Question about 1992 Honda Accord
Remove the bumper, you will then see the bracket that holds the bottom of the light to the car. the rest is pretty self explanitory once the bumper cover is off
Posted on Oct 06, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: headlight assembly
you will have to remove the front bumper cover to get to 2 bolts and also the grille to get another bolt off also there are are a total of 5 bolts that hold it in. be careful taking it out as you can crack the mounting brackets for the assembly just be patiece it will come out.
Posted on Dec 09, 2008
SOURCE: Bumper cover removal
It is a little more complicated than that. There are two nuts below the headlight assemblies in the engine compartment. You will need to remove the battery and overflow bottle to get at the one on the passenger side. Remove the turn signals in the bumper, then there are 2 or 3 bolts holding a mounting bracket behind the each of the turn signals. There are a number of bolts with washer heads and reatiners on the underside of the bumper as the previous responder indicated.
Posted on Jan 26, 2009
the bolts are at the fender and bumper edge from the corner feel the underside its a 10mm bolt just take it out the rest are retainers/ Please rate my response thank you very much
Posted on Jan 30, 2009
I gather that you mean taking out the lens, and cleaning the inside. This piece is glued to the plastic assembly, and is very easy to break trying to take it apart. Most of the time, the problem is just moisture inside. On a hot sunny day, take out the main bulb ( no need to dismount the assembly) and let it sit for a couple of hours, and most of the moisture will vent away. If it is just the right headlight that gets fogged up, you might be losing coolant from overfilling. Also make sure all rubber gaskets on the bulbs, seat firmly against the headlight assembly.
Posted on Sep 10, 2010
Tips for a great answer:
How to Replace a Headlight Switch http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html
How to Replace a Headlight Assembly
How to Replace a Park Light Assembly http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html
Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html --------------- Honda Headlight Assembly Removal
How to Replace a Headlight Door http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html
How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html
• Working of Headlight switch?
• Both headlight bulbs blow together?
• Car headlight bulbs don't last long?
These will help.
Nov 23, 2012 | 2010 Mercedes-Benz Sprinter
Jun 24, 2012 | 2001 Honda Accord
Sep 05, 2010 | 2002 Honda Accord
Nov 07, 2009 | 1999 Honda Accord
Jun 28, 2009 | 1990 Honda Accord
Apr 06, 2009 | 1992 Honda Accord
Jan 29, 2009 | 1992 Honda Accord
Dec 06, 2008 | 2000 Honda Accord
Oct 20, 2008 | 1995 Honda Accord
770 people viewed this question
Usually answered in minutes!