Question about 1994 Land Rover Discovery

1 Answer

Fitting a electric wing mirror to discovery 300tdi 1994

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 175 Answers

Is it a replacement or a retro fit to a manual window?

Replacements are really easy. Wear stout gloves. Move the mirror glass so that the edge nearest the car is as far forward as possible. This will push the out edge towards the back of the car. Slip your fingers (or an old thick piece of cardboard / lolly stick - that sort of thing - something that won't scratch) behind the outer edge and prise it off its retaining clips. Be careful - you only want it to pop out gently.

Once you can see the works behind, its all fairly straightforward - four screws hold the motor in place, and the wires are already there.

Assembly is reversal of the pop out - i.e. make sure it "pops" back into the clips, otherwise it will dangle off by the wires "at the most inappropriate point".

More details in the Haynes manual - section 12.15 Body work and Fittings.

Posted on Feb 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I identify if my discovery is a 200tdi or 300tdi the engine No is 18L03311A


You need to call the dealer and give them the VIN # its on the registration as well as the dashboard on the drivers side look through the windsheild in the corner on the drivers side . The 18L #is a part # the VIN # WILL IDENIFY aspects of the entire vehicle

Mar 11, 2012 | 1994 Land Rover Discovery

2 Answers

Fitting fiat doblo wing mirror


wing mirror or door mirror is held on by three screws on the inside of the door behind the triangular piece of trim which just pulls off

Nov 29, 2010 | 2011 Fiat 500

2 Answers

Engine turns over very slowy.


check battery connections are clean and tight check main engine to body earth cable for condition and security check connections at starter motor to check for engine earth problem put a good quality jump lead between bat neg terminal and engine crank and see if ok

Jan 22, 2010 | 1995 Land Rover Discovery

1 Answer

Wing mirrors on 06 plate Golf TDi


Has it ocurred to you that your wing mirrors are not the electrically folding type, most are not. The switch on the drivers arm rest for adjusting the mirrrors will have a separate position for folding if yours fold. The resistance to fold by hand is very stiff as you have to overcome the spring tension, even when folded by hand they do not fold as flat as you might think.
I purchased a 2006 Golf 5 GT Tdi last year it had £5000 worth of factory fitted options but did not have electrically folding door mirrors - hope this helps.

May 14, 2009 | 2006 Volkswagen Golf

1 Answer

Alarm and imobiliser on a discovery 300tdi


before you cut or rewire the alarm, when welding the disco although disconecting the battery protects the battery, the imobiliser holds current, this my have gone into system factory setting, so it my be worth getting the imob and key re-conected, this is a cheap job at any Landrover specialist. hope your running smooth soon

Apr 27, 2009 | 1997 Land Rover Discovery

1 Answer

Problem with discovert 300tdi automatic


If you start it, and drop it into 1 does it move? If so, sounds like the sprag clutch (iirc) has gone - this is the clutch that allows you to freewheel at lights and what not. Common problem on the Auto gearboxes. Will need a rebuild I'm afraid.

Jan 01, 2009 | 2002 Land Rover Discovery Series II

3 Answers

Replacing the wing mirror on an audi A4


TO FIT A NEW MIRROR FIRST CONNECT THE WIRING PLUGS THEN ENSURE THE FRICTION PIN ON THE BACK OF MIRROR ENGAGES IN THE SLOT (OUTER EDGE OF MIRROR) PRESS FIRMLY AT THE CENTRE OF THE MIRROR TO ENGAGE THE RETAINING CLIP....IF YOU NEED TO REMOVE MIRROR INSERT A FLAT TOOL BEHIND THE LOWER EDGE AND LEVER IT FROM THE CLIPS.. HOPE I WAS OF SOME HELP TO YOU...

Nov 20, 2008 | 2004 Audi A4

1 Answer

Chuffing noise


Check the turbo hoses.......One hose must damadged.....Reply me....I'm working for Landrovers..Specialy 300tdi.....
Ruwan.

Aug 24, 2008 | 1994 Land Rover Discovery

Not finding what you are looking for?
1994 Land Rover Discovery Logo

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...