Question about 1998 Nissan Quest

1 Answer

How do i change ignition for 1998 nissan quest

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove the 4 screws on the bottom steering column covers. remove lower than upper. then u will find out that the 2 bolts heads are broken off for security. Drill them out with 90 degree drill or a flat rate mechanic uses a air hammer and cuts it out in 5 minutes or drill it for an hour. Anyways after that you will find the shift interlock cable has a locking black head clip. use 2 small flat screw drivers and pop it free. and be easy on the plugs when unlocking the tabs. get a light and mirror if you first time. good luck Michael F.

Posted on Jan 28, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to I change coil pac on a 04 Nissan Quest

You don't have a coil pack, it appears you have coil on plug ignition, One coil for each spark plug.


Sep 19, 2016 | 2004 Nissan Quest

1 Answer

Need to replace speed sensor on a 1998 nissan quest mini van

the sensor is located on the trans housing above the right axel where it inters the trans

Jul 25, 2012 | 1998 Nissan Quest

1 Answer

Nissan quest fuse diagrams

Look for something labeled similar to IGN for Ignition. Look for any associated relays too. If you turn the key in the ignition, does ANYTHING happen to start the engine...does it click? etc...

Jun 16, 2012 | 1994 Nissan Quest

1 Answer

1998 nissan quest stall at stop light, engine will not start. Engine will crank but not turning over.

Very difficult to advise here as the list of faults for this problem is numerous could be anything from a blocked cat to a temperature sensor and what you need is a mechanic to test drive it so the vehicle cuts on them then a good mechanic worth his salt will have a good idea what it is ,does it restart when cold ?? if so then the autochoke could be defective and in all honesty i couldnt tell you offhand with my head under the bonnet

Feb 25, 2012 | 1998 Nissan Quest

1 Answer

99 nissan quest p0301, I replaced the sparkplugs already and im still having the same code, whats could it be?

Pretty sure this engine has a distributor. Could be a bad ignition wire, cap or rotor. Pick up all 3 and change em out. Pretty cheap fix. Check ebay and put in "nissan quest ignition". Or take a trip to autozone carquest etc... If your engine had coil packs and not a distributor, it is usually a bad pack. Good luck

Dec 31, 2010 | Nissan Quest Cars & Trucks

1 Answer

Need to no how to change starter in 1998 nissan quest

There are many small steps in this process. Do yourself a favor and buy a service manual on CD over on ebay. That way you will have text and pictures and a resource for your next problem. If you can buy a tank of gas, you can afford a manual on CD.

Nov 18, 2010 | 1998 Nissan Quest

1 Answer

1998 nissan quest where is the fuel temperature

In person cars is not a temperature sensor for fuel!!!

Jun 29, 2010 | 1998 Nissan Quest

1 Answer

Diagram location knock sensor quest 1998,I don't find the knock sensor on the nissan quest 1998

it is buried under the intake manifold. But ignore the knock sensor code, it means absolutely nothing. It will not resolve any issue you have. The KS code is usually the result of a broken engine mount.

go here if you have any issues.

Jun 08, 2010 | 1998 Nissan Quest

1 Answer

I have 1998 Nissan quest, the power dies when I turn the key to on(ignition) position. I checked the battery still ok. pls. help

does it do it all the time or when you first start it after it sat for a period of time, if sat a long time something is draining your battery, comething with the charging system or a bad relay that does not shut off

Feb 26, 2009 | 1998 Nissan Quest

Not finding what you are looking for?
1998 Nissan Quest Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides