Question about Toyota Corolla

Open Question

Please tell me the tension required for refitting head on toyota 5K engine thanks erwin

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where should the time chain dots be on 5k toyota engine if the no 1 piston is in fire position

comment on the engine capacity . make and model and year and you may get an answer to the question as a 5K toyota engine could be in things other than cars

Sep 06, 2015 | Toyota Cars & Trucks

1 Answer

How to solve hydraulic tappet noise in Toyota 5k engine I replaced the head with another hea with new valve seals etc

If you are using the recommended oil for your engine then use a higher viscosity oil. Avoid synthetics with high flow rates. How to Fix Noisy Tappets Lifters

Mar 04, 2015 | Toyota Cars & Trucks

1 Answer

My 5K engine is not idling how can i fix it

Start by cleaning the throttle body. There are small ports inside that may be clogged. Possible new throttle required in some instances.

Apr 10, 2014 | 1995 Toyota Hi-Ace

1 Answer

5k toyota timing chain marks

Place the marks in the position before removing the chain with the ignition timing mark on TDC do not move any thing after you remove the chain until the new chain is back on.

Nov 04, 2013 | Cars & Trucks

1 Answer

Tensioner pulley

requires special tools to get in there.
A normal box wrench won't give you access to the tensioner bolt.
Maybe a 3/8 " breaker bar to fit into the tensioner square hole.
It's very tight quarters,there.

Easier to loosen the engine mount nuts and jack up the engine,slightly.
NOT on the oil pan.

Use a floor jack and a 12 " 3/8" drive extension onto one of the oil pan bolt heads. 12 mm.

Mar 09, 2013 | Toyota Camry Cars & Trucks

1 Answer

There is no nut on the tensioner,just a weird looking thing witch a socket won't fit

Belt tensioner? Usually takes a 3/8 " ratchet or 3/8 " breaker bar to rotate the belt tensioner.
Get in there with an inspection mirror(It's tight quarters!).
Some Toyota's require a skinny wrench to fit onto the 14 mm bolt head.Some are 17 mm.
Socket won't get in there.
Some cars require loosening the engine mount and jack the engine up to gain enough clearance!(Mitsubishi)

Feb 21, 2013 | 2004 Toyota RAV4

1 Answer

Why my toyota 5k engine to much smoke when i'm in nutral?

Could be a catalectic converter. If its partly clogged, it will build up at an idle and at a higher speed you would push more exaust thru

Jan 19, 2013 | 2005 Toyota Corolla

2 Answers

Kia sedona instructions to replace serpintene belt

Hi, Here is the procedure for a 2002 KIA Sedona 2.9, Engine code KJ. I I can not guarantee the followingprocedure is exactly the same as your car.

Warnings and recommendations Unless otherwise advised by the manufacturer, the following procedures are recommended: Always fit a new timing belt after removal Check the tensioner and idler pulleys; renew if necessary Never turn the engine in the direction opposite to that of normal operation Check the belt(s) for cracks, fraying, wear and oil contamination Note: The engine must be cold before timing belt adjustment Note: Avoid bending, torsion or traction General Before disconnecting the battery cable, check the audio system security code kj_t_dba_uk_6.jpg
Always check the timing marks before timing belt removal Removal Disconnect the battery Remove the radiator upper hose Remove the fuel filter unit Note: Do not disconnect the hoses carniv_j3tci_t_dba_uk_3.gif
Remove the engine mount kj_t_dba_uk_4.gif
Remove the bracket Remove the right front wheel Remove the air-conditioning drive belt Remove the ancillary drive belt Remove the ancillary drive belt tensioner Remove the coolant pump pulley Remove the crankshaft pulley Remove the timing cover(s) kj_t_dba_uk_6.jpg
Align the timing marks Loosen the tensioner kj_t_dba_uk_7.gif
Remove the tensioner Remove the timing belt Check the gearwheels, tensioner and idler pulley(s) for damage and wear Renew if necessary Installation kj_t_dba_uk_6.jpg
Check the timing marks Fit the timing belt kj_t_dba_uk_7.gif
Fit the tensioner kj_t_dba_uk_3.gif
Adjust the tensioner kj_t_dba_uk_1.gif
Align the marks on the tensioner Tighten the tensioner (23.5 Nm) Rotate the engine 2 rotations by hand kj_t_dba_uk_6.jpg
Align the timing marks kj_t_dba_uk_8.gif
Check the tensioner Repeat the procedure if required Refit the timing covers Refit the crankshaft pulley (373 - 392 Nm) Refit the coolant pump pulley (17.6 - 28.4 Nm) Fit the ancillary drive belt tensioner Fit the ancillary drive belt Refit the air-conditioning drive belt Refit the front right wheel (88 - 108) kj_t_dba_uk_4.gif
Fit the bracket (36.2 - 53.9 Nm) Refit the engine mount carniv_j3tci_t_dba_uk_3.gif
Refit the fuel filter unit Refit the radiator hose(s) Refill the cooling system Check for leaks Reconnect the battery earth cable Torque settings Tensioner: (23.5 Nm) Timing covers (6.9 - 9.8 Nm) Coolant pump pulley: (17.6 - 28.4 Nm) Special tools Special tools are not required

Jan 06, 2013 | 2004 Kia Sedona

2 Answers

Timing marks and how to set timing on toyota corrolla 1994 canm belt snapped and need to replace

Both 7afe and 4afe (engines for 93-97 Corollas) are non-interference engines. It's highly unlikely there is any damage to the valves.

Mar 18, 2010 | 1994 Toyota Corolla

1 Answer

Do you have any inf on refitting timing belt on a toyota camry sv21 1.8 petrol engine thank you.

the only thing that might work is there is a tension bar on one of the pullys you can try to tighten it not replace it

Jul 08, 2009 | 1988 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides