Question about 2004 Nissan Quest

2 Answers

TCS/SLIP/Service engine Lights all came on. the van will not go faster that 15mhp. When i push on the gas, it doesn't rev. The RPM will not go past 1. I tried park the van in reverse on a slight incline, the van won't go up the incline. The temp this morning was 40 degrees.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Sounds like your quest is stuck in fail safe mode, most likely could be a problem with your electronic throttle body.

Posted on Oct 07, 2009

  • Jud fiore May 02, 2012

    Get a diagnostic check at any car parts place. More than likely, it is a p0731 error code. That could mean that you are low on transmission fuel, or it is most likely the shift solenoid. Not too expensive to replace. Also check the fuses for the shift solenoid. Happened to me. Was an easy fix.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It is most likely the shift solenoid. A diagnostic check would help you determine the issue. The code that will come up is p0731

Posted on May 02, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my rpm,s take too long to come back down


Clean throttle body,change air filter,then could be IAC sensor next TPS sensor(RPM).

Sep 28, 2014 | Cars & Trucks

1 Answer

TCS OFF Slip


probably a wheel speed sensor has kicked the bucket, which is why the tcs light came on , have to check your ABS system to see if its functional.

Sep 11, 2012 | 2003 Nissan Altima

1 Answer

My rpm rev's past 3 car stalls then shifts...sometimes won't shift


Due for a transaxle rebuild,common on that veh

The fact you continued to drive it when it won't
shift correctly & has been slipping, your done

Aug 30, 2012 | 1998 Plymouth Grand Voyager

1 Answer

How do you reset tcs/slip light on a 1999 infinit q45


Hi there:

Pull the codes to get started. Normla process is when the slip light will flash on and then go off. TCS is your Traction Control System. It is normal for it to go off If the rear wheels are slipping. You may have worn tires or you are driving on ice or snow. Are you on a slippery surface when this happens? You can always shut the system down by pressing the TCS off button in the center console.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 17, 2012 | Infiniti Q45 Cars & Trucks

1 Answer

I have a 2000 Mercury Villager Mini Van Sport. When I am in park I can rev the engine with no problens, when I put it in gear & push on the gas it spits & sputters & can't hardly get any...


have the fuel pressure checked if it is ok then you most likely have a bad cam or crank sensor.. is the check engine light on? that will help to pinpoint the issue. if no check engine light then most likely its a fuel pump.

Jul 12, 2012 | Cars & Trucks

1 Answer

TCS warning light is on. Check engine light is on. Reduced engine power light is on. the accelerator wont work when pressed all the time. when revving it up it will not rev over 3k in neutral.


There are literally thousands of codes that can cause the check engine light to come on. There is no way to guess why yours is on based on your symptoms. Many auto part stores will scan your engine computer and give you a print out of the codes for free, unless you live in CA. We would need to know what these codes are to give you an accurate reason you are having issues. FYI, modern engines won't rev past 3000-3500 rpm in neutral. This is to prevent engine and torque converter damage.

Feb 27, 2011 | 2005 Saturn VUE

2 Answers

How do you use the traction control system. should the dashboard light be on or off


how the tcs works is when active light on dash will be on you will only feel it working tcs uses wheel speed sensors that when your tire slips and spins faster than other wheel like spinnig out on on ice snow gravel the tcs unit will use a controlled misfire that will **** or jolt giving traction and will stay engaged until spinnig stops or you let off gas basicaly it uses the engine to **** not allowing wheels to spin out to get a feel turn on tcs find a gravel or snowy road accelerate trying to make the car slip you will feel car start to **** it works well try it so you get a feel incase you trigger tcs and catches you off guard

hope this helped
plz vote comment if any more questions reply

Jan 18, 2011 | Saturn Aura Cars & Trucks

2 Answers

P1320 trouble code plus


The P1320 code is essentially a coil primary voltage problem. This is traceable using a labscope or accurate DVOM and perhaps you can isolate one or two coils that still work but are close to failure...but there is a nissan service message recommending replacement of ALL coils with updated/improved models to prevent this type of failure. TCS/SLIP is traction control. Most likely you have a speed sensor issue. Be aware, some vehicles can falsely illuminate TCS because of low tire pressure in a single wheel.

Sep 09, 2009 | 2000 Nissan Maxima

3 Answers

Emitting white spoke also won't accelerate properly


I have worked a similar situation before, the white smoke that you see more than likely mean that you have a blown head gasket. That's antifreeze that blowing out the tail pipe, with a blow gasket it can cause the vehicle to **** and have poor acceleration. The sudden jerking motion can trigger the TCS- traction control system. Its almost like the vehicle is slipping when it **** like that, So I do believe that you need to replace the head gasket, and not a complete overhaul. Good Luck

Dec 11, 2008 | 2004 Nissan Quest

Not finding what you are looking for?
2004 Nissan Quest Logo

Related Topics:

1,062 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...