Question about 2005 Peugeot 405

1 Answer

How can i reset the engine management light on peugeot 307?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Peugeot Master
  • 17,970 Answers

how can i reset the engine management light on - 274bd1a.jpg


The following is from peugeotdiesel.com bot seems to be valid for all models:
1. Switch the Ignition Off
2. Press and hold the tripmeter (mileage reset) button on the dash
3. Now switch the ignition to the ON position
4. Keep the button pressed for 10 seconds
5. The display will read '0' and the service symbol will extinguish.

Also, can disconnect the battery for a few minutes. This should clear the code. Unless you have fixed the problem that set the code it will come on again.

I hope help you with this (remember rated this help) Good luck.

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my oil pressure light comming on my peugeot 307 when the car get engine gets warm


needing an oil change ,or oil sender is dirty and needing cleaned or changed.

Mar 03, 2015 | 2002 Peugeot 307

1 Answer

Engine light stays on


check oil and coolant levels first . Have the fault codes read to find which sensor activated the light as it can be engine or transmission . When you have determined the fault and had it fixed then reset the light with a code reader.

Mar 01, 2014 | 2001 Peugeot 307 2.0

1 Answer

Engine managment light on, cat light on, no power. it has been on diagnostics and new coil pack + plugs fitted as diagnostics came up with coil pack all been reset and drove away ok then got to hill and...


Wasn't properly diagnosed with the codes
that were there at the time any work was performed

Try a different more competent shop

Codes do not tell you what is wrong

Have to use the codes,diagnostic charts
& component test

Sounds like they just threw parts at it

Sep 11, 2013 | 2006 Peugeot 307 1.4

1 Answer

I want a picture of an engine undercover for a peugeot 307 hdi rapier


try ebay adds, or join peugeot public service box and see the diagram

Apr 15, 2013 | Peugeot Cars & Trucks

1 Answer

My clutch won't go down and won't go into any


ABS light coming on,For this get the Engine computer scanned.It can be error codes stored in computer.------------
For more details regarding this click the link below:-----
The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

---------------
And now for clutch not going in gears it can be faulty clutch issue or problem with clutch cable.This has to be inspected.For more detailed instructions regarding Peugeot clutch problem,click the link below:-----
Peugeot 307: Clutch will no go in gears?
http://whoisbyme.blogspot.in/2012/05/peugeot-307-clutch-will-no-go-in-gears.html

---------
This will help.
Thanks.

May 30, 2012 | 2004 Peugeot 307 SW

1 Answer

Engine management light on. car shaking when started.


i think its a common peugeot fault as my 2005 plate 206 and the wifes 2002 plate 307 both have the same problem.

Jul 25, 2009 | 2005 Peugeot 405

1 Answer

Engine management light is on


u will have to get it on a computer to diagnos the problem as soon as possible

Jul 13, 2009 | 2005 Peugeot 405

2 Answers

307 central locking fault


If you have replaced the battery and the ecu wasn't in sleep mode, then you'll lose the synchronisation between immobiliser and fob. go to peugeot dealer or call out a car locksmith who then can reprogram your fob with car ecu. I have read the method in internet but not sure what the steps were. you can google it may be you'll find it.

Jun 28, 2009 | 2005 Peugeot 405

2 Answers

Emission control system warning light stays on


Will be related to engine management in some way, it will need to be checked out by a specialist, might need the particulate filter regenerating££££

Mar 22, 2009 | 2006 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

4,306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

mike hayward

Level 2 Expert

279 Answers

Wahs Team

Level 2 Expert

215 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...