Question about 2001 Hyundai Tiburon

1 Answer

HOW DO I ADJUST THE LOW BEAM HEADLIGHTS TO SHINE

HOW DO I ADJUST THE LOW BEAM HEADLIGHTS ON A 2001 TIBURON TO SHINE FURTHER DOWN THE ROAD.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i adjust the head lights in or out on a 2004 dodge stratus---or can i?


If by in or out you mean make the beam pattern move closer or farther away from the vehicle, then yes you can. There are adjustment screws (usually 2) on each headlamp assembly. One raises and lowers the headlamp. This will move the beam closer to (down) or further from (up) the vehicle. The other will adjust the beam from left to right. The screw at the top (or bottom) is for the vertical and the screw on the side is for horizontal. The easiest way to adjust the headlamps correctly is to, at night, go to a location where you can park about 50 feet away from a blank wall. Turn on the low beam headlamps. In order to "properly" adjust the lamps, the left side headlamp's main beam should cast is "ring" on the wall at about the centerline of the car (left-to-right adjustment), with the bottom of the beam just reaching the ground (vertical adjustment). The right side headlamp should be adjusted to shine along the right edge of the vehicle (where the white edge line would be) at the 50 foot mark (left-to-right) and the height should be the same as the left headlamp - beam just touching the ground. Many people make the mistake of pointing them straight down the road. This causes "overspray" into the oncoming lanes and blinds oncoming motorists. I'm sure you've experienced the annoyance of someone coming toward you with their lights right in your eyes. That is caused by misadjustment. If you get the low means right, the high beams will work well for approximately 200-300 feet down the road, which, unless you are night racing, is more than enough distance to see well to drive.

Dec 10, 2015 | 2004 Dodge Stratus

3 Answers

How to adjust halogen headlights (too low now)


there example of how to do it i would been more acurate but you didnot mention the year make and model hope it help you

Apr 08, 2015 | Cars & Trucks

1 Answer

Mazda Astina 1991


Find level ground with a wall. Drive up to the wall and mark where the centre of your headlights are on the wall with a piece of tape. Back up 20 feet and turn your headlights on high beam. Using the adjusting knobs make each light shine directly on the spot. Low beam adjusts itself down and to the left/right (away from oncoming traffic depending on what side of the road you drive on)

Nov 17, 2013 | Ford Cars & Trucks

1 Answer

I have a 2003 kia spectra. Can the headlights be adjusted. On low and high beams they seem to be set to low. I feel they should shine out futher to be able to see more while driving at night


the headlights can be adjusted but you can't adjust the high & low beam separately, you can only adjust the light as a unit unless you have a separate high & low beam lights ( twin lights) ......hope this helps......cheers.

Sep 05, 2011 | 2003 Kia Spectra

1 Answer

How do you adjust headlight on 2008 uplander


If you look at the top of the head light assembly with the hood open just past the top rubber seal, you will see an alan head adjustor screw. This will adjust the low beam light up and down. the high beams are fixed. I would suggest shining your headlights on to a wall or garage door to get them to the same hight you need.

I am assuming that the design was not changed from my 2005 updander to your 2008. I had to adjust mine while on a road trip. We had a lot of people and stuff in my vehicle which made the headlights shine higher than normal. I was getting a lot of on commig traffic flashing. I was able to ajust them down fairly easy with those adjustor screws. Hope this helps.

Nov 30, 2010 | 2005 Chevrolet Uplander

2 Answers

Low bean headlights don't work but high beam does on 2004 Hyundai Tiburon. How do you know what the problem is.


Check fuse box in engine bay (should be near battery) inside should be the fuse for high beam and low beam.

Aug 24, 2010 | 2004 Hyundai Tiburon

1 Answer

I Have an Audi a4 Quatro 2004 model. Adjust Low Beams?


There are two adjustment points (screws). For example left headlight: you will see one point near the end of left wing, at bottom side through a wing hole. This is for vertical plane headlight beam adjustment (up-down). Another one point is against water radiator side. This is for horizontal plane headlight beam adjustment (left-right).

Nov 19, 2009 | 2004 Audi A4

2 Answers

Headlights shine too low.


the 1, 2 , 3, and stop are for the memory seats and outside mirrors.

Nov 15, 2009 | 2001 Audi A6

5 Answers

How do i adjust my headlingt on a 2001 suzuki xl7


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Nov 14, 2009 | 2001 Suzuki Xl 7

1 Answer

High beam adjustment, how do you do it seams mine are reaching for the stars thaks john in wisconsin


two screws on each headlight control the direction the headlights are aimed. One screw, usually at the top but sometimes below the headlight, adjusts the headlight up and down. The other screw, located to one side, controls the headlight from right to left. Turning the appropriate screw one direction or the other will change the direction the headlight points.
In order to aim your headlights you need to have a flat vertical surface you can aim your headlights at in front of a level surface on which to park the car. If your driveway is level your garage door is the perfect place to aim your headlights.
The tools you will need for this job are simple. Masking tape is used to mark where the headlights are to be aimed and a screwdriver is needed to adjust the headlights. A tape measure will be necessary to measure the distance of the vehicle to the surface you're using to check the aim and to measure the up and down distances from your marks.
To start you will want to pull your car quite close to the surface you are using to aim your headlights. This is done to allow you to mark, with the masking tape, where the headlights are on the car. With the car right up against the vertical surface, and your low beam headlights on, the center of the beams will be directly in front of the headlights. Use your masking tape to mark straight across where the headlights are shining. Use short pieces of masking tape to mark vertically the center of the low beams.
, back your car about 25 feet away to check the alignment of the headlights. The brightest spot on your low beams should be about two inches below the masking tape and slightly to the right of the vertical marks. Use the adjustment screws to move the beams up and down, and right and left, until the headlights are aimed properly.
If your car only has two headlights, that's all you need to do. With the high beam lights integrated into the single headlight there is no further adjustment possible. If you have a four-headlight system you will next need to adjust your high beams. Switch to your high beams and adjust them so they shine just below the line and are centered between your two vertical marks.

good luck

Nov 05, 2009 | Volkswagen Jetta Cars & Trucks

Not finding what you are looking for?
2001 Hyundai Tiburon Logo

1,859 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...