Question about 1997 Honda Accord

2 Answers

1997 honda accord no spark, motor turns over just fine, we've changed the distributor cap, rotor button, spark control module, coil, and the crank sensor in a period of about two weeks. and each thing we replaced the car ran fine for about 3 days then it died again. No oil on plugs. when we have the no spark problem you wait 20 to 30 min car will start

Posted by on

  • citgolube Oct 06, 2009

    we said we already changed coil fusses and cap rotor cranksensor control moduel so advise giving did not help

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 2,899 Answers

Sounds like the coil. Can you try it with the old coil. Coils are sometimes sensitive to temperature. Try it in cold and worm temps.
Hope this helps.

Posted on Mar 23, 2015

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 28 Answers

Could be the ignition coil or ignition module. Also check the ignition fuse.

Posted on Oct 06, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: 1997 gmc jimmy is misfiring,

BAD CRANKSHAFT POSITION SENSOR WILL CAUSE CYLINDER MISFIRE.HAVE VECHICLE CODE SCAN TO CHECK FOR CKP SENSOR CODE.

Posted on Aug 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Still at a lost with my 1996 4 cylinder. Honda Accord .won't start no visible spark at the. Ignition coil.,distributor cap or wires changed coil, and the main relay, problem still exists, won't start


There's a crankshaft sensor and it is possible to have a few if the teeth of timing belt missing. Which the belt wikl look fine. But will not turn the cam. Which will leave you with out fire. Chech the rotor under distributor cap and see if it is turning? No turn? Timing belt is bad. If it turns? Crank sensor is bad.

Jan 31, 2017 | 1996 Honda Accord

1 Answer

Engine died while driving, no spark, replaced coil, now starts, idles, runs well at low rpm, but misfires when accelerating. No check engine costs thrown. What should I check next.


Change your ignition module. The distributor is a weak point of the Honda, I will always change out the whole thing than just try the coil.

Jun 05, 2015 | 1996 Honda Civic

1 Answer

MY 1996 honda accord has fuel but no spark


Check Ignition system:
- Distributor cap, rotor, wires.
- Ignition coil.
- Ignition module.
- Distributor.

Apr 21, 2013 | 1992 Honda Accord

2 Answers

I have no spark any reason that comes to mind?


possible distributor. most of the time spark is produced by distributor

Mar 25, 2011 | 1992 Honda Accord

2 Answers

It will crank, but wont start. spark plugs are not firing


Most of the time,on that model,it is the distributor,if the timing belt has not broken,pull the distributor cap,and turn the engine over to see if the rotor button is turning,if it is not,then the timing belt has broke.if the rotor button turns,replace the distributor.

May 09, 2010 | 1992 Honda Accord

1 Answer

1997 Honda Prelude 177K. I have done the


Unfortunately you probably need a new distributor. There are three pick-up coils mounted down inside the base of it. They go bad quite commonly. The unfortunate part is; the new distributor will come with a new cap, rotor, coil and module...which you have already bought. The distributors are not that expensive though, maybe you can sell the extra parts???

Feb 19, 2010 | 1997 Honda Prelude

2 Answers

OK 1997 gmc sierra 5.7liter 4x4 replaced coil and


Doesnt this engine use a crank position sensor? mounted on timing chain cover.I would check that first

Oct 17, 2009 | 1997 GMC Sierra

5 Answers

1992 Honda Accord LX won't start - ignition problems


I would remove the distributor cap and crank the engine over . If the rotor does not turn , then you need to replace the timing belt. The timing belt needs to be replaced every 60 K. If the rotor turns then make sure you have spark to a spark plug. Run a compression test on each cylinder. The basics to run are compression, spark, fuel and timing.

Mar 11, 2009 | 1991 Honda Accord

1 Answer

The distributor not firing


tap lightly on dist. not on cap while someone cranks motor,be careful of moving parts,if it starts change ign. module in dist. if not check cap rotor,coil and power to ign.module,if theres power to module my bet would be on ign. mod

Feb 20, 2009 | 1990 Honda Accord

Not finding what you are looking for?
1997 Honda Accord Logo

1,174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...