Question about 2000 Toyota Celica

1 Answer

Turn signals I have a 2000 toyota celica gt auto. and for some reason my turn signals and hazard lights don't work. Ive replaced the relay under the dash by the door and still nothing, the relay itself just makes a clicking noise. how do i fix this, i was told to check for another relay but haven't been able to find one yet.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

You may check to see if your hazard light switch is disconnected or loose; if the hazard switch is not plugged in, both your hazards and turn signals will not operate

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1986 toyota celica st turn signal relay location


1986 Toyota Celica 2.0L FI 4cyl

The Flasher is located: Front seating area, driver side, under dash, mounted driver side of steering column. here's a link showing what it look's like. GET 35 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS Here's a new one Timbo. http://www.autozone.com/electrical-and-lighting/turn-signal-flasher/novita-turn-signal-flasher/toyota/celica/1986/4-cylinders-s-2-0l-fi/511475_0_11714

Aug 14, 2015 | Toyota Cars & Trucks

1 Answer

Turn signals not working, Toyota Tundra 2000


Hazards work only when lights are off. Left signal light stays lit on the dash and does not blink and is stuck on (lit up) when lights are lit. If I place hazards on while lights are on only right side flashes and whole dash lights flash too... I replaced the flasher relay and it still does not work. Suggestions anyone? Thanks!

Apr 30, 2012 | 2000 Toyota Tundra

1 Answer

Why my emergency flashers work and my signal lights don't


the hazard lights use a different flasher(relay)then the signal lights.you don`t say if the signals work on one side or not,you should check the fuses for the signal lights in the fuse panel under the dash on the drivers side.if you put the hazards on and find the flasher then you will know what the signal flasher will look like,it is on the fuse panel and replace they should work.

Mar 18, 2011 | 2000 Buick LeSabre

2 Answers

Dash and tail lights stopped working on my daughters 1991 toyota celica gt. the fuse has been checked and replaced. it was ok. the headlights were recently changed. is it true the dash and tail lights run...


If the tail lights and the dash lights stopped working and the tail light and the panel lighting fuses are both o.k. and you can find no other blown fuses then the problem is most likely the headlight switch.

Apr 23, 2010 | 1991 Toyota Celica

1 Answer

Hazard signal and horn do not work on my 91 Toyota Celica Gt.


Check the flasher & horn relay.Have no idea where they would be on your car.

Jan 27, 2010 | 1991 Toyota Celica

1 Answer

I have a 1997 chevy blazer the hazards work fine but the turn signal is not working I checked the fuse in the fuse panel. what else could it be


Replace the Turn Signal Flasher Relay. It has 2 relays. One for the Hazard lights and one for the Turn Signals. The Turn Signal Flasher Relay is located Front seating area, driver side, passenger side of steering column, under dash, mounted near cigarette lighter. Optional mounting location is under dash, on driver side of steering column. (Curtorsey Auto Zone)

Dec 15, 2009 | 1997 Chevrolet Blazer

1 Answer

The blinkers on are ford don't work we tried to but in fuses but all the fuses work


If the lights come on but just do not flash, replace the flasher relay. Your Thunderbird has 2 flasher relays. One for the Turn signals and one for the Hazard lights. The turn signal relay is located Front seating area, driver side, under dash, driver side of steering column, mounted in lower corner of fuse block . The hazard relay is located Front seating area, driver side, under dash, driver side of steering column, mounted in rear of fuse block. Replace the one for the Turn Signals. Information Curtorsey Auto Zone.

Nov 17, 2009 | 1988 Ford Thunderbird

2 Answers

2000 Jeep Cherokee Sport Turn Signals/Hazzard lights don't work


yes that's correct... you need to replace the flasher unit

Feb 23, 2009 | 2000 Jeep Cherokee

Not finding what you are looking for?
2000 Toyota Celica Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...