Question about Subaru Legacy

Open Question

P0700 and P1710 on transmission ?? on Legacy 3.0 R 2004 what is the sensor concerned ?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2003 chyrsler 300m it went in limp mode codes p0700. P0340 p0344 p0430 p0888 came up cleared the codes and now it knocks.

clearing codes wont correct the problem and limp mode is designed to protect motor and transmission - p0700 is a transmission problem
P0700 Transmission Control System Malfunction p0340 is camshaft position sensor malfunction p0344 is also a camshaft position sensor circuit problem
P0344 Camshaft Position Sensor Circuit Intermittent your p430 is a cat converter problem and p0888 is transmission relay problem these reasons are limp mode the knock can be fuel not burning correctly or a lower engine knock can mean you damaged a piston

Nov 08, 2016 | Cars & Trucks

1 Answer

P0876, p0700, p0731, p0841

p0841 transmission fluid pressure sensor/switch "A" circuit range/ performance. p0876 transmission fluid pressure sensor/switch "D"circuit range performance. p0700 transmission control system malfunction. p0731 gear 1 incorrect ratio.

Aug 28, 2014 | Cars & Trucks

1 Answer

Codes 700,562 on 02 dodge intrepid

P0700 Transmission malfunction, P0562 A/C pressure low,The 700 is a concern first and most of all but it did not pin point exactly,If anything a "A" code suspended the true transmission code,So somewhere in the mix is a missing code,clear the code, do a 2 trip run P0700 will come up with a exact code like is it a incorrect gear ratio,or input sensor or output sensor ,as for low A/C leave that alone for now.Because you are a Chrylser how is the fluid when you check it idle in park at operating temperature is it discolored do you have the wrong fluid is it foamy,

Mar 17, 2012 | Dodge Intrepid Cars & Trucks

1 Answer

What is causing my car to say transsmisson control problem

P0700 Transmission P01776 Ignition ****** request. P0870 Transmission fluid pressure sensor C. Your main concern is the valve body assembly this will take care of P1776. And as for the P0870 you will need the solenoid pack also. Before you decide to attempt this try a relfash of the TCM(transmission control module)

Feb 23, 2012 | 2002 Dodge Intrepid

1 Answer

2006 tribeca subaru b9 p0700 and p1844 code pops up when I plug in the diagnostics unit. what do they mean?

both codes are related.

code P0700 transmission control system

code P1844 transmission fluid pressure sensor.

most likely cause is a bad transmission fluid pressure sensor this sensor will set both codes. have someone with a scanner rad the info from the sensor it is most likely open or guess replace the sensor.

Sep 30, 2011 | 2006 Subaru B9 Tribeca

1 Answer

P0700 am I able to fix this myself?

P0700 - Transmission Control System Malfunction

HI, this will need the attention of a skilled transmission tech. the TCM(transmission control module/PCM) is signaling an issue that is a major concern. A diagnostic scan is needed at this time.

The most common issue will be a fault wiring harness but, this could also be an issue that concerns the speed sensor connections as well.

NOTE: Low fluid level can be the cause of many transmission problems. If the fluid level is low locate and repair the leak then check and adjust the fluid level per the Service Information

This repair will cost around 1500 or so. the PCM , if damaged, is a dealer part.(must be ordered and installed by the dealer)

Jul 10, 2009 | 2005 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

465 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides