Question about 2000 Volkswagen Beetle

2 Answers

Cannot turn alarm off when i open door with key. want to disconnect by removing fuse but i dont know what fuse controls it

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Hey, had the same problem on my 2000 beetle. try opening the trunk and then closing again. this deactivates the alarm. good luck.

Posted on Oct 27, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 632 Answers

Somehow your Imoblizer has a malfunction. It needs to be hooked up to a compatible scan tool if you don't want the dealer to do it. Disarming isn't as easy as removing a fuse to shut the alarm system off. It is more complicated than that. So many features rely on the anti theft making sure your car doesn't start when security is breached. Have someone with a VAG 1552 scan tool download your DTC's so you can correct your imobilizer problem.

Posted on Oct 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you turn off an alarm for a 2005 Saturn Ion


Disarming an Armed System/Silencing an Alarm
If system arming has been requested by the keyless entry transmitter, it must be disarmed.
Important: Using the power door unlock switch or manually unlocking the doors does not disable the CTD armed mode. Also, disconnecting the battery or pulling fuses does not disable the armed mode, since the BCM stores the CTD mode status in memory.
?€¢
To disarm the CTD system in arm pending mode, SECURITY indicator flashing and doors open, perform 1 of the following:


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.


?€¢
To disarm the CTD system in the armed mode:


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.


?€¢
To disarm the CTD system when activated, alarming mode.


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.

Jun 24, 2016 | 2005 Saturn ION

1 Answer

My 1999 jeep wrangler alarm(avital) goes off and


try resetting alarm lower drivers side window and take out keys,disconnect battery and fully charge it , when you reconnect battery alarm will go off ,put key in drivers side door and turn key all the way open and all the locked 3 times then remove key that should reset alarm.

Oct 08, 2014 | Cars & Trucks

1 Answer

Doors locked so broke into car. Now car will not start. Do not have key to open the doors with only the key to start the car with. Because we broke in the alarm system was going off. We disconnected the...


It should be the same key for both and if u unlock the trunk with key the alarm should turn off so you can start . had the same problem . worse comes to worse have a key made at dealership or a portable locksmith come to you. about 80 for a key. You dont wanna mess with the anti theft or wires unless u really know what your doing

Mar 29, 2011 | 1996 Nissan Maxima

1 Answer

Land Rover Discovery II, 1999, Remote door opener hasn't worked in a long time. Have always opened door with key. Door lock now will not open door and does not turn with any resistance, sloppy, and will...


Pull the alarm Relay. RELAY center under hood upper driver corner.
Turn all lights off. Radio off. All doors closed.

  1. Remove Battery, Negative, First. Then Positive.
  2. Find Alarm Relay. Pull Relay. If also alarm Fuse Pull Fuse.
  3. Has been over 5 minutes that battery is disconnected.
  4. Turn ignition switch to RUN Position. Leave Driver door open.
  5. Now reconnnect Battery.
  6. Turn ignition to OFF. Close door.
  7. Mil illumination, (check ingine light), Should come on. ECU can not find Alarm. Try to start Vehicle.
I would like to know if this works for you.

Jos
questions & comments

Mar 26, 2017 | 2001 Land Rover Discovery Series II

1 Answer

Alarm sets itself with doors unlocked


An auto Electrition will bypass the alarm for you.As a temporary mesure remove the battery earth lead and leave off for 6 hours..

May 28, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Turn off alarm system for 1997 mercury sable


If this is a factory alarm all you have to do to turn it off is put your key in the door ,lock it then unlock it . if its not a factory alarm you will need the remote or have the entire alarm unhooked by a mechanic

Mar 24, 2009 | 1997 Mercury Sable

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

2 Answers

Electrical


Go inside the vehicle,dont put key in ignition, leave driver's door open, press the auto lock button on the driver's door, now close door while you are inside and watch on the dash the alarm enable itself, once it stops flashing open the door, this will set off the alarm, lights flashing horn blowing. Now take the key and put it in the drivers door and turn the key to stop the alarm. Now start you vehicle. If you want you can take the glove box apart to get to the vehicle security module to remove it. Dont unplug it unless the vehicle is running (must be running due to back up on computer) unplug the module and you will never have another problem with the security again and it does not effect your powerlocks.

Jul 09, 2008 | 1995 Jeep Cherokee

1 Answer

Help to disconnect my alarm


it sounds to me like you dont have a key less entry remote on the vehicle, I would check the small switch located behind the driver door lock tumbler (were the key goes in) and to do this
you need to remove the door panel, this switch knows when you
insert the key into the door and turn it to disable alarm, some times they break off - when the alarm goes off try unlocking the
vehicle on the passenger door.

Jul 05, 2008 | 2000 Nissan Maxima

Not finding what you are looking for?
2000 Volkswagen Beetle Logo

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...