Question about 2003 Pontiac Vibe

1 Answer

2002 PONTIAC VIBE, 1.8 L CODE SAYS MISFIRE ON # 2 CYL. ? NEED TO KNOW FROM L TO R CLY LOCATION?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 426 Answers

The front of the engine is on the passenger side, so from right to left 1-2-3-4

Posted on Oct 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Sorento began with code P0305, cyl #5 misfire. Inspected and replaced plugs, wires, and coil pack on cyl #2. Repair shop told me cyl #5 injector bad so they replaced. Still has misfire.I suggeste


If you had code P0305, I don't know why they would have done anything to the #2 cylinder but if they have already replaced the plugs, wires and injector; here are a few more items to check:
1) Check connections from ECM. Look for any corrosions or bent/broken pins.
2) Check the fuel line pressure
3) Check the engine compression
4) And if the above are good, then you will probably have a defective ECM

Nov 28, 2014 | Cars & Trucks

1 Answer

05 navigator codes po012 intake " A " camshaft position over ******** bank 1 po302 random misfire po302 cyl. 2 misfire po303 cly. 3 misfire po304 cyl. 4 misfire po2195 o2 stuck lean bank 1 sensor 1 po2196...


there is nothing wrong with the timing chain position . Just a series of sensors that have gone outside the set parameters so if you check and change each one you will clear the faults.

Jan 03, 2014 | Lincoln Navigator Cars & Trucks

3 Answers

Have a missing on 08 f150 4.6 went to auto zone and got a code reading and it said probable cause is a sludge throttle body/air flow got cleaner for it and clean throttle body but it still misses some one...


it is possible for it to be a coil, the thing with fords are that it takes alot of time for the misfire counter to turn the check engine light on and at the smae time set a code for missfire, if you have a code reader available check to set if there is a po301-po302 -po303,and so on the p is for power tran the o is that it is a generic code 3 indicateds misfire, 01,02 indicate which cly. is misfiring , alot of time you have to drive the fords for awhile before it will set a misfire code. if you have a good scan tool you can go to mode 6 and check misfire counters for which cly. is missing. than you can check compression in that cly, chec coil and plug.

Oct 30, 2013 | Cars & Trucks

1 Answer

Location of bank one o2 censor 2004 poniac vibe


You have a 4 cyl engine so there is only one bank.
The sensors are in front of and after the catalytic converter in the exhaust pipe.

Jan 11, 2013 | 2004 Pontiac Vibe

2 Answers

03 X-type 2.5 129k. Plugs replaced @110k, MotorCraft platinum plus, all upper intake gaskets,breather hose,cleaned all connections. Problem-- stumbles under load, jerks. Code P0301 # 2 cyl. misfire....


P0301 misfire #1 cylinder you are more than likey face with a COP(coil on plug) failure check the connection on #1 COP and inspect the harness if good replace COP#1

Aug 01, 2011 | 2002 Jaguar X-Type

2 Answers

I have a 2000 lincoln ls 3.9 it has a misfire cly 4. I change spark plugs, coils, injector. and the intake seal. It still misfire cly 4. I also check compression it all same i all cly read 120 psi. it also...


Check the fuel injector..some time they give the same code like misfire..if it is good, than go ahead and check the wiring harness if there is a signal coming from it..if no signal..then follow the wire back to the source to see if there a short or open...good luck

May 05, 2011 | Lincoln LS Cars & Trucks

1 Answer

Check Engine Light coming on


get the soft ware up grade. and have the coils checked.

Mar 03, 2010 | 2002 BMW Z3

1 Answer

Cylinder Misfires


It could be your spark plugs or a coil. To see if it's a coil move the coil from #5 to #6 the miss will change to that cylinder with code p0306 and change #1 to #3 and see if it changes to p0303. If it does replace all the coils. You change all coil because if one or two go you know the rest are not far behind

Aug 07, 2009 | 2005 Honda Accord

2 Answers

Igniton coil on a 04 silverado 5.3


Back of Engine

#8 cly #7 cyl


#6 cly #5 cyl Firing Order IS

#4 cyl #3 cyl 1-8-7-2-6-5-4-3

#2 cyl #1 cyl

Front of Engine

A Very CRUDE But Eficiant Diagram of Your 5.3L Engine and its Cylinders LOCATION'S In the ENGINE. #5 Ignition Coil is on Driver Side of Engine and is the SECOND ONE FROM THE REAR OF THE ENGINE.THIS is TRUR AND CORRECT IM POSSITIVE !!
P L E A S E Remember to RATE ME Myst folks do not bother to RATE US

Apr 18, 2009 | 2004 Chevrolet Silverado

2 Answers

Need to know firing order


6 cly firing order is 1-5-3-6-2-4
8 Cyl firing order is 1-8-4-3-6-5-7-2
4 cly firing order is 1-3-2-4

Oct 30, 2008 | 1986 Jeep Comanche

Not finding what you are looking for?
2003 Pontiac Vibe Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...