Question about 1996 Chevrolet Cavalier
In air tube between air filter and throttle body
Posted on Oct 06, 2009
Testimonial: "thank you"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your looking to replace them, wich is what most do today, it is cheaper to purchase a axle with new cv joints than to rebuild them. It is a very simple job in todays cars, remove tires remove lower tie rod , remove nut in center of the rotor and pull wheel assembley to the side hanging from the strut, pull axle out replace the transmission seal, push new axle in. When putting wheel assembley on, use a hydraulic jack on bottom of the rotor to push it to the axle splines and put the new nut on .
Posted on Jan 15, 2009
SOURCE: locked out of 96 chevy cavalier
You can use a wire hanger with a hook bent onto the end fairly easily if you slide it down the window and try to feel around to hook onto the lock mechanism. It may take a bit of patience, but I got into my 2000 with not too much trouble. Then do what I did immediately afterwards - get another key cut to keep in your wallet...
Posted on Jun 21, 2009
The Intake Air Temperature (IAT) sensor determines the air temperature
inside the intake manifold. Resistance changes in response to the
ambient air temperature. The sensor has a negative temperature
coefficient. As the temperature of the sensor rises the resistance
across the sensor decreases. This provides a signal to the PCM
indicating the temperature of the incoming air charge. This sensor helps
the PCM to determine spark timing and air/fuel ratio. Information from
this sensor is added to the pressure sensor information to calculate the
air mass being sent to the cylinders. The IAT is a two wire sensor, a
5-volt reference signal is sent to the sensor and the signal return is
based upon the change in the measured resistance due to temperature.
Fig. 1: The IAT sensor is located in the air cleaner outlet tube-2.2L engine and 2.4L engine
Posted on Apr 11, 2010
Tips for a great answer:
Jul 23, 2015 | Cars & Trucks
Nov 11, 2014 | 2004 Chevrolet Cavalier
Feb 02, 2014 | 1996 Chevrolet Cavalier
Aug 25, 2012 | 1996 Chevrolet Cavalier
Jul 02, 2011 | 1996 Chevrolet Cavalier
Oct 29, 2009 | 1989 Chevrolet Cavalier
Sep 05, 2009 | 1996 Chevrolet Cavalier
Apr 07, 2009 | 1996 Chevrolet Cavalier
Aug 23, 2008 | 1988 Chevrolet Cavalier Z24
389 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: