Question about 2002 Chevrolet TrailBlazer

1 Answer

I am trying to remove the ball joint on a 2003 trailblazer how do i get it of of the swing arm?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

If its riveted you have to use an air chisel to cut them off...the new ball joint will come with bolts.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Any ideas why a 2003 chevy trailblazer may vibrate in the front but stops when you turn left


Does the vehicle make any noises while driving? If there is a "growling or roaring " noise associated with the vibration, check the right front hub bearing. If there are no noises and only vibration, check the right front upper ball joint and control arm bushings. The Trailblazer's upper ball joint and control arm bushings become worn and cause the tire and wheel assembly to shimmy while driving. The vibration stops when turning left because of weight transfer to the right side which keeps the wheel steady for a moment. Also, check the tire for irregular wear.

Mar 05, 2015 | 2003 Chevrolet TrailBlazer

1 Answer

RACK & PINION STEERING


undo the steering shaft at the rack. remove the tie rod ball joints from the steering arms . Undo any hydraulic hoses ensuring you tag each hose to replace it in the correct position. Undo the bolts holding the rack to the frame. You may have to remove a wheel to facilitate removing the rack side ways out of the space.

Feb 19, 2014 | 2003 Chevrolet TrailBlazer

1 Answer

How do i replce ball joints on a 99 pontiac sufire


Lower Control Arm Ball Joint Replacement Removal Procedure Tools Required J 43828 Ball Joint Separator
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement .
  4. Remove the wiring harness from the lower control arm.

  5. 165249.gif
    tif.gif
  6. Remove the cotter pin (1) from the ball joint (3).
  7. Remove the nut (4) from the ball joint (3).

  8. 490085.gif
    tif.gif
    Notice: Use only the recommended tools for separating the ball joint from the knuckle. Failure to use the recommended tools may cause damage to the ball joint and seal.
  9. Remove the ball joint from the steering knuckle using the J 43828 .

  10. 491742.gif
    tif.gif
  11. Remove the lower control arm front (1) and rear (4) mounting bolts.
  12. Remove the lower control arm (1) from the vehicle and place in a vice.
  13. Drill out the 3 rivets (3) retaining the ball joint to the lower control arm (2).
  14. Use a 3 mm (1/8 in) drill bit in order to make a pilot hole through the rivets.
    Finish drilling the rivets with a 13 mm (½ in) drill bit.
  15. Remove the ball joint (4) from the control arm (2).
Installation Procedure

    165250.gif
    tif.gif
  1. Install the ball joint (4) into the control arm (2).
  2. Install the 3 ball joint bolts (3) and the nuts (1). Follow the instructions in the ball joint kit. Tighten the ball joint bolts (3) according to the specifications in the instructions.

  3. 491742.gif
    tif.gif
  4. Install the lower control arm (2) to the front suspension support (1)
  5. Notice: Refer to Fastener Notice in the Preface section.
  6. Install the lower control arm front (5) and rear (4) mounting bolts.
  7. Tighten • Tighten the front bolt to 107 N·m (79 lb ft). • Tighten the rear bolt to 110 N·m (81 lb ft).
    165249.gif
    tif.gif
  8. Install the lower ball joint stud (3) to the steering knuckle (2).
  9. Install the ball joint stud (3) through the steering knuckle (2).
  10. Install the ball joint nut (4).
  11. Tighten
    Tighten the ball joint nut to 55 N·m (41 lb ft) plus 180 degree rotation minimum-65 N·m (50 lb ft) plus 180 degree rotation maximum to install the cotter pin.
  12. Install the wiring harness to the lower control arm.
  13. Install the cotter pin (1).
  14. Install the stabilizer link to the lower control arm. Refer to Stabilizer Shaft Link Replacement .
  15. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  16. Inspect the front wheel alignment. Refer to Wheel Alignment Specifications in Wheel Alignment.

Sep 15, 2011 | 2003 Pontiac Sunfire

1 Answer

I have a problem removing the bottom ball joints on 2003 chevy trail blazer need step by step please.


remove steering knuckle with wheel hub and bearing attached ,remove lower ball joint flange with a chisel,remove the lower ball joint using a ball joint press you can rent the press from some local auto parts store or purchased from harbor freight for about 60 bucks.

Feb 25, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

How do I change my lower contol arm, right side in my 2000 ford focus se?


remove the wheel. then take out the lower ball joint bolt.remove the tie rod from the assembly this makes it easy to swing the assembly back and forth. using a ball joint fork insert it between the the ball joint and lower control arm and wack the end on it till the ball joint separates from the control arm. using a pry bar put it thru the control arm so you can pry down on the control arm to release the ball joint then towards the back of the control arm are 2 nuts remove these and remove the cap that they hold towards the front of the control arm is one more nut remove this one and then pull out the control arm replace in reverse orderonetufshoppe_40.gifonetufshoppe_39.gif

Jan 24, 2011 | 2000 Ford Focus

1 Answer

I used a Haynes VW Golf manual to renew a front suspension coil spring on my 2003 Seat Leon but found removal of the strut almost impossible with the lower arm in position.I have now managed to damage the...


Disconnect the front sway bar linkage from the control arm. Disconnect the steering ball joint and lower control arm ball joint then and only then you will have elbow room work around once you have removed the axle nut from the CV joint. Sorry no short cut for this procedure, some even disconnect the control arm from the car to persuade the removal.

May 04, 2010 | 2003 Volkswagen Golf

1 Answer

How do i replace cv joint on a ford taurus 2003 i cant get the control arm off please help


The control arm is attached with the ball joint,remove the nut on the ball joint,and hit around the stud of the ball joint,hit it hard,but do not hit the stud of the ball joint,it will jar it loose,then use a large pry bar,and stick in the control arm and pry downwards,It is not easy to get the ball joint stud out of the spindle,but it is the only way.but make sure the stud of the ball joint is free from the control arm then push down on the control arm(pry)

Apr 24, 2010 | 2003 Ford Taurus

2 Answers

Ball joint replacement-2003 Ford Sport Trac


if you dont have a ball joint press and dont know how to use one then dont do it, but if you do its not that bad of a job just jack the truck up under the control arm remove the brake rotor then take the lower ball joint nut off then use a pickle fork to break the ball joint loose then take the axle nut off push the axle out of the bearing and use the ball joint press to remove and replace the ball joint

Jul 19, 2009 | Ford Sport Trac Cars & Trucks

1 Answer

Lower ball joint removal how to


  1. Remove the steering knuckle with wheel hub and bearing attached.
  2. Remove the lower ball joint flange with a chisel.
  3. Install J9519-E and J34874 to the lower ball joint.
  4. Remove the lower ball joint from the lower control arm using J9519-E and J34874


  1. Install the lower ball joint and J9519-E, J41435, and J45105-2 to the lower control arm.
  2. Install the lower ball joint to the lower control arm using J9519-E, J41435, and J45105-2.
  3. Remove J9519-E, J41435, and J45105-2 from the lower control arm
    1. Install J9519-E and J45105-1 to the lower ball joint.
    2. Flare the lower ball joint flange using J9519-E and J45105-1.
    3. Remove J9519-E and J45105-1 from the lower ball joint.
    4. Install the steering knuckle with wheel hub and bearing attached. Install the tire and wheel.
    1. Lower the vehicle.
    2. Check the front wheel alignment.
these jouints are pressed in and there is a flange that is flared this is what the tool numbers refer too.

Sep 12, 2008 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...