIT LOCK UP THAT WHEEL OVERHEATING OR YOU COULD HAVE FAULT IN THE ABS UNIT.TAKE VECHICLE TO GARAGE OR DEALERSHIP.LET THEM SCAN THE ABS BRAKE SYSTEM TO SEE WHATS CAUSING ABS LIGHT TO COME ON.

Sep 23, 2010 | 1999 Oldsmobile Alero

1 Answer

1995 dodge neon below 10mph foot on the brakes the abs noise no light it sounds like a drinding noise


Brake pads are worn out. The ABS light would not come on because there is nothing wrong with the ABS. The grinding you are hearing are the brake pad backing plates rubbing against the rotor. You should have heard a high pitched squeal long before this happened. More than likely the rotors are now destroyed and will need replacing or at the very least turned in a machine shop. Fix this yesterday.

Nov 23, 2009 | Dodge Neon Cars & Trucks

4 Answers

The light ABS is on aND THERE IS A NOICE ON THE LEFT FRONT WHEEL


These definitely sound related. Need to inspect to see if it's something loose (like a wheel sensor) or the brake pads need replacing, etc. etc...

Charlie

Aug 23, 2009 | 2003 Chevrolet Suburban 1500

2 Answers

A.B.S. Sensor & Brake replacement


master cylinder or brake booster

Aug 17, 2009 | 2007 Mazda B4000

2 Answers

Brake pedal vibrates while braking and doesent stop right away


There's speed sensors at each wheel. You may have got some contamination in front of one of them... sounds like the abs is trying to compensate for un equal speed at each wheel... and something may be blocking a proper read at one of the wheels...

Jul 23, 2009 | 2002 GMC Sierra 1500

Not finding what you are looking for?
2002 Dodge Caravan Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...