Question about 1990 Chrysler New Yorker

2 Answers

I have a 1990 Chrysler New Yorker. The turn signals don't work. When I turn on the hazard lights they work. I believe it is the relay fuse for the turn signals. The one I cant find is not located in fuse box inside the glove box or the fuse box in the engine compartment. The owners manual says there is a third fuse box "located near the fuse block at the right lower corner of the instrument panel." I can't find it. I'm starting to think it does not exist.

Posted by on

  • Mike Paster Oct 08, 2009

    It was the flasher I Had to take out the glove box to find where it was. You have to take out the glove box. it's above it, you can not access the flashers without doing so.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The other fuse box id behind the fuse box in the glove box i had same problem

Posted on Nov 14, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 501 Answers

If the lights work with the hazards, your problem is not a fuse. You need what is called a multifunction switch. It is the switch that the directional arm goes into. It can be difficult to replace,

Hope this helps

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine fan does not turn on....


fan motor, relay, fuse, no signal from computer
A mechanic will check for voltage at the motor and work backwards.

Jun 28, 2012 | 1990 Chrysler New Yorker

2 Answers

Where is the fuse for power windows?


I know on a 83 its located by the glove compartment ,, try looking there

Aug 02, 2010 | 1990 Chrysler New Yorker

1 Answer

1990 chysler new yorker wont start


check fuses and relays before suspecting the pump. if fuses and relays are good, access the fuel pump power connector and check volatage

Mar 26, 2010 | 1990 Chrysler New Yorker

1 Answer

Power windows turn signal and ac/heat wont work


Had the identical same problems on our Chrysler Concorde. We checked all fuses and relays nothing. Then we checked the wiring on the ignition switch mounted under the steering column it was loose. Repositioned it and everything worked perfectly again. Did not cost a thing. Hope this helps!

Sep 26, 2009 | 1994 Chrysler New Yorker

2 Answers

1990 Chrysler New Yorker cooling fan no power


Open the drivers door pull the end off of the dashboard and check fuses for heater fan

Apr 06, 2009 | 1990 Chrysler New Yorker

1 Answer

Need to know where the flasher relay fuse is located on a 1993 Chrysler New Yorker.



The fuse panel is located under the instrument panel to the left of the steering column.

The hazard and turn signal flashers are located on the relay module.

HOPE this HELPS EASY way to DETERMINE witch one is for turn Signals is to Turn ON HAZARD FLASHER and this shows that the other one is for turn Signals PLEASE REMEMBER TO RATE ME MOST FOLKS DONT remember to. THANK YOU AND GOOD LUCK

Mar 29, 2009 | 1993 Chrysler New Yorker

1 Answer

Can't find turn signal relay.


check the hazard switch on some cars its part of the hazard switch or if the conection is bad they none of it will work.

Mar 16, 2009 | 1994 Chrysler LHS

1 Answer

1987 chrysler new yorker blinker not working replaced the lights


Just saw this post. Maybe you've already found the answer by now. I have an 87 new yorker. i have the manual that came with the car. The fuse box should be under the stearing column to the left. Cover pops off. The turn signal lamps take a 20 amp fuse. it goes in cavity #10

Dec 10, 2008 | 1987 Chrysler New Yorker

1 Answer

Signal Lights and hazard lights don't work.


Try lower or under the dash on drivers side, in with fuses.

Nov 10, 2008 | 1995 Chrysler New Yorker

Not finding what you are looking for?
1990 Chrysler New Yorker Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...