Question about 2002 Chevrolet TrailBlazer

1 Answer

I have a 2002 Trailblazer. I have changed the

I have a 2002 Trailblazer. I have changed the passenger low beam light twice in 24 hours. There is signs of burn on the plug that goes into the light but the low beam is the only thing that has burned out. Can just the plug be replaced or does the entire assembly need replacement?

Posted by on

  • aculver Oct 07, 2009

    There is signs of burning on the plug. Can just the plug be replaced or does the entire assembly?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 546 Answers

Check the wires to the plug for damage that could cause a short.do not touch the glass on a halogen bulb-the oil from your fingerprint can cause a 'hot spot' leading to premature failure. clean 'dirty' bulbw/alcohol & a clean cloth.

Posted on Oct 06, 2009

  • rtpflh
    rtpflh Oct 08, 2009

    most likely assembly & plug would be 2 separate parts at the dealer.check with an auto recycler [junkyard] for a plug,wires can be spliced.cause of the burning must be identified,or it will just happen again.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the low beam relay on a 2002 Chevy Trailblazer?


under dash above brake pedel the charm box the relay is be side it

Jan 24, 2015 | 2002 Chevrolet TrailBlazer

2 Answers

Why the low light beams don't work


i had a simular problem, if you haven't already check the fueses. try changing the light bulbs.

Jul 07, 2014 | 2002 Chevrolet TrailBlazer

2 Answers

Low beams dont work on 2000 volvo


It can be faulty low beam lamp or its connection issue for low beam lamps.

There are few solved helps links with proper solution to troubleshoot these issues.I suggest you to refer the links below.Click the link:----
Passenger side low beam out?

http://repairhelpcenter.blogspot.com/2012/01/passenger-side-low-beam-out.html

------------
Low beam HID light goes out? http://schematicsdiagram.blogspot.com/2012/01/low-beam-hid-light-goes-out.html
----------2007 Dodge Caliber: Low Beam Headlight Not working http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html
-------------Chevy Tahoe: Low Beam Lamps are not working? http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html
----------2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working? http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html
--------------2002 Toyota Tacoma: Low Beams not working? http://technoanswers.blogspot.in/2012/04/2002-toyota-tacoma-low-beams-not.html
-----------Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html
-----------DRL and Low beams not working? http://schematicsdiagram.blogspot.in/2012/04/drl-and-low-beams-not-working.html
-----------These will help.Thanks.

Nov 25, 2012 | 2003 Volvo S80

1 Answer

How do you change the low beam light on 2006 chevy trailblazer?


For the drivers side, reach down by your alternator and over behind the headlight. You'll feel a 3" round rubber boot. Slip this off and now you can remove the light bulb.

Passengers- Remove the top of the air cleaner, at that point you'll have complete access to the rubber boot and bulb.

Mar 14, 2011 | 2006 Chevrolet Trailblazer

1 Answer

2004 Chevrolet TrailBlazer. Passenger front low beam headlamp out


FACE THE VEHICLE SO THAT BATTERY IS ON YOUR RIGHT;
2.REMOVE THE BLACK PLASTIC PIECE THAT RUNS OVER RADIATOR BETWEEN HOOD LATCH AND FAN. IT IS ABOUT 53 1/2" LONG AND HOLDS THE HOOD PROP CLIP. (3 PLASTIC PUSH RETAINERS & 2 SHEET METAL SCREWS);
3.REMOVE THE GRILL ASSEMBLY UNDERNEATH THE PIECE IN STEP 2 BY PUSHING DOWN FIRMLY ON 4 RETAINER CLIPS WHICH RUN ALONG THE TOP. USE A WIDE SLOT SCREWDRIVER. PULL UP GENTLY ON GRILL ASSEMBLY. IT WILL POP OUT. THE GRILL ASSEMBLY EXTENDS UNDER EACH HEADLIGHT ASSEMBLY (HA) AND IT DISPLAYS THE CHEVROLET LOGO IN THE MIDDLE. MY GRILL ASSEMBLY POPPED OUT EASILY AND ALL THE OTHER RETAINER CLIPS ON THE BOTTOM AND BENEATH AND TO THE SIDE OF HA WERE AUTOMATICALLY RELEASED WITHOUT ANY FUSS;
4.ON TOP OF HA SEE ONE TAB (ABOUT 1" LONG)ON THE RIGHT SIDE AND ONE ON THE LEFT (THE ONE ON L IS CLOSER TO THE FENDER);
5.PULLUPWARDDIRECTION ON TABS. THEY WILL SLIDE UPWARD A COUPLE OF INCHES AND WILL RELEASE THE HA WHICH YOU CAN THEN PULL OUT TOWARDS YOU;
6.AT BACK OF THE HA, REMOVE 2 ROUND RUBBER CAPS (ABOUT 4" IN DIAMETER)--ONE FOR LOW BEAM--ONE FOR HIGH. REVEAL BULBS. UNSNAP THE WIRE HARNESS FROM BULB BASE AND TURN BULB 1/4 TURN CLOCKWISE (REMEMBER YOU ARE FACING THE TRUCK)
7.REPLACE BULB(S). #9006 BULB IS GRAY-BASE, FOR HIGH BEAM ON OUTSIDE. #9005 IS BLACK-BASE, LOW BEAM TO INSIDE OF HIGH BEAM.
CHANGING HIGH AND LOW AND REASSEMBLY TOOK ABOUT HALF HOUR. GOOD LUCK. ALTERNATIVE: IF YOU ARE REPLACING THE PASSENGERSIDE HEADLIGHT JUST REMOVE THE AIR FILTER COVER AND PULL PLUG OUR FROM BEHIND HEADLIGHT AND REPLACE. BE CAREFUL HANDLING LIGHT BULB. TO CHANGE THE ONE ON THE DRIVER'S SIDE JUST REACH IN FRONT OF THE BATTERY TO ACCESS THE PLUG AND HEADLILGHT. TOOK ABOUT 5 MINUTES. ENJOY YOU TRAILBLAZER, GREAT TRUCK.

Feb 20, 2010 | 2004 Chevrolet TrailBlazer

2 Answers

No low beam lights or daytime lights - high beams work


both low beam ights wont work on my VW 2000 beetle I have checked the fuses, bulbs, and relays what could be the problem

Feb 04, 2010 | 2002 Chevrolet TrailBlazer

2 Answers

Why is it that my low beam lights are really low


Bulbs fitted incorrectly.Or your adjustment is out.of line.Adjust them behind the lamp.good luck.

Aug 01, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Low Beams Don't Work!


There is more than one relay I know but make sure your bulbs are good I HAVE seen this happen more than once.. low beams can go at once.. and still have hi beams check this first please .. Jerry

Apr 22, 2009 | 2002 Chevrolet TrailBlazer

2 Answers

2002 trailblazer


All you have to do is find the "round rubber cover" on the back of the headlamp, pry it out with a flathead screwdriver and the lamp is right there.
To remove the headlamp assembly on a Trailblazer, remove the plastic panel that covers the hood latch assembly.
Take the cover for the air filter in order to get to the low beam cover.
Take the 3 screws out of the air filter cover and remove. You will then be able to get to the back of the low beam lamp. The high beam is reachable without this hassle.


Oct 07, 2008 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...