Question about 1999 GMC Sierra

1 Answer

I need a retaining clip for the arm rests on the seats of a 1999 gmc serria z71 pickup GM saw fit to discontinue the part what can I do to fix problem junk yards won't take seats apart and auto parts stores don't have anything that works

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

Give these peoples a call they only sells GM-parts only its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com and i hope i have been some help to you Michigan Man.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to take off door panel of a 1996 GMC Yukon


  1. Remove the window handle by depressing the door panel and removing the retaining clip.
  2. Remove the door lock knob.
  3. Remove the armrest.
  4. Snap off the trim covers and remove the screws retaining the assist strap, if so equipped.
  5. Remove the 4 screws securing the lower edge of trim panel.
  6. Remove the screw at the door handle cover plate and the screw located under the arm rest pad.
  7. Remove the trim panel by carefully prying out at the trim retainers located around the perimeter of the panel.

Jun 13, 2015 | 1996 GMC Yukon

1 Answer

1988 chevy suburban door panel how do you remove it


I have a 1988 GMC pickup,should be simular,my windows are power windows,the switches can be carfully removed ,(which will have to be done),by depressing clips holding them in carefully tilt them out.
remove wires noting where they go on switch .
remove two screws from arm rest, located underneath arm rest.if you have manual windows there is a wire like clip inserted into a slot in crank handle holding it on to the regulator shaft, you may be able to get it with a screwdriver, but you can get a tool from part store that works much better.
after that gently work around the door pannel with flat screwdriver poping the plastic retainers out of the door, be carefull not to rip them out of the pannel.
I hope this helps!

Oct 07, 2011 | 1999 GMC Suburban

1 Answer

How do you remove the driver side door panel on a 2003 bonneville


The arm rest, and inside door handle trim have phillips retainer screws...both the arm rest, and door handle trim need to be removed before the door panel can be pryed up from the bottom...white plastic push in clips secure the panel...after all have been popped loose...you should be able to lift the door panel up at the window to remove...be sure to look for insulation liners that should be taped back into position before re-assembling...the push in plastic clips are also available at your parts store..."Help Parts" for GM models...Hope this helps:)

Jan 20, 2011 | 2003 Pontiac Bonneville

1 Answer

Removing arm rest on driver seat


using a flat blade tool like a small flat blade screwdriver, release retaining clip on arm rest and pull armrest from seat. slip the screwdriver between seat back and armrest and pry up on the retaining clip.

Dec 31, 2010 | 2001 GMC Yukon XL

1 Answer

How to remove a front door panel from a 2001 GMC Sierra


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Sep 11, 2009 | 2001 GMC Sierra Crew Cab

1 Answer

How to install passenger side glass on a 1997 gmc sierra 1500. power windows.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Remove the clips and screws securing the old window to the arm and slide it out through the top of the door (may need to be maneuvered out)

Sep 10, 2009 | GMC K1500 Cars & Trucks

1 Answer

Replacing passenger door handle


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Disconnect the rod connecting to the interior handle (replace this handle if you need). Otherwise pull back the weather seal and remove the bolts securing the outer door handle and disconnect the rod from that one...

Sep 10, 2009 | 1999 GMC Safari

1 Answer

Arm Rest on drivers side ''99'' Cherokee


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then you can pop the armrest out the back fo the panel

Jul 28, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Need to get door panel off to replace side view mirro on passenger side.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then pop off the cover beside the mirror and remove the bolts

Apr 30, 2009 | 2006 GMC Sierra 2500HD 2WD

1 Answer

Will 15 inch wheels fit a 1999 gmc sierra z71?


you have too get special rims made too clear the calipers

Mar 13, 2009 | 1999 GMC Sierra

Not finding what you are looking for?
1999 GMC Sierra Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...