Question about 2000 Buick Century

2 Answers

Power window dropped in the door - 2000 Buick Century

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Could be the regulator..

my window did that aswell, and i also here from other friends the same thing. The back right one went out at about 40k miles, and the other one did at about 70k

Posted on Oct 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Buick Master
  • 2,007 Answers

Remove the inner panel. Probably fell off the track or a rod or cable has broken or come unhooked.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When locking front drivers door window drops .door locks but window stays down 4 inches


Alan, Volvo, Window relearn procedure required.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Thread how to do power window calibration

Power windows

http://www.smellybum.co.uk/Reset%20of%20locks%20and%20window%20mechanism%20on%20Volvo%20cars.pdf

Mar 22, 2016 | Volvo C70 Cars & Trucks

1 Answer

No dome with door open and no window drop


Chevrolet Silverado 1500 Questions - went out to go to work ...

www.cargurus.com > Questions > Chevrolet > Silverado 1500
CarGurusFeb 28, 2014 - No, If new battery or fully charged the truck and radio would work, at least for a little while. ... issues, radio, door chime, power windows and door locks all still not ... The BCM wake-ups are: Door ajar switches Door handle switches Domelamp ... any door is opened and then the power lock switch is pressed.

Sep 16, 2015 | Cars & Trucks

1 Answer

I have an 06 pt cruiser when I bought it couldn't open door from inside. Suddenly door opens from inside and window won't come down what's the problem


Tests/Procedures: 1. Check the power and ground at the master switch mount in the dash. Pin 12 is power at key on and pin 4 is the ground.

2. Next try driving the left front window by applying power to pins 13 and 14, switch polarity should drive the window up and down. If not, check for broken wires in the between "A" pillar and the door, then gain access to the window motor and try applying right at the motor.
Tests/Procedures: 1. Check the outside door handle switch. It should ground the Orange/Yellow wire when the handle is raised. Tech Tips: The power window should drop slightly whenever the door is opened. The ensures a tighter seal to the convertible top.

May 04, 2015 | 2006 Chrysler PT Cruiser

1 Answer

1996 Mercury Mystique Window


Here are the instructions:
    • Gently remove the door panel of your Contour, ensuring that you don't break the three door clips that hold it on. As you pull the panel from the door, support the panel from below. This will ensure that none of the wiring inside the door is damaged. Release the wiring from the components inside the door, including the power window mechanism, power lock mechanism (if equipped) and the stereo speaker. Place the door panel in a safe area with the clips so they are accessible when you are ready to replace them.
    • 2Remove the window glass by sliding it up and out of the door. Support the glass from the bottom so it doesn't drop and break. Window glass for a Contour can cost around $150 to replace. After you remove the glass, put it in a safe place. You may want to wrap it in old towels or blankets to protect it until you are ready to reinstall it.
    • 3
    • Unplug the wires from your Contour's window motor, and remove the screws from the window motor and regulator. Remove the power window motor and regulator from your Contour to make way for the new parts.
    • 4Install the new window regulator into the door, and replace the screws that held them in place.
    • 5Replace the window glass into the door, and connect it to your Contour's power window motor and regulator assembly.
    • 6Replace the door panel. Reconnect the wiring for the power window and power lock controls, and replace each clip that connects the panel to the door.

Jul 26, 2012 | 1996 Mercury Mystique

1 Answer

My 1992 ford f-150 flareside passenger power window dropped but the motor still works, whats wrong?


Glass has come off track or the window regulator has either broken or came off track. Remove the door panel to find out.

Jul 19, 2012 | 1992 Ford F150 SuperCab

1 Answer

How do you replace front drivers side window motor 1997 mercury mystique


The motor and regulator need to come out here is how to do that.

Instructions
    • 1Gently remove the door panel of your Contour, ensuring that you don't break the three door clips that hold it on. As you pull the panel from the door, support the panel from below. This will ensure that none of the wiring inside the door is damaged. Release the wiring from the components inside the door, including the power window mechanism, power lock mechanism (if equipped) and the stereo speaker. Place the door panel in a safe area with the clips so they are accessible when you are ready to replace them.
    • 2Remove the window glass by sliding it up and out of the door. Support the glass from the bottom so it doesn't drop and break. Window glass for a Contour can cost around $150 to replace. After you remove the glass, put it in a safe place. You may want to wrap it in old towels or blankets to protect it until you are ready to reinstall it.
    • Sponsored Links
    • 3Unplug the wires from your Contour's window motor, and remove the screws from the window motor and regulator. Remove the power window motor and regulator from your Contour to make way for the new parts.
    • 4Install the new window regulator into the door, and replace the screws that held them in place.
    • 5Replace the window glass into the door, and connect it to your Contour's power window motor and regulator assembly.
    • 6Replace the door panel. Reconnect the wiring for the power window and power lock controls, and replace each clip that connects the panel to the door.

Jul 01, 2012 | 1998 Mercury Mystique

1 Answer

Mustang drop down windows to clear roof moulding don't work. any suggestions?


i have a 2004 mustang v6, my windows do not drop when you pull the handle to open the door, and they clear the top just fine. i don't know where you hear they do, i would like to know.

Feb 09, 2012 | 2004 Ford Mustang V6

1 Answer

Power window open partially with inside or outside


inside the mechanical lock (The part that actualy holds the door shut when you close it) there is a switch that informs the control unit that the lock is either locked or unlocked.
These switches fail sometimes, when this happens the control unit is not aware that you have opened the door, and therefor will not wind the window down slightly.
The switch is integral with the lock unit, and they are not easy things to replace either.

Feb 20, 2010 | 2003 Volkswagen New Beetle Convertible

1 Answer

Battery drain from power door locks on 96 Grand Cherokee


The Module in the Drivers Door is notorius for this problem. I would start by changing that first. Good luck to you. Thanks for using fixya!

-JC

Jan 15, 2009 | 1997 Jeep Grand Cherokee

1 Answer

1997 Nissan Altima Driver Power Window


Then power window regulator cable is snapped out its place ,you need to install new power window regulator for the door to fix this issue ...


Good luck...

Nov 06, 2008 | 1993 Nissan Altima

Not finding what you are looking for?
2000 Buick Century Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...