Question about 1998 Ford Taurus

1 Answer

I need to know how a serpetine belt fits on a ford taurus.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

There is a label under the hood which covers this info. Look for it, it is probably on the hood or near the radiator and is most likely covered in dirt.

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram of serpetine belt on 2000 ford taurus v6 single over head cam


i hope this works thes new sight format is a pain please let me know if there is any thing else you need.


9_28_2011_10_11_09_pm.jpg9_28_2011_10_12_36_pm.jpg

Sep 28, 2011 | Cars & Trucks

1 Answer

2004 ford taurus chirping noise when engine revs


Hello, There are several things which can do this. First, cut off the A/C and then rev the engine as before. If the chirping goes away, the noise was either the A/C clutch or the Serpetine belt slipping with the load. For the A/C clutch, you can try a little rust removal between the drive plate and the pulley with the engine OFF. You can use sandpaper and try to knock off the rust. Then put a little oil on to condition the metal. Then try it with the A/C on.

If the chirp is still there, you have to check bearings on the Pulley tensioner, Alternator, Water pump, and Power steering. It is possible for the Pulley tensioner to have a weak spring or you may have a stretched Serpetine belt. This condition would cause the belt to skip under a load. If the belt is checked with small cracks, just replace the belt. Take off the tensioner and compare the spring tension and wobble in the pulley to a new unit at the Autoparts store.

If still no success, the chirp could be a water pump bearing. The old way off using a piece of wood on the housing of a part while the engine is running is dangerous, but effective. I believe you should have already found your problem before this measure is needed. Dry Serpetine belts make quite a lot of noise and is probably your problem.

I hope my Solution is very helpful to you.

Jun 28, 2011 | 2004 Ford Taurus

1 Answer

Diagram for serpetine belt on a 2002 ford taurus


http://1.bp.blogspot.com/_VPbNs6pUty8/SP5H7sWiMUI/AAAAAAAAABc/qrTGQoBjaBg/s400/pulley.gif
thats a diagram. copy the link to view.

Jan 10, 2011 | 2002 Ford Taurus

1 Answer

I need a serpetine belt routinig diagram for a 2006 for taurus


the diagram sould be located under the hood on the cowling in front of the radiater

Aug 15, 2010 | 2004 Ford Taurus

2 Answers

How to reroute your serpetine belt on 94 taurus cause the ac compressor locked up


u do not reroute the belt u buy an ac delete pulley, remove the compressor and install pulley where compressor used to be, contact ford for the pulley. very easy job.

Sep 14, 2009 | 1994 Ford Taurus

1 Answer

Air condition noise


Either the belt tensioner is going bad or the compressor or clutch is going bad. Is the belt tight? Check the deflection in the belt if it is to loose replace the tensioner. Also double check the belt part number and make sure they sold you the correct length belt.

Feb 16, 2009 | 2001 Ford Taurus

1 Answer

Compressor getting hot


it's probably the compressor on it's way out pretty common in those style ford's

Nov 17, 2008 | 2003 Ford Taurus

1 Answer

Surpintine belt diagram


Two places of information. One is under the hood, usually form on the engine. A small white diagram that will show the proper routing for the serptine belt.

Second. Purchase a auto repair manuel at the parts store and it will show the routing the serpetine belt. If you do not have the correct routing you will never get the belt on.
Bill

Oct 24, 2008 | 1992 Buick LeSabre

Not finding what you are looking for?
1998 Ford Taurus Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...