Question about 2002 Toyota Tundra

1 Answer

I have a trundra with the rear sliding window, I need to know what type of glue must I use, or will work, to install my junk yard replacement? I have removed the old window and have not yet prepped for install

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 185 Answers

You need to use window weld black urethane. comes in a tube for use in a caulking gun. you can buy it at any parts store.

Posted on Oct 06, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Rear window will not go down

This is a common problem window regulator rusts badly and binds, they need to be replace, also on cold freezing days window will stay up and dislodge from regulator this happens very random on summer people driving around and window will stay put, have you try pushing down on yours? if window tabs aren't broken a glass shop will re-attach (glue it back) a dealer wont fix it they replace it, but if you need a regulator have window runs get replace to. good luck

Aug 29, 2014 | 2004 Toyota Sequoia

1 Answer

How to replace rear license plate light connector?

You'll need to obtain a replacement lamp holder. I do not know which particular year vehicle you have - nor do I know if it is the socket or if it is a connector between the socket and the vehicle's wiring harness (you mention both).

You may have luck at a local auto parts store for a socket. If yours is the type that consists of a lens and socket being one piece, you'll probably need to purchase a replacement at a Mazda dealer - or a local junk yard.

If it is a connector - again - the auto parts store, dealer or junk yard should have these parts. You can also cut the connector off and splice the replacement directly to the vehicle wiring if you cant get the part fast enough. If you do this, make sure the connection is tight and waterproof by coating the completed splice with silicone caulking or similar.

Jul 17, 2013 | Mazda Cars & Trucks

1 Answer

I have eletronic windows both plastic componts broke on the track inside

went to the junk yard, Grand-am's of the same year use the same parts, clips were glued to the window. Once removed bought solvent and more glue to replace on her car. (Three weeks later those also broke. :()

Mar 08, 2011 | 2001 Oldsmobile Alero

1 Answer

Window replacement

Junk yard part will work fine as long as it's the same size and is attached in a similar manner

Jun 22, 2010 | 1999 Pontiac Grand Am GT

1 Answer

How much does it cost to replace passenger rearview mirror

junk yard mirrior 5 to 10 dollars and the glue is 4 to 5 dollars make sure u clean window good before u glue it

Sep 29, 2009 | 2004 Chevrolet Impala

1 Answer

(1)I am replacing a 1995 Jeep Grand Cherokee Laredo(not Limited)Power steering pump (AC - 6 cycl.). I wnet to the junk yard and got one off a '93 I believe. I got the old one off and ready to install

Check with the junkyard where you got the may need to change the pump bracket with the pump, or use a different pump.
You don't have a separate tensioner the pump is on a slide mount and is the tensioner (why the parts guy is a parts guy not a tech).

Apr 26, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Removal and instalation of seats rear and front

First slide the seat to the back. You will find a bolt in the track on both sides. Remove them. Then move the seat forword and you will find 2 more bolts in the rear of the track. Be careful of the wires as you remove the seats! Frankster016

Oct 14, 2008 | 1993 Geo Storm

1 Answer

Car windows rear

this car has a cable regulated window,check to see if guide for cable is not worn or broken.These regulators tend to be very expensive.Look at junk yard .

Oct 02, 2008 | 1990 Nissan Maxima

Not finding what you are looking for?
2002 Toyota Tundra Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides